AutoCAD Inventor :: Add Sketch On Part's Face By Vba
Oct 22, 2012I can add sketch on a part's workplane (xy, xz, yz) by using sketchs.add.is there anyway i can select a face of part and create a new sketch?
View 6 Replies
ADVERTISEMENT
AutoCAD Inventor :: Visible Sketch Dimensions On Face Of Part?
Jan 8, 2013I'm making a part and am adding features to it and using my existing sketch dimensions as my guide. The problem is that when there are sketch dimensions on the face of the part, they are difficult to read. I'm forever dragging these dims to the side in order to read them, it's just a bit annoying. I was wonering if there was a setting that made them show up as well as they do when the aren't sitting on the face of my parts. I've attached a .jpg of what I'm talking about. notice the dimension on the left side and the bottom.
View 2 Replies View RelatedAutoCAD Inventor :: Add Sketch To Part Using Face Referenced From Assembly
Jan 24, 2012what im trying to do is select a face in an assembly and create a sketch on it in the part level
this is just one step in the program im trying to make the overall program will create a tube frame and the tubes will be driven from a base solid
Sub test1()
Dim asmDoc As AssemblyDocument
Set asmDoc = ThisApplication.ActiveDocument
Dim asmDef As AssemblyComponentDefinition
Set asmDef = asmDoc.ComponentDefinition
[code]......
AutoCAD Inventor :: Copy Part Sketch Into Drawing Sketch
Sep 20, 2012How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
AutoCAD Inventor :: Derive Part From Face On Another Part?
Apr 3, 2012I am trying to derive a part in an assembly from an existing part so that when the first part's geometry is altered the second part will update accordingly. I have tried to use the derive tool but I only need the bottom geometry of the part to derive a base plate part from and I see no way to select just that face when using the derive tool.
View 3 Replies View RelatedAutoCAD Inventor :: Project Sketch From Part To Another Part In Assembly?
Feb 7, 2013I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
AutoCAD Inventor :: Splitting Face Into Multiple Ones From One Sketch?
Apr 2, 2012What I'm doing is preparing a model for FEA, and I want to split some faces for where the nuts meet a surface. So far I've only been able to do this by repeatedly making a sketch and then splitting around each hole. Is it possible to do several splits from one drawing or to pattern the split? (I've attempted both, but failed hard).
Splitting a surface 5 times is slow, but essentially fine. Doing it this way when I have more bolt holes though is a chore.
AutoCAD Inventor :: Can't Get Face To Loft Properly To Sketch
Jul 18, 2012I am having to model a spiral slide in sections, and the top piece has this weird angled lip where the opening distorts. Im simply trying to take the face of the extruded part (in three sections) and loft it to the sketch on a different plane. And use the sketched curve as the centerline.
View 5 Replies View RelatedAutoCAD Inventor :: Create Sketch On Face For Extrusion?
Jul 25, 2008I am trying to create a sketch on a face for an extrusion. The sketch has a text box. I am having trouble excluding the text in a sketch otherwise all the closed geometries of the text get extruded.
I created an objectCollection and excluded the TextBox objects. Still not working.
AutoCAD Inventor :: Fillet Part Of A Face Edge?
Sep 20, 2011I need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
AutoCAD Inventor :: Add WorkPoint Where Axis And Part Face Intersect?
Aug 23, 2013Using API is there a way to add a WorkPoint where an Axis and a Part Face Intersect?
I need this to be able to create a WorkPlane normal to the surface of the part at that location.
AutoCAD Inventor :: Drawing View Aligned To Part Face
Nov 7, 2013I frequently use the "Make Components" feature in order to derive assembly parts from solid bodies in a single master part file. Then I can quickly align the parts in the assembly with the "Ground and Root Component" utility. However, when the part is placed at an angle, the derived part becomes misaligned in the viewports of my idw files after the part gets rotated to a new angle. Then I have to manually reset the rotation by editing each viewport and selecting "View Face." If the angle has changed only slightly, sometimes I won't notice the difference, and I'll forget to re-align my viewports. Is there some way to automatically keep a viewport aligned with an specific face on a part?
If that's not possible, I guess the simplest method would be to place each part into its own assembly and constrain it to the global UCS, but I don't want to have to do that for every angled part in my assembly.
I also considered drawing only sketch blocks in my master file for the angled components, and deriving the sketch blocks to create parts that are properly aligned with the origin planes in their respective ipt files, but with that method I'd end up with a more complex master file with lots of exported parameters and extra working geometry, and I'd have to constrain these parts manually instead of using "Ground and Root Component."
-Using Autodesk Inventor Professional 2012
AutoCAD Inventor :: CAM Follower In A Part Sketch?
Jul 27, 2012I have a feature that is very similar to a CAM that I need to cut other feature with. The second feature needs to maintain its position way from the CAM feature just as a CAM follower would. The CAM is made up of arcs. If it were made from a spline I would be all set. Is there a way to either convert the arcs to a spline or make a CAM follower type arrangement in a part sketch?
View 1 Replies View RelatedAutoCAD Inventor :: Constraining A 3D Sketch To A Part
Dec 13, 2011I am trying to make a 3D sketch that is constrained to two different parts in an assembly. I want the sketch to be constrained to each of these parts so that if you move the parts relative to each other the sketch will adapt.
I have tried using work planes and project geometry but when I go to move the part the geometry won't always follow the part. I am using a spline for the 3D sketch so it should be able to adapt when the parts are moved but the problem is constraining it to something that follows the part.
AutoCAD Inventor :: Part Sketch Not Showing In Assembly?
Oct 15, 2013I am using Inventor 2014. I have a sketch on a part that does not show up when I put the part into an assembly. Any way to make the sketch show up in the assembly? It is a 3d sketch that is projected to a surface.
View 1 Replies View RelatedAutoCAD Inventor :: Red Lines Is Part Sketch Mode?
Dec 12, 2002I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedAutoCAD Inventor :: Sketch Visibility Of Part In Assembly Using Vba
Dec 11, 2013how to turn off the visibility of a specific sketch (ex. base_Sketch) of a certain part in assembly using vba?
View 3 Replies View RelatedAutoCAD Inventor :: Can't Reuse Sketch In Adaptive Part
Mar 15, 2013I have an adaptive part which I created within an assembly. I created work planes in this file, based on features in the assembly, and created a sketch on one of these work planes. I used this sketch for an extrusion. then I wanted to reuse the sketch again for another extrusion - normally one needs to select 'Share sketch' from the right-click menu of the sketch, but this is not available. I have already experienced this (random) behaviour, i.e. the 'Share sketch' option missing from the menu. In those case it was ok to make the sketch visible, and then I could use it again. But now it doesn't work. I made it visible, but when I click Extrusion, Inventor wants me to create a sketch, claiming there is no usable sketch.
Inventor 2013
AutoCAD Inventor :: Project Sketch Onto Part To Remove 2mm Of Shape
Dec 7, 2013is there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
AutoCAD Inventor :: 2012 - How To Move Part Of Sketch Along Z Axis
Jul 12, 2013In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies View RelatedAutoCAD Inventor :: Adding Sketch To Sheet Metal Part
Oct 12, 2011I am having trouble adding a sketch which is on a dwg file to my sheet metal part. First I created a flat plate sheet metal part.
I also have a sketch on a dwg file that I am trying to transfer to the surface of the sheet metal plate. I initiated a sketch on
the sheet metal part thinking I couls open the sketch on the dwg part and do a copy and paste. That did not work.
Second I tried to insert the dwg file but when I search for the dwg file under the insert function, there are no dwg files shown.
AutoCAD Inventor :: Unable To Extrude Close Sketch Through Part?
Mar 15, 2013why I am not able to extrude the close sketch through the part.
View 1 Replies View RelatedAutoCAD Inventor :: Sketch Panel Don't Open When Creating New Part
Apr 18, 2012I have a problem when I`m creating a new part in assembly.
I`m in assembly and I push a create button. Then I give it a name and OK. Then I push a plane where I want to make the part. New sketch comes but no sketch panel. I have to push right button from mouse and click finish sketch. Then when I go edit sketch the sketch panel comes like it suppose it to be.
AutoCAD Inventor :: Sort Sketch Blocks In A Part File?
Sep 17, 2012Is there any method to sort sketch blocks in a part file? All of our sketch blocks are numbered with a profile number. When we create a new multi-body assembly we will often derive 50-100 of them into the master file. It would be great if we could sort them by profile number.
The next best solution would be the ability to create sub-folders to place them in by type (sort of like assembly folders), but I'm pretty sure this isn't possible.
AutoCAD Inventor :: Display Model Sketch In Part Drawing
Mar 20, 2013How can I display a sketch or projected geometry that is not a closed loop in a ipt drawing? Historically I have to use a closed loop and emboss in order to display the geometry in a drawing.
Then move that forward to a DXF file for its intended use. I think there should be a way to just have lines placed on the model and display it on a drawing without it having to be a feature.
AutoCAD Inventor :: ILogic Part Snap To Sketch For Walkways?
Apr 25, 2013The company I'm working for is moving toward standardising all plant designs. iLogic appears to be the best way for rapidly producing assemblies that keep to a standard.
My new task is to automate the adding of walkways (including hand rails) to large plants. My idea is that walkways would be added to the plant similar to how frame generator works. The draftsman would draw a sketch on a plane around the structure. He would then run a form (That looks like the frame generator form).He would select the lines, a rule would capture the length of that line, pattern the standard walkway along the line until the line intersection, add a corner walkway, and then pattern the straight walkways again.
1) I do not know the ilogic code in order to 'get' a length from the lines that the user selects.
2) how does one constrain the center line of a part to a sketch line.
The second idea I had to create the walkway is (without a sketch), was to have a form that has a dropdown list of all the standard walkway pieces. The form would work almost like adding a bolted connection to an assembly (e.g. bolt, washer, nut, washer, nut). The draftsman would for instance, choose an straight 800mm part, a 1200mm part, a corner(left), a 1200mm part. Each walkway assembly piece, would then be added to the main assembly in the correct order and constrained. BTW, is there any book with all the inventor iLogic code, function and uses? I have found myself pouring though so many forums and picking up bits and pieces, but no actual instruction.
AutoCAD Inventor :: Hide Part Sketch Construction Lines?
May 16, 2011Is there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.
AutoCAD Inventor :: How To Use Existing Sketch While Making New Part (model)
Aug 12, 2013I have made a part - a motor that has four holes.
Now I'm trying to make another part, which will be aluminium plate that needs to have holes in exactly same points as the motor. My assembly containts both that parts.
What I'm trying to do is to reference in sketch a point that comes from different part (motor).
I could do it by hand, make it look that the holes are on top of each other but then there will be an error which doesn't seem professional.
In some tutorial on yt I have only found that using points one can reference the holes more easily, but it didn't show how.
AutoCAD Inventor :: Possible To Constrain Text Height In Part Sketch?
Jan 10, 2012When I add a text to a sketch, I can constrain the rectangle to set its size, orientation and position.And I can set the text width to fit into the rectangle. But I wasn't able to set the text height to fit into the rectangle.
Am I missing something or is the fit text option doing only half the job?
AutoCAD Inventor :: New Part Default Sketch On Y-z Plane Can't Draw
Aug 13, 2012Working on setting up 2013 for our department. By default we use the application option - Part Tab - of creating a sketch on the x-z plane upon new part creation. Now this actually works, problem is you can't draw on it, or you can't see what you are drawing. If you exit out of the sketch and start a new one then it works. I have found that if you switch the setting to the y-z plane is does the same thing. Switching it to no new sketch or the x-y plane and it works fine. Tying to determine if it's actually a bug in inventor or if it's just something with what I am doing or our template files.
View 5 Replies View RelatedAutoCAD Inventor :: How To Click On Two Lines In A Part Sketch And Get There Intersection Point Using VBA
Oct 29, 2013In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies View Related