I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 RepliesHow to set the visibility of workplanes in an assembly file to false.?
View 3 Replies View Relatedwhen in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies View RelatedIs there a way to turn off visibility on work planes using ilogic? Also, is there a way to change an extrusion type from an assymetrical extrusion to a one direction extrusion using ilogic?
Inventor 2013 Certified Professional
I have a part file with work plane on it (visibility option is checked). When I put it on assembly file, the work plane is disappeared.The part file is on attachment.
View 3 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI added another extrusion profile to my structural shapes library, using the same method as the others a few years ago. It works, but the new extrusion now shows up with its profile sketch, start and end planes, and driven dimension visible. The old stuff doesn't (like I would expect). I have all planes in the published part turned off, not marked for export, etc., just like in the old ones. How do I turn this off? Inventor 2012 SP2.
When I open the extrusion separately, the work features to not display. But, the it's also shown as the "default" color not as material. Why does it default to "default" not "as material" like everything else?
I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
I have a part given to me from a customer that has ALL custom planes turned on. This file is large and has many assemblies, part, sub assy's.... too much to go thru one at a time. Can I turn all 'plane views' off at once? Why? Because I find it messy... no other reason.
View 3 Replies View RelatedThe attached part has multiple holes in multiple locations...... I want to show in the .idw one set "row" around the circumference at a time.
So I want to show set one, how far in from the end of the tube, then how many and at what degrees around the 360*. to do this i can only suppress the other features right now.
so when I make another View those same parts are suppressed and i cant change it around otherwise it messes with the holes I want and don't want to show in the previous view.
See attached screenshot.
Somehow my top level assembly shows the UCS triads for hundreads of my parts (but not all of them). I know I didn't turn the visibility of all these UCS triads on manually. Now I cannot get them to turn off.
When I toggle the visibility status of a few and save the file they come back when the file is reopened.
Note, they are NOT visibile in their respective part files, just in my top level assembly.
I use inventor 2013. Whenever I start a new sketch and select the top plane, the camera changes so I look at the top plane but also rotates 180degrees. I really hate that the camera rotates 180 degrees because it causes me to always see the drawing upside down (and then change the camera... every time...)
Is there a way to disallow inventor to cause this treason?
The API doesn't appear to provide the ability to turn visibility off on a custom table row. Is there anyway to turn off the visibility of a row?
Auto desk: do you have plans on adding this functionality to the API?
In Inventor dwgs when I turn the visibility of the harness assembly off (the icon turns gray) the harness still remains visible in the View on the dwg. My co-worker is having the same problem. This is happening on several different inventor dwgs where the harness is not visible (the visibility is turned off) but once an edit is made to the assembly (such as making a part visible) the harness becomes visible even the the visibility is turned off in that View. I don't know if this is related to the recent installation of service pack 4 for inventor 2010 as this problem recently began occurring.
View 2 Replies View RelatedIt happens sometimes, when I try to turn off the visibility of a part in a created view, the option is grayed out, can't uncheck visibility. Whats the reason?
View 4 Replies View RelatedAs we have layers in AutoCAD Product, I Started using different sketches and using them as layers by turning the visibility on and off.
Can we write a macro (button Click) to turn one perticular Sketch on and off???
For example If I had a Sketch named as GROUNDFLOOR, can I use a macro to turn them off and on when needed?
I have three sketches. Two are 2D sketches and the third is a 3D sketch created by the intersection of two surfaces created from the previous two 2D sketches. The order of the browser is as follows:
Sketch1
Sketch2
Revolution (surface)
Extrusion (surface)
3D Sketch 1
When I go back to edit Sketch 2, Sketch 1 is always showing...regardless of whether or not I turn on/off visibility. The visibility toggle has no effect. Sketch 2 has no projected geometry from Sketch 1.
Can you extend axis or planes in assembleys? I have a laser and I want to extend the axis of it to show the path it takes. I can extend it by clicking and dragging the end in the part, but not the assembly... is there a workaround?
View 2 Replies View RelatedHow do I turn sketch visibility on and off using ILogic rules.
View 3 Replies View RelatedI'm a playground designer and we're currently in the process of updating our systems to Inventor. Over the next few years I'm going to be working on many different assemblies all using the same parts and sub assemblies, many of which need to share the same ground plane.
I'm wondering if there is any easy/quick way to make certain parts (not all) automatically constrain/flush to the ground/XZ plane when I place them?
On one part, I have a bore hole drilled on a curved surface so the hole is actually an ellipse.
Now the other part I am trying to constrain together is the pipe that will be welded into the bore hole; so that is a simple circular pipe.
The issue is that the pipe has to be inserted 0.25" above the interior of the bore hole to allow for room for the weld. In order to do this I have tried to create a plane attached to the 3D ellipse and then constrain the pipe to be 0.25" above that plane. The problem is I cannot seem to create a plane attached to the 3D geometry; I cant even find a way to attach points, or pick the center point of the bore hole.
How to create a plane on 3D geometry and link it to said geometry. I'm using 2012, if that is necessary information.
At my company when producing drawings for manufacture we require a sheet for any steel profiles to be cut!..We do this by selecting the assembly from base view,hitting model view tab, selecting presentation and choosing the relevant profile from the drop down!
Once the profile is placed, we highlight the view and hit the parts list tab which obviously creates a parts list, but for the whole assembly, we then have to edit the parts list by turning off the visibility of the lines of all the parts which are not relevant!!...as you can imagine this is quite a laborious task if you have 50 different profiles.
The reason for this is to show the qty, steel grade and part number to the suppliers. My question is, any code that will take the lines of the parts list that are not relevant to the selected view and turn the visibility of those lines off?
I've managed to cobble this code together to turn some sketch visibilities on and off. However, what I'd really like to do is have a single sketch containing some blocks, and turn the visibility of the blocks on and off... How to call the blocks -
'Iterate through the sketches collection'Turn the edging indicators On And Off
For Each oSketch In oDoc.ComponentDefinition.Sketches Select Case
oSketch.NameCase "Front Edged"If E01 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Top Edged"If E02 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Back Edged"If E03 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Base Edged"If E04 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfEnd SelectNext
Since changing to Inventor I seem to be unable to turn off visibility of parts in assemblies on a drawing. Usually I just expand the view in the browser then right click on parts and turn off visibility. When I try this the visibility option is grey.
View 5 Replies View RelatedIt's 2012. I haven't found a setting in the dim style or the RMB options to turn off the extension line. I saw the posts showing drawing a sketch in the view but come on, all that to just turn off the line?
IV 2012 all sp & fixes
how to turn off the visibility of a specific sketch (ex. base_Sketch) of a certain part in assembly using vba?
View 3 Replies View RelatedI am patterning a sub-assembly which has a reference part that is not visible in the sub-assembly. I'm driving this sub-assembly with a quantity parameter and when addition instances are created, the hidden part turns visible. I can bring the sub-assembly in multiple times and the parts remains non-visible, however, once I pattern it, the part shows up in all instances except for the original.
View 1 Replies View RelatedIs there anyway that i can disable visibilty for ALL of the sketches under an assembly in a Assembly Layout? I have multiple assemblies (sub -assemblies) that im putting together into one finale assembly and everytime i unhide a sub-assembly, ALL of the sketches in it apear visible so then i have to painstakenly go throught every sketch and hide it. It takes for ever!
View 4 Replies View RelatedI there a way of finding each Bom structured part that is set to reference in an assembly and setting the view of that component to in-visible.
Also needs to iterate into all set View reps that where created and set all views to not show the referenced parts as well.
I use AddByNormalToCurve method to create a work plane in a sketch 3D. Is it possible to make new workplane object to be consumed by the parent Sketch3D (Workplane.Consumed = True) as it is possible in UI in Edit mode ?
My sample code in IV 2008:
Public Sub WorkPlane_Test()
'reference to the transient geometry
Dim oTG As TransientGeometry
Set oTG = ThisApplication.TransientGeometry
'reference to the component definition
[code]........
I having a stroke or something. I could swear I have used a work plane for a termination plane before in a Bolted Connection. Tried it just now and can't pick the work plane.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB