Is there a tutorial for importing 2D AutoCAD geomtetry and using it as a basis for your 3D sketches? I'm sure in a demo somewhere I saw someone using 2D layouts to quickly start creating 3D geometry from.
To clarify i'm not referring to the add-in in AutoCAD Labs but the actual process to do this using Inventor tools.
How can you force the geometry of reference parts to print behind to print behind your visible parts. I have my reference parts print out on a light gray layer to be shown indistinct on a drawings, but it prints over my object lines in effect hiding them. This is even true if a reference part is hidden. Then hidden line will print over the object lines as well.
View 4 Replies View RelatedCurrently I save all my 2D DWGs as IGES files and then import the files into Inventor. That converts all the geometry to Construction Wires in an IPT, which means MUCH improved performance (you don't have to wait for Inventor to convert every single entity in the DWG to a Sketch entity). I then start a new Sketch and Project those lines that I need from the Construction Wires.
Is there a way to do this directly (convert to Construction Wires) with a DWG, without having to save as an IGES file first?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedOn one part, I have a bore hole drilled on a curved surface so the hole is actually an ellipse.
Now the other part I am trying to constrain together is the pipe that will be welded into the bore hole; so that is a simple circular pipe.
The issue is that the pipe has to be inserted 0.25" above the interior of the bore hole to allow for room for the weld. In order to do this I have tried to create a plane attached to the 3D ellipse and then constrain the pipe to be 0.25" above that plane. The problem is I cannot seem to create a plane attached to the 3D geometry; I cant even find a way to attach points, or pick the center point of the bore hole.
How to create a plane on 3D geometry and link it to said geometry. I'm using 2012, if that is necessary information.
I want to create a structure using the attached part geometry, what would be the best way to make the crosses coincident with the two long columns? (just like the 2 at the top but without having to manually trim each line, if it could be constrained to variable parameters even better)
The structure has the same geometry on all four sides so i intend to circular patern the frame generator components around the Z axis, any better workflows?
I'm trying to create a solid using the inside geometry of a shell in Inventor 2011. is there a simple way of doing this? i have attached the part i'm working on and need a solid that represents the free space inside the shell.
View 2 Replies View RelatedI am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies View RelatedWe are trying to switch to a new parts list format, and the goal is to have all of our parts list imported from excel spreadsheets. The problem we are having is that we cannot import from excel and maintain the format from excel. The problem seems to be with merged cells. I have tried it both by: 1) Annotate > General > Table and 2) Manage > Insert > Insert Object with no success. I have a non-ideal work-around for this by inserting the "QTY PER ASSY" separately as a sketch symbol.
Attached is a sample of what we would like our parts list to look like. The red rectangle outline is what would be imported from excel.
I am needing to create some new parts with miters that will reflect how they will be cut on our tube laser. I have attached a part sample that someone else has created. How to change this into a part that will work for me, so I'm wanting to start brand new.
I am needing the surface of the miter to be perpendicular to the material all through the miter. How would I accomplish this?
I was wondering if you create the parts then assemble them. Or can you create and assembly then break out the parts? I am just testing inventor out to see if it would be good for my company.
View 9 Replies View RelatedWhen creating a new part in an assembly and I select a face of an existing component, how does Inventor determine the orientation and origin of that new part? I understand how Inventor works when I select the plane/origin of a part or pick out in space in the assembly.But the placement based on the face of an existing component seems random..
I normally do not like creating parts inside of an assembly but I was trying some new workflows.
We have thousands of parts & assemblies, and want to create a thumbnail image of each for use with our production software. Unfortunately task scheduler only exports to solid models, not images. How to achieve this via macros, VB or iLogic. The process would go something like:
1) open (each) file
2) turn 'all work features off' (not essential but it would be nice so work planes don't show up in the thumbnail)
3) go to 'home view'
4) zoom to extents or zoom all
5) 'save copy as' to a set location (not same location as part or assy) with file name of "<PartNumber>.png" (not same as original filename)
6) turn 'all work features on' (if we managed to turn them off)
7) close (and repeat process for the remaining parts & assy's).
Is it possible to create a drawing parts-list style from a built parts-list in the drawing?
View 4 Replies View RelatedI am trying to create a loft to shaped a back cushion and then send the loft to all parts. But I do not see Loft as an option under assembly level.
View 5 Replies View RelatedI am trying to make a chute out of 4 pieces of sheet metal. Is there a way to take a solid lofted part, shell it, and then break off each side of the the object for cutting and welding them together. I have an example attached.
View 9 Replies View RelatedI am having some trouble with assemblies. What I want to do is, create multiple assemblies with moving parts and then assemble them all in one assembly. When I do this, the assemblies with moving parts come in as "blocks" and the parts will not move.
View 8 Replies View RelatedAfter reading the documentation for IV 2013, I'm not sure if it's possible to create a midplane between parallel faces of two different parts or not. I've tried using the workplane buttons in both the 3D Model and the Assembly tabs with no joy.
Product Design Suite 2013 Ultimate
Windows 7 64-bit
Intel Core 2 Quad Q9300 2.5GHz
8 GB RAM
Nvidia GeForce 8800 GT
I'm using Inventor Professional 2014
I created several Parts with the Shaft Generator, and from one moment to another it always says that it can't update the part file with the new shaft when I press Ok.
Here is the original error, I'm german, so of cause its in german, but i discribed above what it says:
Komponente C:UsersManuelGoogle DriveProjekteEigene ÜbungenTest2Konstruktions-AssistentWelle1.ipt konnte nicht aktualisiert werden. Welle konnte nicht erstellt werden.
I have 5 separate .ipt's that were created within a major assembly. Is it possible to generate a subassembly of those 5 separate .ipt's within the major assembly keeping all the constraints?
OR
Do I have to start a separate .iam file and import each .ipt and regenerate the complicated constraints all over again?
Is it possible to have iLogic rule create parts lists out of View Representations? [URL] .......
View 9 Replies View RelatedFrom a VB.Net program, I'm trying to create a dimension on a drawing document between two parts in an assembly. I can get the parts using component occurrence. The line marked below throws the following error: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)).
As you may see, I have allocated memory for both "Edge" and "Face" (Dim oEdge1 As Face) albeit one is commented out. Attached is the screen shots from the attribute helper add-in. In it, you will notice that the attributes are of type: "Face".
Public Sub CreateDrawingDimension(ByVal Part1 As String, ByVal Part2 As String, ByVal AttName1 As String, ByVal AttName2 As String)
' Get the Active Drawing document
Dim oDrawDoc As Inventor.DrawingDocument
oDrawDoc = invApp.ActiveDocument
[code]........
I have been using Inventor 2011 and I have noticed that I can’t create a component *.IAM in place if there is a content center part that is selected. I am saving content center parts as custom.
View 8 Replies View RelatedI have assemblies that are comprised of reference parts - the assembly is a purchased part such as an air cylinder. I have them as reference only in the assembly (ie right click on the parts in the model tree->BOM Reference->Reference). I do it this way so I can adjust the air cylinder how I need it, but still only asign one part number to the whole assembly - as an example we'll say "cylinderX" is the part number, and filename is "cylinderX.iam"
The problem arises when I put cylinderX.iam into other assemblies and try and make drawings of those assemblies. Even though cylinderX.iam is not a reference part (but all it's sub components are), it shows up in an IDW just like reference parts. I am able to make it show up how I want by editing the view properties (Edit View->Model State Tab->Reference Data Line Style "as parts"), but I still cannot balloon cylinderX.iam. It shows up in the parts list, but I cannot attach a balloon to it.
Inventor 2013, 64-Bit
Dell Precision M6700
Windows 7 Pro
Intel Core i7-3820QM @ 2.70 GHz
16 GB Ram
NVIDIA Quadro K4000M
Space Navigator
I have a macro that I acquired somewhere (possibly these boards, can't remember now) for placing a parts list. I have modified it somewhat to change the location on the sheet where the list gets placed, as well as a sub that starts the autoballoon command afterward.
The macro is set up to place the parts list in the upper left corner, by adding the parts list width to the Mini Point of the border. This works perfectly well, except that we have two parts list styles, and they are differently sized.
What I would like to do is have the macro detect the parts list style, and change the offset value depending on which style it finds. I am an extreme novice with the API, who basically knows just enough to tweak sample code a bit, and have not been able to find anything close enough to use as an example.
How I should go about this, or even post some samples of something similar? Current code is shown below.
Public Sub CreatePartsList() On Error Resume Next ' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet. Dim oSheet As Sheet Set oSheet = oDrawDoc.ActiveSheet ' Set a reference to the first drawing view on ' the sheet. This assumes the first drawing ' view on the sheet is not a draft view. Dim oDrawingView As DrawingView Set oDrawingView = [code].......
The macro does not have to set the parts list style - that is controlled by the drawing Standard. It just needs to detect what it is, and place the list accordingly.
I am trying to create a Treeview of Model tree which displays parts assembly...etc My code is working well and i am able to get the tree view, but the problem is how can i count the quantity of parts/assemblies and display as consolidated. For instance this below snapshot shows my treeview.
This above snapshot shows my output
Here besides all parts/assemblies i get Semi-Colons and Numbers rather than consolidated view For this part in fig
153049 QSL.1_8.8:1
153049 QSL.1_8.8:3
153049 QSL.1_8.8:3
153049 QSL.1_8.8
and Quantity as 3 separately.
Let me start by saying that we rarely use sheet metal parts so I'm not real familiar with that interface. That said, I can create sheet metal parts with square shapes and bends just fine. However, I'm currently stumped as to the best way to model what should be a pretty simple plate.
We have a large, thin (1/8") square plate to which we want to add 2 opposing diagonal very slight breaks to add stiffness to the plate. More specifically, we want these diagonal bends to cover the center part of the plate leaving about a 2" flat flange all the way around the plate.
I'm using Map 3D 2012 with Oracle 11g. I created an enterprise project with an industry model with water and wastewater modules. After this i created my feature classes and defined the utility model linking the geometry feature class to the attribute ones (ex: WA_POINT to WA_ARMATURE, WA_VALVE, WA_HYDRANT etc.).
At this moment i have to import a large amount of data from *.shp or *.sdf files, but theese files contain geometric and attribute data together.
How can i import the geometry from the shp or sdf file to the geometry feature class (ex: WA_POINT) and the attributes to the attribute feature class (ex: WA_VALVE), while creating the reference between the geometry and attribute feature classes?
I tried bulk-copying the geometry, but it doesn't create the coresponding attribute feature.
i need import a dwg to inventor for create a solid.
The problem is when a import the file, in the "layers and objects import options" , inventor don't show me some layers present in the dwg.
I want to create a dynamic block from existing geometry using C#.
View 1 Replies View RelatedI would like to create a construction geometry that would behave as the Polyline Bulge. In other worlds I would like to create a Construction Arc that would have a Bulge. Upon examination, I was not able to locate any of the Construction Geometry that has a bulge.
The purpose of this is to determine the Bulge location (direction) of the polyline I am creating.
I would like to stay away from creating a database geometry, if possible.