AutoCAD Inventor :: Unable To Turn On / Off Sketch Visibility
Jul 4, 2012
I have three sketches. Two are 2D sketches and the third is a 3D sketch created by the intersection of two surfaces created from the previous two 2D sketches. The order of the browser is as follows:
Sketch1
Sketch2
Revolution (surface)
Extrusion (surface)
3D Sketch 1
When I go back to edit Sketch 2, Sketch 1 is always showing...regardless of whether or not I turn on/off visibility. The visibility toggle has no effect. Sketch 2 has no projected geometry from Sketch 1.
I've managed to cobble this code together to turn some sketch visibilities on and off. However, what I'd really like to do is have a single sketch containing some blocks, and turn the visibility of the blocks on and off... How to call the blocks -
'Iterate through the sketches collection'Turn the edging indicators On And Off For Each oSketch In oDoc.ComponentDefinition.Sketches Select Case oSketch.NameCase "Front Edged"If E01 = True Then oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Top Edged"If E02 = True Then oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Back Edged"If E03 = True Then oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Base Edged"If E04 = True Then oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfEnd SelectNext
Since changing to Inventor I seem to be unable to turn off visibility of parts in assemblies on a drawing. Usually I just expand the view in the browser then right click on parts and turn off visibility. When I try this the visibility option is grey.
I sometimes edit parts in assemblies. When I turn sketch visibility on or off it does not stay the way I left it. I should be able to edit a part in part view or assembly and the view setting off or on should be how it was last saved. If I saved an ipt with the vision it should be on in any & all assemblies it lives in but its not. I have noticed the difference in new version 2012 - 2011 was no problem.
The attached part has multiple holes in multiple locations...... I want to show in the .idw one set "row" around the circumference at a time.
So I want to show set one, how far in from the end of the tube, then how many and at what degrees around the 360*. to do this i can only suppress the other features right now.
so when I make another View those same parts are suppressed and i cant change it around otherwise it messes with the holes I want and don't want to show in the previous view.
Somehow my top level assembly shows the UCS triads for hundreads of my parts (but not all of them). I know I didn't turn the visibility of all these UCS triads on manually. Now I cannot get them to turn off.
When I toggle the visibility status of a few and save the file they come back when the file is reopened.
Note, they are NOT visibile in their respective part files, just in my top level assembly.
I added another extrusion profile to my structural shapes library, using the same method as the others a few years ago. It works, but the new extrusion now shows up with its profile sketch, start and end planes, and driven dimension visible. The old stuff doesn't (like I would expect). I have all planes in the published part turned off, not marked for export, etc., just like in the old ones. How do I turn this off? Inventor 2012 SP2.
When I open the extrusion separately, the work features to not display. But, the it's also shown as the "default" color not as material. Why does it default to "default" not "as material" like everything else?
In Inventor dwgs when I turn the visibility of the harness assembly off (the icon turns gray) the harness still remains visible in the View on the dwg. My co-worker is having the same problem. This is happening on several different inventor dwgs where the harness is not visible (the visibility is turned off) but once an edit is made to the assembly (such as making a part visible) the harness becomes visible even the the visibility is turned off in that View. I don't know if this is related to the recent installation of service pack 4 for inventor 2010 as this problem recently began occurring.
It happens sometimes, when I try to turn off the visibility of a part in a created view, the option is grayed out, can't uncheck visibility. Whats the reason?
I'm doing a fairly big one-off for use at our factory so am going the multibody ipt route. I have a design view setup within the ipt with nearly all solids switched off but when working within a sketch this seems to be ignored. I want to make sure I am projecting from sketches not bodies so if I need to tweak things later and bodies change the model won't fail.
I.e. the bodies all become visible when working in a sketch where as before going into the sketch the bodies weren't showing.
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
At my company when producing drawings for manufacture we require a sheet for any steel profiles to be cut!..We do this by selecting the assembly from base view,hitting model view tab, selecting presentation and choosing the relevant profile from the drop down!
Once the profile is placed, we highlight the view and hit the parts list tab which obviously creates a parts list, but for the whole assembly, we then have to edit the parts list by turning off the visibility of the lines of all the parts which are not relevant!!...as you can imagine this is quite a laborious task if you have 50 different profiles.
The reason for this is to show the qty, steel grade and part number to the suppliers. My question is, any code that will take the lines of the parts list that are not relevant to the selected view and turn the visibility of those lines off?
It's 2012. I haven't found a setting in the dim style or the RMB options to turn off the extension line. I saw the posts showing drawing a sketch in the view but come on, all that to just turn off the line?
When I edit a part directly in an assembly, clicking on 'edit sketch' (frequently) changes the view from the one I had set while looking at the assembly. Is ther any way to turn this OFF?
ACA2011My dimensions seem to be fickle with regard to snaping. I've got my OSNAPs on, and I can't snap to a structural beam above, nor can I snap to a window sill. I can dim to the mid point of the window sill by using .x & .y filters, and can only snap to the axis line on a beam. Is there a toggle somewhere?
Sometimes after I have created a sketch I can not extrude it, sometimes it wont let me click on the profile, other times it will only let me cut away material not add it like I would like. I am sure it has something to do with something fundamental I am doing wrong within the sketch, but I am not sure what.
The problem is, while making a sketch and trying to hatch it, it's locks up the system. Completely using up all of the resources to the point I have to unplug the pc/hot boot it.
This has been happening on both Inventor 2012 and 2011. (doesn't matter which version of Inventor .. Suite/Prof, Ultimate etc)
I'm thinking it has to be a Windows update that is messing it up, as it worked in the past.
Work ~ Inventor Ultimate 2013 SP1.1 Win 7 64bit ~ i7 20gb Nvidia Quadro FX 1700
I have this dwg that i've imported into a part sketch. All except one layer won't come it. So i have made a dwg with only the culprit layer, see attached. Why nothing gets imported into a inventor 2012 sketch.
BTW all layer from my main dwg file gets imported into on single layer even tho i'm not using the option to do that. It is not a big deal compared to that layer not being imported.
try to import it and let me know if it works, my autocad and inventor are patched SP1
I made a sketch. In order to make a hole in the middle of the "triangle", I had to create a tangent circle based on the triangle edges. And then make a new circle (to be the hole I need) and constrain it to the first tangent circle.
This way, if I change the size of the triangle, the hole I need (the inner one) will always stay in the middle of the triangle.
Anyway, when I try to extrude the different profiles of my sketch, something strange happens. As soon as I select the middle circle (not the inner one), 2 of the side outbreak's lose their extrusion.
Second question I have is why did my sketch (except for 2 blue lines) turn from blue to green after fixing loop problems?
I have draw in DWG the front view of a ship's frame. I've closed the loop in inventor and extruded the object but I am unable to sketch on most of the surface to complete the side view..??
I can only sketch on one section the upper and lower sections it won't allow me too.
The top should be offset to the right but I am unable to draw the sketch onto the fame.
See attached image file. I can't select just the profile sketch to cut extrude. It only selects the whole face (surface). I have this issue on (2) different workstations and on various parts along the way.
