I have created a part in Inventor that is not on the ground plane, is there an easy way to quickly re-position this on the ground plane ?
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
why can't i sketch on the ground plane? If i turn on the ground plae I assume it is a plane like any other but I can't sketch on it nor can i attach nother plane to it?
View 9 Replies View RelatedWhenever I open a part (or iam), the ground plane and ambient shadows are active. If I turn them off (on View tab, appearance panel) and exit the part, then reopen it again, the ground plane and ambient shadows are active again.
How do I save these appearance settings? Do I have to turn these off EVERYTIME I open a part?
I didnt see anything in the app options for this.
I'm doing drawings of a construction site. Traditionally, in AutoCAD drawings, we show a solid line to represent the ground plane in elevation views. I'd like to do the same thing in my Inventor drawings.
I can "include" the XZ Plane in the view, which shows the line I'm wanting, but it shows as a phantom line.
Right-clicking either the line in the drawing or the plane in the browser only gives me the option to "Edit Center Mark Style..."
If I go to the Style Editor, Object Defaults, Work Plane, the object style is Center Mark (ANSI). If I click on that, the drop-down only gives me that one choice.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I am trying to use AutoCAD to render some small parts. I am used to using Inventor Studio, but AutoCad's rendering tools have taken some getting used. to. I have everything figured out, with the exception of the ground plane for shadows and/or reflections.
I originally wanted a ground plane for a shadow to be projected on. However, I had no luck with that, so I modeled a large box under the part. Using that, I am able to get a shadow, or reflection, BUT, the edges of the box are showing in the background. The easy fix is to make the box larger, however, I need the reflective surface and background to be white so that it can be printed on paper without seeing the rendered edges.
How can I set a ground plane, or model a plane, for shadows or reflections, AND made it true white so that the edges cannot be seen?
I have several elements that I need to align flat to the ground plane, but due to how i have created them, I am finding it very difficult. They are panels for a geodesic type structure and i want to lay them flat to 3d print them. I have tried adjusting pivot, aligning to object, etc but I cannot get the sections to be completey flat
For some reason Area will not let me post .max file so it's a dxf instead
Possible to have more than 1 derived part in a part.
And is it possible to select on which plane and location the derived part is to be?
I have a part with a derived part but now I want to add another part to it. is this possible?
I am trying to show the plane as you can see in this image I found online. My screen does not show this. I have selected View>Show>3D Ground Plane but that does not work.?
View 2 Replies View Relatedin cs6 extended, how would i hide the ground plane.
View 4 Replies View RelatedIs there any way to dimension my features, whether it's a sketch or using the hole feature, to either the middle of my part or to a middle plane I have?
I am wanting a group of tapped holes to be the same from the middle of my part, regardless of what the overall size of the part is. How can I dimension like this?
I was pretty much expecting to see a Ground Plane object in the scene explorer, but no such beast exists. My spirits were briefly lifted by finding a Ground Plane section in the Environments palette, but that does not allow you to attach texture maps to the ground plane, only a solid color.
If such a thing doesn't exist (for shame, Adobe), any quickest way to create a textured, infinite ground plane (imagine, for example, a tiled floor or a wooden floor that extends all the way off into the horizon)?
In Revit 2012, how do I place a wall at an angle to the ground plane, so it can be connected to a roof above? I have tried placing a wall on level and rotating it, however it does not appear to work. I can rotate other elements, but not walls.
View 1 Replies View RelatedWorking on setting up 2013 for our department. By default we use the application option - Part Tab - of creating a sketch on the x-z plane upon new part creation. Now this actually works, problem is you can't draw on it, or you can't see what you are drawing. If you exit out of the sketch and start a new one then it works. I have found that if you switch the setting to the y-z plane is does the same thing. Switching it to no new sketch or the x-y plane and it works fine. Tying to determine if it's actually a bug in inventor or if it's just something with what I am doing or our template files.
View 5 Replies View Relatedthere is a command or simple procedure to actively view a section plane in an assembly or part. I know there are the static methods of using slice graphics and section view however I'm looking to create a live section where I am able to constantly move the plane through the model thus altering the live section as it appears on screen, similar to the way a model can be viewed in Tekla with the cut section command.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'm trying to reposition dimensions in a drawing through the API. The output of my code seems to indicate the method is working, but after it runs the drawing is unchanged. Here's the code (in VBA):
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Set oSheet = oDoc.Sheets.Item(1)
Dim oLdim As LinearGeneralDimension
Dim oLeaderNote As LeaderNote
Dim oDimLine As LineSegment2d ' Dimension Line
Dim oStartPt As Point2d ' Dimension Line Start Point
Dim oEndPt As Point2d ' Dimension Line End Point
[code]....
Looks like it moved my vertical dimension left, but it doesn't actually do anything. Is this not a viable method for repositioning a dimension?
When I do a section in a drawing, i always have to replace the letter a end of arrow.
Is there a way so the letters will always be at end of arrow?
How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI'd like to have a menu option next to "Grounded" which is "Grounded to origin", to save setting three flush constraints every time I pull a part into an assembly and want it to have the same origin as the assembly. This is something I do quite a lot using the multibody part > derived part > assembly workflow. Apart from saving time it would save cluttering up the model browser. In the meantime is there a scripting method of doing this with one click? IV2013
View 5 Replies View RelatedI seem to have made what many might consider a rookie mistake. Built a fairly complex structure for an overhead crane system and get to the end to find that I missed two holes. The problem with these two holes is it is ONLY 1 plate (my grounded part), but I have used this same part in one other instance. So if I edit (even from within assembly) and add the two holes to the grounded plate it creates them in the other plate, which I dont want.
Since I have the second plate being used as a refence to locate MANY other parts on this unit, it would be quite difficult to replace it with a new part (same but different file name).
Any way to add said two holes to the grounded plate only and not the other?
Inventor 2014 PDS
I'm trying to have some advanced positioning - I don't know if this can be done using dynamic blocks. Start with some basic geometry - let's say a triangle - /. Now, I can add a rotate parameter & action that will let me spin that as I wish.
Next - add a couple attributes. I have a pair of attributes, separated by a text, aligned as "A1.A2" A1 is right-justified, and A2 is left-justified, so when edited they remain in the form "A1.A2" regardless of length. I can now add a point parameter, combined with a move action, that will let me reposition these three entities freely.
My question - can I have the rotate action trigger a move, such that the text repositions to a defined location without changing orientation (DON'T rotate the text!)?
So if I start with (leading . used for positioning in this forum text box):. A1.A2
I want to rotate it to: A1.A2
While I'd love to have it totally self-adjust, I mainly need it to handle 45-degree increments of rotation.Is there a way of expressing this using dynamic blocks using action and/or constraints? Or would this require a lisp construct?
how to align an object 90 degrees relative to the ground.Also how can draw a 350x350mm rectangle without using the dimension tool to check the size of the rectangle every time I resize it?
View 3 Replies View RelatedWhen I add an image to my sketch the main body then appears "of the ground" as you van see from the attached screen shot. The shadow and reflection is distant. The minute I remove the instead image the object and the shadow touch again as it should be.
View 1 Replies View Related I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedThe part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View Relatedconvert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies View Related