i need import a dwg to inventor for create a solid.
The problem is when a import the file, in the "layers and objects import options" , inventor don't show me some layers present in the dwg.
I have this igs file from my customer and trying to convert it into solid but not been able to do it.
View 9 Replies View RelatedI have a drawing in AutoCAD 2013 with carefully laid out hatch patterns for traced text using clean, closed, non-overlapping, polylines only. (with islands in the holes). When I import this into Inventor sketch the hatch comes through but the islands do not. Such as the 0 gets completely filled in. I don't have the ability to edit this hatch and add the islands.
I can import the dwg without hatch and fill it within Inventor, but I need to have all the enpoints constrained, or the Fill command won't recognize the boundaries. If I import this with contraining the endpoints, then the import takes a very long time (I gave up after waiting 5 minutes).
I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
View 1 Replies View RelatedTwo IGES parts and try to convert them to a solid. I've tried all I can think of with no good result.
I can't get them uploaded, file is too large, what can I do?
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I like to create a chin from 2 ellipses profile. I used the Loft command and it does not allow me to complete the command. Did I use the right command wrongly? Or there is another way to do so?
View 4 Replies View RelatedI used surfaces to try and create a solid but it will not sculpt...new to this feature...Can it be made into a solid the surfaces or is there another far better way to create?
View 9 Replies View RelatedI try to migrate our ObjectArx Api to Inventor. Therefore I need a function to create a mesh from a solid.
With Autocad .Net Api, I can use GetObjectMesh(DbObject obj, MeshFaceterData parameter). Does in the Inventor Api a similar function exist?
In the parameters I need to set the deviation in the same way as in the Autocad .Net Api.
Example:
FaceterDevNormal = 0.1;
FaceterDevSurface = 0.1;
FaceterMeshType = 2;
I have two .dwg files that represent two different surfaces. I would like to import each .dwg file into Inventor, then create a solid with the original surfaces serving as the top and bottom. I can send the .dwg files if necessary.
View 9 Replies View RelatedI have just downloaded an educational version of Inventor. Although I can create sketches I cannot extrude the sketch to form a solid. The origin arrow heads appear over size and it seems as if the origin plane is being extruded to form a solid!
View 2 Replies View Relatedcreate a plane and mirror a solid?
I am planning to have the following workflow:
Plane creation:
Through the z-axis and at an angle of 7,5° to the XZ-Plane
Naming the plane - Mirror Plane
Turning off the plane visibility
Mirror solid:
Add mirrored solid to the existing solid
Here is a sample ao the code...
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oCol As ObjectCollection
oCol = ThisApplication.TransientObjects.CreateObjectCollection
'This does not work...
oCol.Add(oDoc.ComponentDefinition.SurfaceBodies(1))
'Here I want to create a new plane
Dim oPlane As WorkPlane
oPlane = oDoc.ComponentDefinition.WorkPlanes(1)
Dim oMirror As MirrorFeature
oMirror = oDoc.ComponentDefinition.Features.MirrorFeatures.Add(oCol, oPlane, False, kOptimizedCompute)
I have also attached a simplified part file where the code has been copied inti the iLogic browser
How to create a Circular Pattern of the Solid Object by VBA. I tried it by calculation Polar Transformations but was unsuccessful.
Then Rotated the complete Solid Object which changed original location. Is there any way i can Change the Angle and Mirror instead of Making circular pattern.
I am trying to make a chute out of 4 pieces of sheet metal. Is there a way to take a solid lofted part, shell it, and then break off each side of the the object for cutting and welding them together. I have an example attached.
View 9 Replies View RelatedI just installed Inventor 2012 two days ago and obviously no training yet. My boss asked me to do a part for GibbsCAM which includes a 7/8" left hand wire rope imprint in a block of steel for this afternoon's production. I have my block done, what is the best way to do this? I'm thinking create a wire rope solid to cut out of my block. Would I use the thread tool: that's not the same but would it work?... I don't need a representation. I need the read thing that will work!
View 2 Replies View RelatedI'm trying to create a solid object that can be used for injection molding. My office has Inventor, but I'm only familiar with 3D Max. If I create the object with Nurbs in 3D Max, can I export it so that Inventor reads it as a solid object, and if so, how?
View 1 Replies View Relatedif i draw up a 3d sold part as the finished part, can i then draw a new rectangle solid body over the top of this and split the new solid body using the part as the split tool?
the idea being that i am left with a rectangular plate with a female 3d impression of the finished part in the top.I can't seem to use the part as a split tool?
“Associative body copy API Sample” 2013 API help.
The above code in the API help shows how to do an associative or a non-associative copy in an assembly of one part into another part. ..BUT the non-associative copy does not always work correctly....
I have been testing this sample code and notice the following limitations with the lower part entitled “Create a non-associative solid base feature in the second part”...
The code uses the proxy body for the source object but it does not use the proxybody for the target object and therefore the relative positioning is wrong for the nonparametricbasefeature when it is created in the target object if the real target body is in a different place than the targetbodyproxy (e.g. it has been rotated/moved in assembly space).
I notice that if you perform this manually using the “copy object” button the relative positioning is maintained correctly even if both target and source objects have been rotated/moved in the assembly...
I'm trying to create a solid using the inside geometry of a shell in Inventor 2011. is there a simple way of doing this? i have attached the part i'm working on and need a solid that represents the free space inside the shell.
View 2 Replies View RelatedI want to create one Spur Gear in inventor with equations such that i can build more gears from this base model using excel table. For. Eg. I would like to create a gear with 40 No. of teeth of 10DP, and 20°PA, with Pitch Circle Dia, Base CIrcle Dia, Tooth Thickness based on spur gear calculations.
Now i would like to create a series of such spur gears with varying no. of teeth, i.e. 42, 44, 46, 48, 50..etc. Now if i change the No of teeth ,Accordingly the gear should modify its pitch dia, Base circle dia, Tooth Thickness which would be noted in the Equation.
how to create thes equations and use these in creating gear with different no. of teeth.
I have shown below list of gear data for various no. of gear.
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
Is there a tutorial for importing 2D AutoCAD geomtetry and using it as a basis for your 3D sketches? I'm sure in a demo somewhere I saw someone using 2D layouts to quickly start creating 3D geometry from.
To clarify i'm not referring to the add-in in AutoCAD Labs but the actual process to do this using Inventor tools.
As part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).
A 3d polyline was created from the lines joining the points and I have that in the attached drawing.
I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.
Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View RelatedI'm trying to create a Solid 3d that is the extrusion solid af a closed polyline by a given height
I select the polyline that i do this
Solid3d s = new Solid3d();
s.CreateExtrudedSolid(selectedPolyline, new Vector3d(0, 0, 20), new SweepOptions());
but Autocad throw an Invalid Input exception.
I'm trying to create a 3D solid from four 3d polylines that represent a bridge deck .
If it is not possible to create a 3D solid, can i create a surface?
I have a mesh box here, and I need this mesh box had shape like the form I drew with polylines. there is a picture of it. I tryed mesh modeling,but no luck, because I need exactly the shape (of mesh box), that is drawn with polyline
View 1 Replies View RelatedI have attached an image of the chair i'm modelling, I need to create the back and seat but can't find a way of modelling the curve feature. I can create the oval shape and extrude to 3d, fillet the edges etc but can't curve it. I'm new to 3D Modelling
View 9 Replies View RelatedUsing AutoCAD 2014 I'm trying to model the tummy cut on the back of a guitar similar to this:
2013-06-03_15-46-23_140_zps0a2815e5.jpg
I've modeled it to my liking using a mesh surface, how can I "subtract" this area from my 3d solid body? I also have Fusion360, but don't really know how to use it.
I am using AutoCAD R14. I need to create a solid which is sort of wedge shaped. But the top surface twists (like a propeller blade). So it is not in any one plane. Also, that surface is not square (no right angles). The bottom surface is flat and in the x-y plane. It is a quadrilateral. The other three sides are a rectangular flat surface and two triangular flat surfaces.
I don't know how to create this shape as a solid. I was able to create several polylines to accurately describe the shape but then when I tried to join them together to create a solid using the UNION command I get the following error message: "At least two solids or coplanar regions must be selected." How can I create this solid?