I am currently working on an assembly and want to view it as an isometric view, but, I want to see parts behind a particular object. My question, Is there a way to change the transparency of one object without changing the effects of the other parts? I want to be able to see the front object as well as the one behind it.
View 3 RepliesHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I have created this rendering and for some reason the metal plate which is supposed to be non-transparent is showing up with some transparency.
I'm using the diamond plate material that comes with AutoCAD. There is no transparency setting with this material so I can't set it to non-transparent. Short of trying some different materials, I was thinking there must be some way of resolving this.
Working with AutoCAD 2012:
I have a solid object whose layer I make transparent. It is transparent, but it leaves little grey dots in model space and paper space. Dot size and spacing doesnt' change when I zoom in and out.
6-24-2013 12-39-54 PM.png
This is a new machine (Windows 7) and it never happened on my old machine (Windows XP). I want the dots to go away.
Here is the DWG file: Drawing1.dwg
Lately I've been trying to plot a drawing with solid hatches of varying transparencies to pdf in Autocad 2011. I have plotted drawings like this successfully before, but with this particular document, the hatches are being rendered with a strange texture of horizontal lines as if printed by an inkjet printer running low on ink. An example is attached - all hatches should be smooth.
zone sections.pdf
I have experimented with some variables and found that it only happens when the layers containing these hatches have any value for transparency other than 0, regardless of whether they overlap.
I've tried copying just the lines and hatches shown in the attachment to a separate dwg and the result is the same.
I need to make two parts act solid. That is, that they need to slide and react as if they were real instead of just going through eachother. In the assembly included, the "rotator" needs to rotate as it is pulled through the "rifled column (2)". The other constraints in the assembly are fine as is, but if I can make these parts react correctly, then the center pole and blade will rotate.
View 3 Replies View RelatedI have a set of scanned drawings that they wanted marked up via AutoCAD to use for submittals. I made a nice check mark for all the "good" dimensions using a solid green hatch (which plots as green).
I brought the scanned drawings in as xref TIFFs and put my autocad objects over them. Problem is that when I go to PDF them, the check marks are transparent and I really don't want them to be. I've never messed with any transparency settings in our CAD and I've only noticed this issue when printing over top of images.
This is in Carlson 2014 BTW.
I am importing solidworks assembly files into AutoCAD 2014. They show up fine after importing them. It says the assembly is in inches but when i go into the individual parts blocks they are all 25.4 scale. Is there a way to not have all the parts scaled up when it is imported?
View 4 Replies View RelatedI'm trying to do a stress analysis on assembly with a mixture of thin bodies and solid bodies. The problem is that when I create the automatic contacts they are created as either all thin body or all solid body contacts. This of course causes the analysis to fail. It appears that there is no way to make a thin body contact become a solid body contact or vice versa.
I tried to run the entire thing as solid bodies but the I had to stop the analysis after 18 hours of continuous processing. (and a memory upgrade)
Is there a way to overlay a transparent background png image on a solid or mesh that already has a material assigned? i.e. a chrome object with a decal applied. I have tried creating a new material using my png file as the image but have not been able to overlay it on an object where I want to see the material underneath.
View 1 Replies View RelatedMy issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
I would like to export a solid assembly (or derived part of the assembly) as a Spatial Array for use in Matlab. Only a simplistic solid definition is needed such that each element of the array is either 1 or 0.
How I can achieve this and ideally how I can choose the resolution of the array?
as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies View RelatedI am having issues with an assembly, when i open it by an import, from CATIA to Inventor, the assembly parts seem to be transparent.
View 1 Replies View RelatedI'm sure there's a way to do this but for the life of me I can't remember and can't find it when I do a search. I have an object that is comprised of several lines that are grouped together, and I want to fill the entire group with a fractal cloud 3-color fill. In order to do so, I am creating the fill as a background, and making the object transparent, but when I do that, all my lines disappear (of course!) but I need the lines in it for details. Basically I want to layer this object
View 9 Replies View RelatedI just noticed that my assemblies are turning transparent when I edit them anymore. It was working the other day and I haven't changed any settings or downloaded any service packs so I don't know why it stopped doing this and for the life of me I cannot figure out how to make it start again. I have just recently upgraded (if you want to call it an upgrade) to Inventor Pro 2013 from 2011 so I'm not quite sure how to change everything else.
Windows 7 64 bit w/16 gb ram
Intel i7 2600 3.4 ghz
AMD Radeon HD 6450
PDSU 2013
Windows 7 64 bit
16 GB ram
Intel i7 2600 3.4 ghz
AMD radeon HD 6450
PDSU 2013
Is there a way to move a solid part in an assy using grip snaps and a specific vector direction .
Please look at the attachment,here you will see a gusset positioned on top of a foot plate,the gusset needs to be moved so that it makes contact with the cylinder,it will then be welded. The problem is more difficult because the gusset is offset to the axis of the cylinder and the precise distance is unknown unless worked out using trigonometry.
The question is what is the best method of moving the gusset to the precise distance and direction ?
When I double-click on a component in an assembly to edit it, the rest of the assembly becomes transparent (or translucent is a more accurate term). Is there a way to create a visual style (or use some other method) to make the entire assembly translucent like this, just as I'm working with the assembly performing all the usual assembly-type operations? For example, I can operate under the "Shaded" visual style, or the "Wireframe" visual style, or the "Monochrome" visual style.
Is there some way to work with a "Translucent" visual style so that I can see the internals of my assembly as I'm placing parts, applying constraints, etc.?
im making a cnc milling machine and need to make some things to make. This is a clamp between the magazine and the barrle of a shotgun and i made the drawing in 2d to start whit and then used the EXTRUDE to make it inn to 3d.
As you can see on the top of the object there is no surface and the same goes for the buttom. How can i make a surface?
[URL]
how to extend a solid object. You can see at the picture that I attached what I mean and also I will try to explain. I draw a fence 1.5 m high. At one specific part of the yard I want the fence to be 2.0 m high. So I moved upper part (horisontal) of the fence to the height of 2.0 m. Now I want the 2 vertical poles to "extend" to that height. Now I can delete those poles and use extend command from the bottom and then use silce command. I was just wondering if their is a command that I can use to grab the pole as it is now and pull it up to the new height if that is possible without erasing it.
View 9 Replies View RelatedI'm trying to draw a solid object. I have the top and bottom base, and all I want is to loft that thing, but when I do, it only lofts the limits - it results in a hollow object.
View 7 Replies View RelatedI'm trying to make an image I have which has a solid background (and a few other details inside it) transparent? so I can still see behind the graphics in the image yet the background at the same time... I know I've seen it before where the image sort of floats above the background... But I don't know how to accomplish this in Photoshop.
View 8 Replies View RelatedI'm working on a project, and all of a sudden when I ad a outline line width to an object the outline seems transparent to me. I can get it to stop doing this with copying other objects in the scene that have a solid line around them, but as soon as I go back to the other items the transparent line width starts happening again.
View 2 Replies View RelatedCreating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View RelatedIs Autocad have a command to calculate the volume of a solid object? If so, it would come in handy at times.
View 1 Replies View RelatedI am trying to convert a mesh to solid in AutoCAD 2010 using the CONVTOSOLID command but I get this message . . .
'Mesh not converted because it is not closed or it self-intersects. Object cannot be converted.'
Is there another way of achieving this?
I have the 3d model of a ship, but it has no surfaces or solids, just lines. I want to create some solids based on those lines.
It's better if i attach the dwg to the post and explain what i want to do:
- in the file attached there are some lines marked with red and blue
- i want to create a solid/3dobject by extruding/lofting the red lines along the blue lines.
In the drawing only a few lines are colored, for better understanding. I tried with loft, but it only creates some surfaces. The point is that i need a solid or a 3d object.
sampla.dwg
I'm currently encountering issues when trying to shell a solid object (any). The command doesn't work for me.
View 1 Replies View RelatedIn other words, I have a green patterned background, and I want to add a transparent triangle (which should then be the green background by making it transparent) over a white layer. To sum it up, I want the triangle to be filled in with the green patterned background over the white layer. How do I do this?
View 6 Replies View RelatedI am in the process of designing a clear label for my aftershave and would like to have the text on a solid color panel be transparent so that the liquid is visible. I would also like to have an outline (Line) tracing the font. I've been doing some internet searches for "punched out" and "cutout" text and the like but this process is using two solid color layers.
As it stands now, I have a transparent background, the panel as one layer, and the text as another layer on top of the panel.
I came across a process for Illustrator but was hoping that it could be done in Photoshop as well since I have everything already setup in PS. I did try the method described for Illustrator but I couldn't get it to work in PS...not throwing out the high percentage of operator error on this one.
I'm having technical issues with Photoshop CC, it is displaying solid fill layers as transparent, even though they are showing up correctly as solid fill layers in the layers panel.
View 5 Replies View Related