Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 RepliesWe are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
How do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
I have autocad 2011.I am trying to get my autocad to snap to the closest line.
I draw a pline at a 45 degree angle. I press enter and I click the starting point again (in this instance the bottom point) and I draw another line near the other one, the nearest snap indicator shows up, but when I type "2" (units in Meters) and press "enter" the line is drawn where the cursor is and not along the 45 degree angle.
My goal is to get the second line to follow the first line with a different length.
I'm running Architecture 2013. When creating an elevation object from a 3D model, the hidden lines are not being removed. I've never seen this before, though I have been using Architecture and ADT for years. I've recently upgreaded from 2009 to 2013, and VOILA!
Hidden lines not removed from elevation and section objects. I've tried various tests, to no avail.....
As I move my cross hairs over an object in a drawing it wants to select or highlight the object without clicking on it. On detailed models/drawings it takes alot of time and is almost impossible to use. Is there a way to turn or toggle this function off?
View 2 Replies View RelatedMy Object Snap settings will not stay "set". Each day i have to reset the options i wish for each dwg i open up that day. also the settings do not stay set even when working on same dwg for several hours. Every couple hours i have to reset them to my options.
View 2 Replies View RelatedThe problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point. Is there a quick command or script that does this?
View 2 Replies View Relatedouse has started jumping across the drawing screen. snap is off
View 1 Replies View RelatedFor as long as I can remember, across all versions of Autocad, I've had problems picking the right item on the popup menu for object snap (shift-right click). It frequently picks the item below the intended one, i.e. it will pick Parallel rather than Perpendicular. Trying a second time works every time. This problem has been so consistent that I don't believe it is user error. The item is highlighted, after all. There is no way I'm repeatedly missing it. Is it possible to calibrate the mouse in Autocad?
View 9 Replies View RelatedObject Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
I would like the contour line colored to reflect the elevation it is depticting! I have successfully used surface properties - elevations - to create ranges, and to FILL color in between contours, but is there a workflow to color the contours themselves?
I also noticed, within the same dialogue box in surface properties, a contour pull down - but it doesn't have near the control to set elevation ranges, nor does actually effect the contour color.
I want to import a shapefile into acadmap; this file has contourlines, and in the attribute tables there also is the Attribute for the elevation of the repective line, noted as integer number
after import all lines are on elevation 0
how can I filter all those with same elevation attribute, change them to an AutoCAd object (polyline) and have them moved up to the respective elevation which can be read out from the attribute table?
I was given a file from a competetor (this is evil)
The file has coordinates in feet (x, y) but elevations (Z) in meters.
I need the contours intact (cant explode block and scale) to create a surface from.
The other part is this is a big file so anything by hand would be rediculous.
I need the final file where the x,y has stayed the same but the z has been adjusted to the correct foot elevation (scaled)
Civil 3D 2012 SP3
Of course with ACAD MAP (FDO Labels for example) or better with ACAD CIVIL : no problem !
But often I have to use a Standard AutoCAD ...
A lots of people have already asked for this routine :
But I search in this forums and some others and unfortunately I can't find any correct routine Full operational on ACAD 201X 32/64 bits
I have many 2D Plines with an Elevation : some Normal , some have been splined --> 1st problem
I would like to label them with :
- either a Block with ONE attribut : the elevation
- either a MText with a blank Mask behind
As you wish ...
Question : Size/Height of the Block or MText ?
Some 2D Plines are very long (2nd problem) so I would like a question like :
Label each Pline every xxxx Units ?
So on a Pline Contour of 2000 meters, I could have the elevation (Block or MText) every 50 meters ...
Of course I would like that the Block or Mtext will have to follow (rotation) the Pline (splined or not) where the label is inserted !
Is there a way for Civil3D to create/generate/extract a contour of a specific elevation such as 105.53 from an existing surface?
View 4 Replies View RelatedWhenever i draw a new line, hatch etc - Autocad draws the object with a certain lineype. Then after i draw the line i have to manually click the line and set it's linetype to "By layer". It doesn't matter which layer i set as current, it never draws by layer, allways by this other linetype.
Using Cad 10 Architecture - But tried opening the file on other versions aswell, with the same result.
How to convert 3D drawing drawn using the line in the 3D object / solid? Drawing is the image below and drawn using lines and polylines and I not use extrude options or other 3D options. [URL] .......
View 6 Replies View Related1. AutoCAD 2011, new user & new install. I’m going throught the tutorials and have lost ability to repeat past ability to do tasks. One being to highlight an object and then delete using the Delete key. Second example being lost is to left click a drawn line and then to hit delete. Is this a setup problem?
View 4 Replies View RelatedI have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
How shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use.
Why doesn't appear the trace of an object or line when i'm drawing it or moving it?
In Autocad 2005.
We have been trying to plot some 3D objects in our drawing with a hidden line. We need the drawing to not show the hidden 3D lines but to show the edge lines of the object to plot as a hidden line.
View 2 Replies View RelatedWe are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
any other solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
I made a 3D box shape in AutoCAD. I would like to draw a line on one of the surfaces of the box. Also I know you can use the the linear tool under Annotations to display dimensions of 2D lines. But I don't know how to do it so that it that shows the dimension on a vertical axis as shown in the picture below.
View 9 Replies View RelatedWe have this problem with nothing showing up in the properties tab when we select a line/object.
We have tried everything from here:
[URL]
But still can't get it work.
Is this more of a Windows issue rather than AutoCAD? We are running Windows 7/64.
Recently I've been working with a lot more projects that contain curved architectural features. It appears that I am unable to draw a line to an implied perpendicular point on an arc. I can draw a line to an implied point perpendicular to another line but not an arc. refer to attached images.
Image1 demonstrates the implied point perpendicular to a line.
Image2 demonstrates that there is no implied perpendiuclar point on the arc given by AutoCAD.
Image3 demonstrates that if the arc is manually extended, a point perpendicular to the arc does exist.
It seems like this should work.
Image1
Image2
Image3
I'm trying to snap one object to the other with vert snap.
It's trying to snap from the center of my object rather then the vert I am hovering over. In the Snap settings I have only "vertex" checked so it should snap to whatever vertex I hover over but no...This keeps up I'm going back to 2008 when all this worked fine.