im making a cnc milling machine and need to make some things to make. This is a clamp between the magazine and the barrle of a shotgun and i made the drawing in 2d to start whit and then used the EXTRUDE to make it inn to 3d.
As you can see on the top of the object there is no surface and the same goes for the buttom. How can i make a surface?
[URL]
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I have turbine rotor blade designed as per the aerodynamic considerations. The profile i obtained from the company is completely solid, I would like to make it hollow with a wall thickess of 5 mm. I tried if with the Shell feature of Inventor, and Since the profile of the blade is in different planes twisted in different angles, the Shell is not working very well. I have tried it with loft with different cross sections, but i am not getting a completely accurate profile. Is there any tool which automatically recognises the outside profile and will make the Inside hollow also in Inventor?
View 1 Replies View RelatedI need to make two parts act solid. That is, that they need to slide and react as if they were real instead of just going through eachother. In the assembly included, the "rotator" needs to rotate as it is pulled through the "rifled column (2)". The other constraints in the assembly are fine as is, but if I can make these parts react correctly, then the center pole and blade will rotate.
View 3 Replies View Relatedi would like to use 3d dwg files from the 50 wood joint library for cnc processing. Therefore i load a dwg file (like attached) into account and want to start editing the wireframe, but thats not possible. Furthermore I expected to be capable of producing a solid for further processing in a CAM software.
How can I edit and make the attached geometry a solid?
I am needing to make a frame for a machine as for demonstration purposes...as this is for presentation would you still recommend using the Frame Generator or would Solid Modelling tools be just as good
View 5 Replies View Relatedhow to extend a solid object. You can see at the picture that I attached what I mean and also I will try to explain. I draw a fence 1.5 m high. At one specific part of the yard I want the fence to be 2.0 m high. So I moved upper part (horisontal) of the fence to the height of 2.0 m. Now I want the 2 vertical poles to "extend" to that height. Now I can delete those poles and use extend command from the bottom and then use silce command. I was just wondering if their is a command that I can use to grab the pole as it is now and pull it up to the new height if that is possible without erasing it.
View 9 Replies View RelatedI'm trying to draw a solid object. I have the top and bottom base, and all I want is to loft that thing, but when I do, it only lofts the limits - it results in a hollow object.
View 7 Replies View RelatedCreating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View RelatedIs Autocad have a command to calculate the volume of a solid object? If so, it would come in handy at times.
View 1 Replies View RelatedI am currently working on an assembly and want to view it as an isometric view, but, I want to see parts behind a particular object. My question, Is there a way to change the transparency of one object without changing the effects of the other parts? I want to be able to see the front object as well as the one behind it.
View 3 Replies View RelatedI am trying to convert a mesh to solid in AutoCAD 2010 using the CONVTOSOLID command but I get this message . . .
'Mesh not converted because it is not closed or it self-intersects. Object cannot be converted.'
Is there another way of achieving this?
I have the 3d model of a ship, but it has no surfaces or solids, just lines. I want to create some solids based on those lines.
It's better if i attach the dwg to the post and explain what i want to do:
- in the file attached there are some lines marked with red and blue
- i want to create a solid/3dobject by extruding/lofting the red lines along the blue lines.
In the drawing only a few lines are colored, for better understanding. I tried with loft, but it only creates some surfaces. The point is that i need a solid or a 3d object.
sampla.dwg
I'm currently encountering issues when trying to shell a solid object (any). The command doesn't work for me.
View 1 Replies View RelatedIf I modify a 3D solid and it is left with two seperate pieces it is still one solid piece, even though there are two parts. My question is: What if only need one of those two sides? If I explode the object and delete the one side I cannot change the remaining object into a 3D solid. It remains as surface object.
How can make an object into a 3D solid after exploding it? I belive there is a simple command like union or some other but I can't remember.
I do have a problem on SPLIT feature. I cannot seem to apply SPLIT SOLID into an entity/object but, on the other object I am able to apply SPLIT SOLID.
Sketch created using MultiBody and would like to make use of "Make Components" to create an assembly as well as parts.
I have attach a zip file of the ipt. I am currently using Autodesk Inventor Suite 2012.
I can use SolidSelection.Item for 3D object's handles and but I can't take 3D object's volumes with SolidSelection.
Then I can put object 's handles(1EE) to a collection. Can I use SolidSelection to keep my 3D volumes values? All sub-structure of my program works with SolidSelection Object.
Volume Codes;
For Each tEnt In ThisDrawing.ModelSpace
If TypeOf tEnt Is Acad3DSolid Then
Dim tEntSolid As Acad3DSolid
Set tEntSolid = tEnt
tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume)
End If
Next
I can't match with returned result of these codes and SolidSelection.item(i)
For Each tEnt In ThisDrawing.ModelSpace
If TypeOf tEnt Is Acad3DSolid Then
Dim tEntSolid As Acad3DSolid
Set tEntSolid = tEnt
tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume)
[code]......
I drew a 3d shape using 3dpoly and I want to convert that drawing,which is now only a 3d sketch, into a solid.I have attached a picture of the lines sketch sulita.jpg.
View 9 Replies View RelatedI wrote a program that I can give a name automaticly for all 3d solid objects.
But I want to show a little box on isometric view every names with VBA codes.
How can I show 3D Solid object's name on isometric view?
I try to show on Attachment.
I am attempting to copy and paste a part of a drawing from AutoCAD 2011 into ms, Excel or Word. I am able to copy within a vport so my whole screen is not copied. My problem is only 2D objects show up when I paste. I tried different visual styles and colors but still cant get my solid objects to appear.
View 7 Replies View RelatedI cant seem to get the clean command to do anything, it asks whether i want
[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
so i type "L"
it says select object
i click the solid
it says [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] again...
How to convert 3D drawing drawn using the line in the 3D object / solid? Drawing is the image below and drawn using lines and polylines and I not use extrude options or other 3D options. [URL] .......
View 6 Replies View RelatedIm using auto cad 2013 and how i would go about making a 3d object using specific x,y,z coordinates.
I used the line tool with the exact coordinates i require. all the lines connected but don't know how it turns into a 3d object.
is there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies View RelatedHow to create a Circular Pattern of the Solid Object by VBA. I tried it by calculation Polar Transformations but was unsuccessful.
Then Rotated the complete Solid Object which changed original location. Is there any way i can Change the Angle and Mirror instead of Making circular pattern.
Can AutoCAD has the capability of calculating the weight of a solid object for a certain material just Solidworks can.
View 2 Replies View RelatedI've been trying to change the edge color for a 3D solid object but not able to.
I've tried using the function in Autocad but it just wont work.
Basically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
I'm trying to create a solid object that can be used for injection molding. My office has Inventor, but I'm only familiar with 3D Max. If I create the object with Nurbs in 3D Max, can I export it so that Inventor reads it as a solid object, and if so, how?
View 1 Replies View RelatedI want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies View RelatedSo I have a student who wants to put these lines in the object. Since it would be very difficult to make these lines enclosed and looking right is there anyway to put these lines in the object. I don't understand why Emboss works on letters but not lines. That is all letters are.
View 9 Replies View Related