AutoCAD 2013 :: Create 3D Solid Object
Jan 23, 2013Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies
ADVERTISEMENT
AutoCAD 2013 :: Make Object Into 3D Solid After Exploding?
Oct 14, 2013If I modify a 3D solid and it is left with two seperate pieces it is still one solid piece, even though there are two parts. My question is: What if only need one of those two sides? If I explode the object and delete the one side I cannot change the remaining object into a 3D solid. It remains as surface object.
How can make an object into a 3D solid after exploding it? I belive there is a simple command like union or some other but I can't remember.
AutoCAD Inventor :: How To Create Circular Pattern Of Solid Object
Jan 9, 2012How to create a Circular Pattern of the Solid Object by VBA. I tried it by calculation Polar Transformations but was unsuccessful.
Then Rotated the complete Solid Object which changed original location. Is there any way i can Change the Angle and Mirror instead of Making circular pattern.
AutoCad 3D :: Create Solid Object From Space Bounded By Surfaces?
May 10, 2012Basically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
AutoCAD Inventor :: Create Solid Object That Can Be Used For Injection Molding?
Mar 20, 2012I'm trying to create a solid object that can be used for injection molding. My office has Inventor, but I'm only familiar with 3D Max. If I create the object with Nurbs in 3D Max, can I export it so that Inventor reads it as a solid object, and if so, how?
View 1 Replies View RelatedAutoCAD 2013 :: Access Solid From Drawing File Using Object ARX
Jun 7, 2012I want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies View RelatedAutoCAD 2013 :: How To Make Collection Of Surfaces Into Single Solid Object
May 5, 2013I'm working on a project, and I need to make this collection of surfaces into a single solid object. I tried using sculpt, and after a few hours of trying to find the leak, I have failed. not watertight.
Also, I need to get this thing to a cnc mill, and they keep asking me for 2d drawings, dimensions, and tolerances. I assumed the 3d file would be good enough. How to make a file ready for a cnc, and how to make 2d drawings without putting 600 measurements all over the image? Every time I try to do a 2d object, the whole thing is a mess.
AutoCAD 2013 :: Create Solid By Lofting Between Two Section
Jan 30, 2013If you can create a solid by lofting between two section, in this case they are 3d polylines, along a given path. The path is at the top of the sections. Using the loft command I have to key in the PO ( point ) option several times to get the path option to show then when I select the path it gets treated as another section. See attached.
View 8 Replies View RelatedAutoCAD 2013 :: Turning Bunch Of Points Into Solid Object - Loft Command
Mar 16, 2013I have a bunch of points that I am trying to turn into a solid object. I am doing this by using the 3D poly command and then LOFT, UNION and CONVTOSOLID. this has previously worked well, but this time when I use the LOFT command it does not produce a 'closed' surface, but rather a grid like surface which wont convert to a solid. Are there different settings for the LOFT command, and if so, How do I change them to produce a closed surface?
View 4 Replies View RelatedAutoCAD 2013 :: Create Viewport Of Solid In Layout And Dimension Inside And Outside Diameters
Aug 8, 2012Having trouble with diameter and radial dimensions since upgrading to 2013.
For example, draw two concentric circles and Presspull (or Extrude and Subtract) so that you get a hollow cylinder. Then create a viewport of this solid in a layout, and try to dimension the inside and outside diameters.
One of the two dimensions will work properly (seems to vary which one). The other will magically "jump" when placed (ex. the OD dimension will jump and become the ID, or vice versa).
How to resolve this? Our guys are having to do absurd things like redrawing the circle in paper space and dimensioning to it with a scale factor. Is this some sort of 2013 bug, or a setting?
Inventor 2013
Windows 7 64 Bit
AutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?
Sep 16, 2013How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAutoCAD 2013 :: Create Parametrization On 3D Simple Object Box
Dec 25, 2012I trying, trying to create parametrization on 3d simple object - box. And it is no result. Why it works on 2d drawing but doesn't work on 3d... Can I someway link 3d object to 3d object? Just like in Inventor for example.
View 6 Replies View RelatedAutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedAutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern
Dec 13, 2012i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedAutoCAD 2013 :: Create Invisible Extrusion Rather Than Cutting Into Object
Sep 28, 2012Press/pull has been working fine up until now. When I try to press/pull a boundary, it creates an invisible extrusion rather than cutting into the object.
View 3 Replies View RelatedAutoCad 3D :: Making Object Solid?
Apr 18, 2012im making a cnc milling machine and need to make some things to make. This is a clamp between the magazine and the barrle of a shotgun and i made the drawing in 2d to start whit and then used the EXTRUDE to make it inn to 3d.
As you can see on the top of the object there is no surface and the same goes for the buttom. How can i make a surface?
[URL]
AutoCad 3D :: How To Extend Solid Object
Jan 22, 2012how to extend a solid object. You can see at the picture that I attached what I mean and also I will try to explain. I draw a fence 1.5 m high. At one specific part of the yard I want the fence to be 2.0 m high. So I moved upper part (horisontal) of the fence to the height of 2.0 m. Now I want the 2 vertical poles to "extend" to that height. Now I can delete those poles and use extend command from the bottom and then use silce command. I was just wondering if their is a command that I can use to grab the pole as it is now and pull it up to the new height if that is possible without erasing it.
View 9 Replies View RelatedAutoCad 3D :: How To Draw Solid Object
Apr 22, 2013I'm trying to draw a solid object. I have the top and bottom base, and all I want is to loft that thing, but when I do, it only lofts the limits - it results in a hollow object.
View 7 Replies View RelatedAutoCAD 2010 :: Volume Of Solid Object?
Apr 4, 2012Is Autocad have a command to calculate the volume of a solid object? If so, it would come in handy at times.
View 1 Replies View RelatedAutoCad 3D :: Solid Assembly With One Object Transparent?
May 29, 2012I am currently working on an assembly and want to view it as an isometric view, but, I want to see parts behind a particular object. My question, Is there a way to change the transparency of one object without changing the effects of the other parts? I want to be able to see the front object as well as the one behind it.
View 3 Replies View RelatedAutoCad 3D :: Mesh To Solid - Object Cannot Be Converted
Aug 3, 2011I am trying to convert a mesh to solid in AutoCAD 2010 using the CONVTOSOLID command but I get this message . . .
'Mesh not converted because it is not closed or it self-intersects. Object cannot be converted.'
Is there another way of achieving this?
AutoCad 3D :: Creating Complex 3D Object / Solid
Aug 31, 2012I have the 3d model of a ship, but it has no surfaces or solids, just lines. I want to create some solids based on those lines.
It's better if i attach the dwg to the post and explain what i want to do:
- in the file attached there are some lines marked with red and blue
- i want to create a solid/3dobject by extruding/lofting the red lines along the blue lines.
In the drawing only a few lines are colored, for better understanding. I tried with loft, but it only creates some surfaces. The point is that i need a solid or a 3d object.
sampla.dwg
AutoCAD 2010 :: Trying To Shell A Solid Object
Nov 26, 2012I'm currently encountering issues when trying to shell a solid object (any). The command doesn't work for me.
View 1 Replies View RelatedAutoCAD Inventor :: Cannot SPLIT SOLID Entity / Object
Jun 11, 2012I do have a problem on SPLIT feature. I cannot seem to apply SPLIT SOLID into an entity/object but, on the other object I am able to apply SPLIT SOLID.
Sketch created using MultiBody and would like to make use of "Make Components" to create an assembly as well as parts.
I have attach a zip file of the ipt. I am currently using Autodesk Inventor Suite 2012.
AutoCAD VB :: How To Reach 3D Object Volume With Solid Selection
Apr 28, 2012I can use SolidSelection.Item for 3D object's handles and but I can't take 3D object's volumes with SolidSelection.
Then I can put object 's handles(1EE) to a collection. Can I use SolidSelection to keep my 3D volumes values? All sub-structure of my program works with SolidSelection Object.
Volume Codes;
For Each tEnt In ThisDrawing.ModelSpace
If TypeOf tEnt Is Acad3DSolid Then
Dim tEntSolid As Acad3DSolid
Set tEntSolid = tEnt
tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume)
End If
Next
I can't match with returned result of these codes and SolidSelection.item(i)
For Each tEnt In ThisDrawing.ModelSpace
If TypeOf tEnt Is Acad3DSolid Then
Dim tEntSolid As Acad3DSolid
Set tEntSolid = tEnt
tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume)
[code]......
AutoCad :: Convert Object Made With 3D Lines Into Solid?
Aug 1, 2012I drew a 3d shape using 3dpoly and I want to convert that drawing,which is now only a 3d sketch, into a solid.I have attached a picture of the lines sketch sulita.jpg.
View 9 Replies View RelatedAutoCAD VB :: How To Show 3D Solid Object Name On Isometric View
Apr 23, 2012I wrote a program that I can give a name automaticly for all 3d solid objects.
But I want to show a little box on isometric view every names with VBA codes.
How can I show 3D Solid object's name on isometric view?
I try to show on Attachment.
AutoCad 3D :: Copy / Paste Solid Object To Excel
Aug 31, 2012I am attempting to copy and paste a part of a drawing from AutoCAD 2011 into ms, Excel or Word. I am able to copy within a vport so my whole screen is not copied. My problem is only 2D objects show up when I paste. I tried different visual styles and colors but still cant get my solid objects to appear.
View 7 Replies View RelatedAutoCad 3D :: To Remove Redundant Lines From 3D Solid Object
May 4, 2011I cant seem to get the clean command to do anything, it asks whether i want
[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
so i type "L"
it says select object
i click the solid
it says [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] again...
AutoCad 3D :: Convert 3D Drawing Via Line To 3D Object / Solid
Jan 29, 2014How to convert 3D drawing drawn using the line in the 3D object / solid? Drawing is the image below and drawn using lines and polylines and I not use extrude options or other 3D options. [URL] .......
View 6 Replies View Related