How to convert 3D drawing drawn using the line in the 3D object / solid? Drawing is the image below and drawn using lines and polylines and I not use extrude options or other 3D options. [URL] .......
View 6 Replies
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I drew a 3d shape using 3dpoly and I want to convert that drawing,which is now only a 3d sketch, into a solid.I have attached a picture of the lines sketch sulita.jpg.
View 9 Replies View Relatedis there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies View RelatedI want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies View RelatedHow to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedWhenever i draw a new line, hatch etc - Autocad draws the object with a certain lineype. Then after i draw the line i have to manually click the line and set it's linetype to "By layer". It doesn't matter which layer i set as current, it never draws by layer, allways by this other linetype.
Using Cad 10 Architecture - But tried opening the file on other versions aswell, with the same result.
i thought i would make a new thread explaining myself a little better. im looking to try and convert my hand drawing to a cartoon / line art. URL....
View 9 Replies View RelatedWe are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
How shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use.
Why doesn't appear the trace of an object or line when i'm drawing it or moving it?
In Autocad 2005.
I'm wanting to do something seemingly very simple but I've never tried working with pictures before other than to resize or crop. How do I convert a simple picture to a line drawing?
View 3 Replies View RelatedWe are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
any other solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedIn Photoshop CS6, how to convert the background in the scan of a line drawing on white paper to line drawing on transparent ground? I used to be able to do this in CS3
View 1 Replies View RelatedI am using CS2.
I have a line drawing of a simple object that I would like to convert into a shape.
I have figured out how to cut the shape itself out of the original image using the magic wand select tool thing and altering the tolerance. So I have the cut-out shape on a transparent layer in a .psd file. All well and good.
I looked up "shapes" in the help center, and it says this:
"To convert type to shapes
When you convert type to shapes, the type layer is replaced by a layer with a vector mask. You can edit the vector mask and apply styles to the layer; however, you cannot edit characters in the layer as text."
It continues:
"Select a type layer, and choose Layer > Type > Convert To Shape".
Everything was going swimmingly untill that point - I go to the Layer menu - but "Type" is greyed out and therefore inaccessible.
I then did a search for "type layer" to find out what a type layer was - it says:
"About type layers:
After you create a type layer ...
tell me what a type layer is (I figure it has something to do with font, but I don't see how this relates to my line drawing), how to create one, or how to get my drawing into a type layer so I can convert it to a shape!
I must be missing something fundamental when trying to change a line from a solid line to a hidden or dashed line in Autocad 2000. I use the ltype command then load either Hidden, or dashed ISO,or both, and invariably the scale is way off in that I always end up with a still solid line, after using modify properties. After all that, every line I draw after that comes out dashed. Maybe I should fool with the layers? Is there a basic procedure I should follow here?
View 2 Replies View RelatedI imported a file from ai. as dxf. Now, I want to change Solid line into dashed line. I tried doing it with properties, checked its scale. But it is still not changing.
View 3 Replies View Relatedwhy is it when i cut and delete a line from an object, after the line is deleted, there is another line appear automatically , and i can not select the line itself. how do i keep the object from closing??
View 2 Replies View RelatedWe are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I have this chair in 3d but it consists of 3d faces and i can not convert all of them into surfaces or solids...only the faces that are on the same plane can be converted. Since the object is a little curved...i get the message"faces are not coplanar"...or something.
View 9 Replies View RelatedI have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. How to do this? I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
Is it possible to convert surface into solid in AutoCAD 2002?
For example, can I convert these five surfaces into a solid pyramid?
If yes, what is the step to do it?
We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
View 9 Replies View RelatedThen I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedIs there any way to convert a surface to solid?
View 4 Replies View RelatedSupposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
