How does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 RepliesHow do I change the dimension size in sketch mode?
View 4 Replies View RelatedThis is the second time this has happened... While putting in the dimension on the rectangle, The dimension just doesn't appear!
But it can be changed. When this happens I just delete and reopen another part.
Why is this, and, can this be changed?
Likely a simple question; I have completed a part and because I am new, drew it a certain way to make my life easier. Now that the part is complete I would like to rotate the entire part (but not create a new solid) by 45 deg.
Inventor 2014 PDS
Is it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies View RelatedAutodesk for Inventor 2013, the ability to save while in sketch mode - if you're going to be spending a lot of design time sketching then this needs to be addressed so that the drawing is automatically saved. Otherwise if Inventor crashes (which it often does) while you're busy sketching away you loose your work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I want to creat a driven dimension that I can use as a reference dimension in another part. Is there an easy way to do this without creating a new sketch, going into a previous sketch, making a long function based on other dimensions, etc.? For instance, just like the measure tool, but it stores the measurement.
View 4 Replies View RelatedHow do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies View RelatedIs it possible to use the ""Centerline Bisector" command in the sketch enviroment. I want to add a centerline of a hole on a sketch on my part, but I only want to select two lines and have the centerline generated.
View 3 Replies View RelatedI know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedIs there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies View RelatedHow can I do this? A reference dimension was created by a circular pattern and it covers a circle I'm try to select.
View 2 Replies View RelatedSeen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
In 2012 when in a sketch in an assembly all the stuff under "Format" is grayed out.
You cannot make a dimension driven, nor can you make a line construction or a centerline and you can't change a sketch point into a center point. Do I have some setting wrong?
I have a part.I use some Parameters of this part as linked to other parts.Once I change any parameter used as linked the other parts will follow it automatically.So I have drive and driven parts.
Now for some reason I need to change some geometry in my drive part in the way my drive dimension must be reattached to other geometry points.
I cannot delete and create the new dimension even with the same name since all my driven parts will lose this linked parameter in either way and this parameter becomes static (Reference Parameter).
I wish I can preserve the existing dimension (parameter) and reattach it to other geometry.
I am trying to apply dimension constraint for circle to add the radius dimension.
I have given the dimension location text point as input, but it doesn't take input location point to place the dimension and places the dimension at the center of circle. Please see the attached snap "CircleWithRadius.png".
Here is the sample
//===============================
CComPtr<Point2d> point2D;
TransientGeometry::CreatePoint2d(5, 5, &point2D);
CComPtr<SketchPoint> sketchPoint = SketchPoints::MethodAdd(point2D, FALSE);
CComPtr<SketchCircle> sketchCircle = SketchCircles::MethodAddByCenterRadius(sketchPoint, 3);
[Code] ........
Why the circle entity always place the radius at the center of circle?
I have created a SketchLine entity and trying to add aligned dimension by calling DimensionConstraints::AddTwoPointDistance(). It adds the dimension with inside arrowhead (see attached CurrentWorking.jpg), however, it would be nice if the dimension is added with outside arrowhead (see attached Expected.jpg).
if there is any API to toggle the dimension arrowhead accordingly.
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
In 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View RelatedI wonder if one can use drive constraint in sketch mode for blocks as I like to visualise how the links move when one dimension changes.
View 4 Replies View RelatedI am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedSometimes when I'm exiting from a sketch, the entire model goes back to isometric view. Is there a way to STOP this from happening?
View 9 Replies View RelatedSometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedI'd like to be able to vastly increase the size of the triad in the 3D Sketch environment - when sketching the triad is tiny and does not increase in size when zooming, this makes snapping to its planes extremely difficult.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
This is the first I've noticed this, but a sketch in an assembly does not allow to show the dimensions as an expression? In a .ipt sketch you can right click and the pop-up menu has an option to show the dimensions in different forms. I do not get this in an assembly sketch.
I do not know if this is me or not. It's just curious that it does not do that.
I need to disable the "Set sketch scale by the first dimension" feature.
The feature is nice under normal circumstances, but in my case i need to insert a dxf sketch and then draw around it in inventor. When i start to dimensioning the sketch then it scales the inserted part.
That aint so good.
How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedWouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I use 3D sketching frequently as a means to generate frames with the frame generator.
I notice that the constrain group no longer contains an equal length tool, as in a simple 2D sketch. This is where i would generally select two lines, and constrain them to be equal in length.
Is there a reason for this omission? Should I be worried that my menus are not showing the full options for constraints?