This is the first I've noticed this, but a sketch in an assembly does not allow to show the dimensions as an expression? In a .ipt sketch you can right click and the pop-up menu has an option to show the dimensions in different forms. I do not get this in an assembly sketch.
I do not know if this is me or not. It's just curious that it does not do that.
Unable to find a way to show dual dimensions in my model shetch.
View 8 Replies View RelatedThis is the second time this has happened... While putting in the dimension on the rectangle, The dimension just doesn't appear!
But it can be changed. When this happens I just delete and reopen another part.
Why is this, and, can this be changed?
I want to creat a driven dimension that I can use as a reference dimension in another part. Is there an easy way to do this without creating a new sketch, going into a previous sketch, making a long function based on other dimensions, etc.? For instance, just like the measure tool, but it stores the measurement.
View 4 Replies View RelatedIs there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies View RelatedHow can I do this? A reference dimension was created by a circular pattern and it covers a circle I'm try to select.
View 2 Replies View RelatedSeen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
In 2012 when in a sketch in an assembly all the stuff under "Format" is grayed out.
You cannot make a dimension driven, nor can you make a line construction or a centerline and you can't change a sketch point into a center point. Do I have some setting wrong?
I have a part.I use some Parameters of this part as linked to other parts.Once I change any parameter used as linked the other parts will follow it automatically.So I have drive and driven parts.
Now for some reason I need to change some geometry in my drive part in the way my drive dimension must be reattached to other geometry points.
I cannot delete and create the new dimension even with the same name since all my driven parts will lose this linked parameter in either way and this parameter becomes static (Reference Parameter).
I wish I can preserve the existing dimension (parameter) and reattach it to other geometry.
I am trying to apply dimension constraint for circle to add the radius dimension.
I have given the dimension location text point as input, but it doesn't take input location point to place the dimension and places the dimension at the center of circle. Please see the attached snap "CircleWithRadius.png".
Here is the sample
//===============================
CComPtr<Point2d> point2D;
TransientGeometry::CreatePoint2d(5, 5, &point2D);
CComPtr<SketchPoint> sketchPoint = SketchPoints::MethodAdd(point2D, FALSE);
CComPtr<SketchCircle> sketchCircle = SketchCircles::MethodAddByCenterRadius(sketchPoint, 3);
[Code] ........
Why the circle entity always place the radius at the center of circle?
I have created a SketchLine entity and trying to add aligned dimension by calling DimensionConstraints::AddTwoPointDistance(). It adds the dimension with inside arrowhead (see attached CurrentWorking.jpg), however, it would be nice if the dimension is added with outside arrowhead (see attached Expected.jpg).
if there is any API to toggle the dimension arrowhead accordingly.
How does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 Replies View RelatedI am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
I need to disable the "Set sketch scale by the first dimension" feature.
The feature is nice under normal circumstances, but in my case i need to insert a dxf sketch and then draw around it in inventor. When i start to dimensioning the sketch then it scales the inserted part.
That aint so good.
How do I change the dimension size in sketch mode?
View 4 Replies View RelatedOctagon inside a circle... The circle cannot be dimensioned off the octagon?
I need it to have, say .25" clearance and I mean I can just make the circle the right size... but Inventor/I really should be able to do something this simple...
A circle inside a circle, same center point, you can click both and get the distance between the two?
(R-click and set circle to Radius does nothing, it still wants to dimension it from the center point)
I have a VB program that auto updates the size of a door and frame assembly, and in turn, updates the shop drawings to reflect this change. I have a view on my shop drawing that I have drawn a sketch in. I start the sketch, add my dimensions, and I use 'Project Geometry' to project the edges of the actual part around the sketch to constrain my sketch and keep it in place. The problem is, as the program runs, and the door/frame changes height, the sketch loses it's dimensional references to the projected geometry. When I go back and reopen the drawing after running the program, all the dimensions that went to the projected geometry are gone.
Is there another way to anchor a sketch to a drawing view part instead of dimensioning to projected geometries? This doesn't seem to be working, and I've tried it every which way I can think of. Oddly enough, I have another sketch in a different view that is set up the same way, and it never misses a beat.
Why the heck does Inventor arbitrarily orient sketches as it sees fit? I often create my first sketch on the right (YZ) plane and Inventor, stupidly turns the sketch where "RIGHT" in the viewcube reads from top to bottom.
I know all the things to do to AFTER this happens, but it shouldn't happen in the first place. If I turn my sketch so that up is up, like it should be, I then have to remember that vertical is horizontal, which is now vertical. I can't change the sketch coordinate system. It's the first sketch and there is nothing to align it to.
How to prevent the above example from occurring in the first place.
This, and the fact that I can't dimension to any existing vertices or edges without projecting them first, really make me hate using Inventor sometimes. To me, these are huge problems, neither of which Solidworks has. At worst, both of these behaviors should be configurable.
Why is dimension visibility grayed out in the sketch context menu shown in the attached image?
View 3 Replies View RelatedI would like to show such a dimension, like S1 in attachment. It is really value of tolerance of nominal 0 dimension.
View 2 Replies View RelatedThis page mentions the degrees of freedom glyphs, but it doesn't say how to show them, and I couldn't find any ribbon button or context menu item that mentions them.
View 2 Replies View RelatedI want to be able to use the same dimension parameter as a previous component pattern to create a new component pattern. Is there a way to be able to do this? On features, you can use the Show Dimension and then select the dimension you want. With rectangular patterns I don't see a way to do this and there is no way to even note which parameter it gave it as it is being created. I guess I could name the parameter on the fly and then use that same name, but was wondering if there was a different way.
View 2 Replies View RelatedI have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies View RelatedSometimes after I have created a sketch I can not extrude it, sometimes it wont let me click on the profile, other times it will only let me cut away material not add it like I would like. I am sure it has something to do with something fundamental I am doing wrong within the sketch, but I am not sure what.
View 9 Replies View RelatedThis is a problem I've had on 7 pc's:
All of the pc's are I7's 8gig Windows 7
The problem is, while making a sketch and trying to hatch it, it's locks up the system. Completely using up all of the resources to the point I have to unplug the pc/hot boot it.
This has been happening on both Inventor 2012 and 2011. (doesn't matter which version of Inventor .. Suite/Prof, Ultimate etc)
I'm thinking it has to be a Windows update that is messing it up, as it worked in the past.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
I have this dwg that i've imported into a part sketch. All except one layer won't come it. So i have made a dwg with only the culprit layer, see attached. Why nothing gets imported into a inventor 2012 sketch.
BTW all layer from my main dwg file gets imported into on single layer even tho i'm not using the option to do that. It is not a big deal compared to that layer not being imported.
try to import it and let me know if it works, my autocad and inventor are patched SP1
is there any way I can place dimension on drawing that would be in dual units (in decimal degrees and in deg min sec)?
I did not find this possible so far.
I made a sketch. In order to make a hole in the middle of the "triangle", I had to create a tangent circle based on the triangle edges. And then make a new circle (to be the hole I need) and constrain it to the first tangent circle.
This way, if I change the size of the triangle, the hole I need (the inner one) will always stay in the middle of the triangle.
Anyway, when I try to extrude the different profiles of my sketch, something strange happens. As soon as I select the middle circle (not the inner one), 2 of the side outbreak's lose their extrusion.
Second question I have is why did my sketch (except for 2 blue lines) turn from blue to green after fixing loop problems?
(Screenshot’s and sketch file are included.)
I have three sketches. Two are 2D sketches and the third is a 3D sketch created by the intersection of two surfaces created from the previous two 2D sketches. The order of the browser is as follows:
Sketch1
Sketch2
Revolution (surface)
Extrusion (surface)
3D Sketch 1
When I go back to edit Sketch 2, Sketch 1 is always showing...regardless of whether or not I turn on/off visibility. The visibility toggle has no effect. Sketch 2 has no projected geometry from Sketch 1.
I have draw in DWG the front view of a ship's frame. I've closed the loop in inventor and extruded the object but I am unable to sketch on most of the surface to complete the side view..??
I can only sketch on one section the upper and lower sections it won't allow me too.
The top should be offset to the right but I am unable to draw the sketch onto the fame.
See attached image file. I can't select just the profile sketch to cut extrude. It only selects the whole face (surface). I have this issue on (2) different workstations and on various parts along the way.
View 2 Replies View Related