AutoCAD Inventor :: Create A Plane In Assembly Linked To 3D Geometry
Sep 24, 2012
On one part, I have a bore hole drilled on a curved surface so the hole is actually an ellipse.
Now the other part I am trying to constrain together is the pipe that will be welded into the bore hole; so that is a simple circular pipe.
The issue is that the pipe has to be inserted 0.25" above the interior of the bore hole to allow for room for the weld. In order to do this I have tried to create a plane attached to the 3D ellipse and then constrain the pipe to be 0.25" above that plane. The problem is I cannot seem to create a plane attached to the 3D geometry; I cant even find a way to attach points, or pick the center point of the bore hole.
How to create a plane on 3D geometry and link it to said geometry. I'm using 2012, if that is necessary information.
View 3 Replies
ADVERTISEMENT
Nov 12, 2013
I have a sketch on plane XY and I have another plane at an angle, which I would like to work on. How can I create a sketch on the angled plane, using the geometry from the XY sketch and which I can snap to?
View 5 Replies
View Related
Jan 9, 2012
I have an assembly where I have deleted a component, but it is still linked to the assembly somehow. The part is no longer visible in the model, is missing from the model tree and from the BOM, but it still prompts to save. I have attached screenshots to show what i mean: The file (00017429.ipt) prompting to save, despite not actually being in the assembly (00052857), the parts-only BOM showing that the part is not in the BOM, and the vault tab with the part highlighted.
I don't believe this is vault related because Inventor is prompting to save the 'deleted' file, and pack-and-go also grabs the 'deleted' file.
For the example shown, it is a minor nuisance because it means an extra drawing gets printed when an assembly with this problem gets used. I have just had the same problem happen on another, much more complex assembly and it is causing me major grief.
Inventor Pro 2012 SP1 (Build 190) 64bit
Vault Pro 2012 SP1
View 3 Replies
View Related
Jan 22, 2013
My goal is to open have people go into a central assembly file, type in their specific parameters and the various part files update within the assembly. I wish to do this without the need for an excel sheet, but when I try to link the parameters from the assembly file to the part files, it will not allow me to insert these parts. I get an error about an "assembly can not be placed into itself."
Iparts will not work as this has an infinite amount of sizes.
View 3 Replies
View Related
Sep 12, 2012
I have created a multi-value parameter in a part and exported it. I then linked it in the assembly but I am unable to edit it. I tried using iLogic but it also does not alter the part. Please see the attached 3 jpegs.
View 9 Replies
View Related
Dec 6, 2011
We have some serious problems by creating assembly drawings with reference geometries in inventor 2010. Our target is, to create a drawing that look the way, the attachment shows (Picture-1) The sheet metal plates Pos 10-100 are an assembly. And the assembly in the back is the reference geometry. It’s a frame consists of steel sections. What we want: 1. The frame must be phantom lined in the idw. 2.
The Sheet Metal parts must be thick lined. 3. The Partslist of the Assembly should only contain the sheet metal parts and not the frame We have some ideas to solve this case, but each of them is nor perfect (please see the attachment Box.pdf) And there’s another problem (described in part 3 of attachment), we cannot position viewports or drawing elements to each other exactly. You have no possibility to give them dependencies. Also if you want to position symbols to each other. All of them are only near to be exact, but that’s a big problem. If you change contents of a viewport, another should be aligned to it, but that doesn’t work.
View 2 Replies
View Related
Jan 9, 2012
I have a part file with work plane on it (visibility option is checked). When I put it on assembly file, the work plane is disappeared.The part file is on attachment.
View 3 Replies
View Related
Apr 27, 2012
Can you extend axis or planes in assembleys? I have a laser and I want to extend the axis of it to show the path it takes. I can extend it by clicking and dragging the end in the part, but not the assembly... is there a workaround?
View 2 Replies
View Related
Aug 13, 2013
I'm trying to setup an assembly based on a complex 3D sketch. In simplest terms, if I have a sketch for the perimeter of a house, I'd like to add instances of a 2x4.ipt at specified locations automatically. That's not necessarily every 16", but rather wherever I put a specific geometry. I'm imagining two work axis or sketch lines, one along the perimeter to determine the location of the 2x4 and one perpendicular to determine the direction the 2x4 points.
In actuality my sketch won't be a rectangle, but rather a complex 3D spline, that's why I'm hoping to get some sort of automated process. And the current design involves somewhere on the order of 1500-1800 2x4s. Making the sketches and geometry will be nightmarish enough, I'd prefer to be able to breeze through the assembly portion.
View 3 Replies
View Related
Sep 9, 2012
I have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.
Can I link faces within an assembly to one of the assembly components.
View 2 Replies
View Related
Apr 29, 2013
I have geometry not updating after replacing a component in an assembly.
I have drawn part A and in the assembly environment I have projected cut edges on a XY Plane in a 2D Sketch.
After replacing component A in the assembly with part B (not identical but very close) i was expecting the projected geometry to update. But it doesn't. The "local update" button is greyed out in assembly mode. also the Rebuild command does not seem to update the projected geometry.
I can see the new 3d shape and the old projected geometry. How to get the projected geometry to update?
Inventor 2013 Build 176 SP1.1
View 5 Replies
View Related
Aug 5, 2013
On AssemblyConstraints what is the difference between EntityOne(Two) and GeometryOne(Two). When should one be used over the other?
Likewise with AffectedOccurrenceOne(Two) and OccurrenceOne(Two).
View 2 Replies
View Related
Nov 14, 2011
I'm a playground designer and we're currently in the process of updating our systems to Inventor. Over the next few years I'm going to be working on many different assemblies all using the same parts and sub assemblies, many of which need to share the same ground plane.
I'm wondering if there is any easy/quick way to make certain parts (not all) automatically constrain/flush to the ground/XZ plane when I place them?
View 2 Replies
View Related
Jul 16, 2008
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 Replies
View Related
Jul 19, 2013
How to set the visibility of workplanes in an assembly file to false.?
View 3 Replies
View Related
Dec 14, 2012
On a couple assy's, I am trying to use pack&go to make self-contained versions of them.
Only problem is, the assy file (xxx.iam) and all sub-assy files are still linked to the component files in the original location even though the component files were copied to the new location with the P&G command
The whole point in this feature is to make self sufficient copies of something that don't depend on the original data.
This shows the settings I am using It is finding all the files ok. It just doesn't change the relationships on the new iam files. I could manually copy them and do the same thing this feature is doing.
Is there some hidden checkbox I need to find ? Note, I also tried once with "Include linked files" unchecked and got the same result.
View 4 Replies
View Related
Oct 6, 2011
there is a command or simple procedure to actively view a section plane in an assembly or part. I know there are the static methods of using slice graphics and section view however I'm looking to create a live section where I am able to constantly move the plane through the model thus altering the live section as it appears on screen, similar to the way a model can be viewed in Tekla with the cut section command.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 5 Replies
View Related
Feb 6, 2013
I'm using AutoCAD Map 3D. I had some geometry that I needed to convert into a shape file, so I selected on the shp layer "New Feature from Geometry". Everything converted to join the shape layer, but now it is all connected. I want to move/edit individual polygons but when I go to select one it selects all of them.
I've noticed I can "create new feature" one at a time, but I'd really like to find how to unlink them after I've converted them in bulk.
View 3 Replies
View Related
Dec 2, 2013
Is there a way to rotate the plane you're working on on the fly? I have (what is supposed to be) a 2d floor plan with multiple elements that have non-zero z values, a lot of which apparently cannot be exploded, or sliced (after turning them to surfaces), or anything else. I tried to simply "stretch" the non-zero z vertices down/up to the xy plane and the whole object moves up or down instead. (I'm also using a LISP routine by Lee Mac to do the actual flattening after the fact).
So, what I want to do is simply draw in the 2d geometry necessary to project the object onto the xy plane, and then delete the extraneous 3d lines/objects. However, I'm working on an isometric view (to make sure I'm drawing them in at z = 0), and AutoCAD apparently thinks I want to draw "walls" (yz plane) instead of "floors" (xy plane), if that makes any sense.
Is there some button I can press to change the working plane on the fly? Why AutoCAD wouldn't have this sort of functionality when a much simpler program such as Visual can do it (just by hitting TAB you can swap between the xy, xz, and yz planes).
Alternatively, flattening geometry that does not want to be flattened?
View 6 Replies
View Related
Jul 31, 2012
Is there a tutorial for importing 2D AutoCAD geomtetry and using it as a basis for your 3D sketches? I'm sure in a demo somewhere I saw someone using 2D layouts to quickly start creating 3D geometry from.
To clarify i'm not referring to the add-in in AutoCAD Labs but the actual process to do this using Inventor tools.
View 3 Replies
View Related
Nov 5, 2012
create a plane and mirror a solid?
I am planning to have the following workflow:
Plane creation:
Through the z-axis and at an angle of 7,5° to the XZ-Plane
Naming the plane - Mirror Plane
Turning off the plane visibility
Mirror solid:
Add mirrored solid to the existing solid
Here is a sample ao the code...
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oCol As ObjectCollection
oCol = ThisApplication.TransientObjects.CreateObjectCollection
'This does not work...
oCol.Add(oDoc.ComponentDefinition.SurfaceBodies(1))
'Here I want to create a new plane
Dim oPlane As WorkPlane
oPlane = oDoc.ComponentDefinition.WorkPlanes(1)
Dim oMirror As MirrorFeature
oMirror = oDoc.ComponentDefinition.Features.MirrorFeatures.Add(oCol, oPlane, False, kOptimizedCompute)
I have also attached a simplified part file where the code has been copied inti the iLogic browser
View 1 Replies
View Related
Dec 28, 2012
I have 2 different diameter cylinders and I would like to create a plane that is tangent to both.
View 7 Replies
View Related
Oct 25, 2012
I am trying to create two plane's one after the other like it is done in this video tutorial.
[URL]........
My problem begins with me only having 1 point on the part to pick for my 3 point plane command. In the video there is no bit where you are supposed to create a point but I'm thinking I wont be able to duplicate without doing something like that.
View 1 Replies
View Related
Oct 4, 2012
I have a robot model, and because he is a robot, he has a simple FK link structure. All the fk links work fine, except the wrists. when i rotate the wrists i get a skewing of the geometry of all the children below the wrist, and in the rotation gizmo on screen.
the are no link constraints in the hierarchy panel, and it is definately something to do with the fk link because if i unlink the wrist from the forearm it rotates normally.
the children rotate normally indepant of the wrist collectively and individually
View 2 Replies
View Related
Mar 19, 2012
I want to create a structure using the attached part geometry, what would be the best way to make the crosses coincident with the two long columns? (just like the 2 at the top but without having to manually trim each line, if it could be constrained to variable parameters even better)
The structure has the same geometry on all four sides so i intend to circular patern the frame generator components around the Z axis, any better workflows?
View 5 Replies
View Related
Aug 20, 2012
How to create a work plane that is perpendicular to a surface? I'm trying to do this so that I can "split" the object into two separate entities where the plane is.
View 9 Replies
View Related
Jan 30, 2012
I have a scene set up like the picture below but for some reason when I go to render it out, the geometry isn't there for the plane object. I've set it up like that because I have the ball emitting fire and then deflectors along the plane so the particles move across them as if they fire was contained and the particle system reacts in this way but in the final render the geometry for the plane isn't there. I've went through the object properties and renderable is checked.
3DS Max 2012
Mudbox 2012
Windows 7 Ultimate 64 Bit
AMD Phenom 9350e Quad-Core Processor 2.0GHz
NVIDIA GeForce 6150SE
4 GB RAM
View 6 Replies
View Related
Jan 17, 2012
I'm trying to create a solid using the inside geometry of a shell in Inventor 2011. is there a simple way of doing this? i have attached the part i'm working on and need a solid that represents the free space inside the shell.
View 2 Replies
View Related
Sep 14, 2009
I'm using Inventor 2009.
Imagine a flat, rectangular plate with origin plains located symmetrically down the middle of the plate. Place a component, say a small cube, and constrain it to the face of the plate and the origin planes so that it too is symmetrically located. I now wish to pattern this cube about the midplane and create a total of five instances. I select "Pattern Component" in assembly mode and select the cube. For direction 1, I put in two instances and select an edge of the plate so that the pattern is taken to the left of the midplane. For direction 2, I again select two instances but pick an edge so that the pattern is taken to the right of the midplane. I now should have a total of 5 cubes but I don't. I have 6.
The second pattern is actually a repeating pattern of the first which, in the end, creates too many cubes. Visually, it looks correct because the cubes are placed excatly on top of each other. Numercially, like in BOMS, it is not correct.
Is there a way to avoid these duplications?
View 8 Replies
View Related
Nov 6, 2012
I am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies
View Related
Jul 13, 2013
How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies
View Related
