AutoCAD Inventor :: Hide Dimensions In Sketch Mode In Drawing Environment
Sep 28, 2012
I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
ADVERTISEMENT
Oct 29, 2013
I'd like to add a sketch to my drawing - a sketch that is independent of any other views. Is it possible to make this sketch have a scale associated with it instead of being 1:1?
Right now I am just overriding all of my dimensions.
View 1 Replies
View Related
Sep 9, 2003
In 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies
View Related
Mar 12, 2012
Where is the setting to control the size of dims in the IPT sketch environment. The arrow sizes are OK, but the dims are so small they are unreadable to the point of having to double click on the dim to get the actual value.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 2 Replies
View Related
Aug 7, 2012
Unfortunately, it's chock full of proprietary customer data, so I can't share the parts or the assembly. But I can pretty well explain what needs to happen, and I've attached a JPG that shows a bit of what I'm doing.
I need to design a bracket to hold an RPM sensor at a certain gap to a spiral bevel gear. I've got a huge assembly model (non-Inventor) from the customer, as well as the model for the sensor. My plan is to start a master IAM, insert the customer assembly, insert the sensor and constrain him, and draw the various hardware I need around the sensor.
So I start by making a work plane that matches the bevel angle and is in a location so the end of my sensor will be flush to that plane. Create a sketch on that plane, then project 2 relevant axes to create the appropriate "origin" from which my location will be based. Place a point on one line, at a certain radial distance and constrain my point.
So now I've got a point and a plane that are where I want my sensing face and my centerline axis to be. What now? I was thinking that I'd create a work axis "normal to plane through a point", but this workflow isn't available in the assembly environment. I can't constrain a solid to a sketch point, so I really don't know what to do at this point in order to put the part where I need it.
View 2 Replies
View Related
Mar 26, 2012
How can I do this? A reference dimension was created by a circular pattern and it covers a circle I'm try to select.
View 2 Replies
View Related
Aug 20, 2012
I'm working with a series of 3D sketches. Some sketches must remain visible as reference. While creating the sketches, the dimension call-outs grow too distracting from the linear sketches. Is it possible to hide, or toggle off/on the dimensions while leaving the sketch geometry visible?
View 3 Replies
View Related
Mar 6, 2013
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
View 1 Replies
View Related
May 16, 2011
Is there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.
View 9 Replies
View Related
Jan 11, 2014
I´m drawing a component which does not fit within the drawing sheet. How can I reduce its space on the sheet, while keeping the dimension equal?? I know I can use a Break, but I really can't suceed into using it.
View 9 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Apr 24, 2012
In the Inventor 2012 drawing environment when multiple objects were present I would pause the curser and use the wheel on the mouse to select the object and click the green check mark to dimension a part.
In Inventor 2013 the objects will scroll using the wheel but the green check mark don't show up. How can I select the correct object I want to dimension to?Has the behavior of the select other function changed in Invnetor 2013 or is this a bug?
I'm dimensioning to a mid point of a line that has a center line over it.
View 2 Replies
View Related
Nov 3, 2011
I want to add new properties so I can have new, custom rows when I go to Fields text in a drawing environment?
I can see how you add Prompted Entry ans so. Cant add anything to basic properties.
View 4 Replies
View Related
Jun 6, 2012
How do I change one of the dimensions in my sketch to be metric while maintaining the rest as a standard dimensions?
See attached pic.
View 9 Replies
View Related
Dec 17, 2012
One of our senior designers seems to think there is a setting when creating a sketch that will automatically dimension.
So if a straight line is draw and 5 mm length is entered a 5 mm line will immedialtey be created, he seems to think that you can then immedialtey Dimension said line??
I can't find anything, settings wise?
View 3 Replies
View Related
Jul 30, 2010
I need to create skech symbols to illustrate mounting schemes, so without scale. I need to put dimensions in the symbol, which are only annotation, not parametric. This dimension must be visible once the symbol inserted on the sheet.
When I create the dimension in the sketch, it is always a paramertric dimension, which drve the drawing and is not visible in the inserted symbol.. How can I do to have only an annotation ? (I precise the option "sketch only" does not function on dimensions)
View 2 Replies
View Related
Oct 29, 2012
I would like to use Workplanes a little more in my model, as I am having problems with sketches failing when the model is changed slightly. I guess this comes down to the way the original parts have been modeled - dimensions for features taken off other features, which are not necessarily constant.
I have found it possible to project the workplane on the sketch, although this does not constrain the projected plane, it is free to move around.
View 2 Replies
View Related
Sep 21, 2011
I typically have a part file with bunch of sketch blocks as die drawings.I use those for rest of my workflow.
If I want to make drawings of these sections.
Is there a way by which I can retieve all dimensions from the sketch of the sketch blocks (die) on to a drawing.
I know that I can get model sketches but I do not know a way to get the model sketch dimensions.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 1 Replies
View Related
Nov 21, 2011
Likely a simple question; I have completed a part and because I am new, drew it a certain way to make my life easier. Now that the part is complete I would like to rotate the entire part (but not create a new solid) by 45 deg.
Inventor 2014 PDS
View 9 Replies
View Related
Jan 11, 2014
Is it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies
View Related
Jan 27, 2012
Autodesk for Inventor 2013, the ability to save while in sketch mode - if you're going to be spending a lot of design time sketching then this needs to be addressed so that the drawing is automatically saved. Otherwise if Inventor crashes (which it often does) while you're busy sketching away you loose your work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Jun 27, 2013
Since day 1 when I place a dimension in sketch mode, it immediately goes to edit so I can type the number in. Suddenly yesterday it stopped editing and I have to click a few more times to type the number in. It's totally messing up my work flow and whatnot. The option in application options is checked as well.
View 4 Replies
View Related
May 31, 2012
A few times a day my sketch fonts (for dimensions) go restarted. The cure is a reboot, but it only lasts a few hours.
View 9 Replies
View Related
Nov 28, 2011
All of a sudden, things in my inventor sketches are approximately double normal size - the UCS symbol, dimensions, constraint symbols. The UCS icon stays oversize regardless of the environment.
I went into Application Options, Sketch tab, and changed the Constraint and DOF symbol scale but it has no effect in the sketch environment. It's not confined to a single part or assembly and I have not, to my knowledge, changed any Windows or other Inventor setting.
I feel like I've stumbled into the Readers Digest Large Print edition of Inventor. How to control the size of these things?
View 2 Replies
View Related
Nov 20, 2013
How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies
View Related
Dec 28, 2012
Is it possible to use the ""Centerline Bisector" command in the sketch enviroment. I want to add a centerline of a hole on a sketch on my part, but I only want to select two lines and have the centerline generated.
View 3 Replies
View Related
Dec 12, 2002
I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies
View Related
Jun 17, 2013
How does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 Replies
View Related
Jul 23, 2012
(in Inventor) sometimes I am beset with a problem that I want to edit my sketch but sketch members like line(s),circle(s) are moving to dimensions which I don't want. The sketch is moving. How can I overcome this problem,
View 9 Replies
View Related
Jan 8, 2013
I'm making a part and am adding features to it and using my existing sketch dimensions as my guide. The problem is that when there are sketch dimensions on the face of the part, they are difficult to read. I'm forever dragging these dims to the side in order to read them, it's just a bit annoying. I was wonering if there was a setting that made them show up as well as they do when the aren't sitting on the face of my parts. I've attached a .jpg of what I'm talking about. notice the dimension on the left side and the bottom.
View 2 Replies
View Related
Oct 19, 2011
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
View 2 Replies
View Related
