I made a 3D box shape in AutoCAD. I would like to draw a line on one of the surfaces of the box. Also I know you can use the the linear tool under Annotations to display dimensions of 2D lines. But I don't know how to do it so that it that shows the dimension on a vertical axis as shown in the picture below.
View 9 RepliesI must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
how can i draw this red line in autocad, its an arc from point 1 to point 3 in spherical 4 side segment? point 1 to point 2 to point 3 to point 4 closing the segment at point 1 and point 4 (fused)
View 9 Replies View RelatedI'm sure this is a simple thing but it's driving me crazy. Every time I draw a line it gets erased as soon as I try to draw the next one.
View 7 Replies View RelatedI want to draw triangle in segment of polyline in segment direction.
I have target segment and center point of it:
Polyline line = ...
LineSegment3d centerSegment = line.GetLineSegmentAt(centerSegmentIndex);
Point3d centerPosition = centerSegment.MidPoint;
I can find direction of this segment:
Vector3d zaDirection = line.GetLineSegmentAt(centerSegmentIndex).Direction;
Next, I create list of points:
List<Point3d> points = new List<Point3d>();
points.Add(centerPosition);
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)));
points.Add(centerPosition.Add(new Vector3d(ZASize, -ZASize, 0)));
And draw it:
wd.Geometry.Polygon(new Point3dCollection(points.ToArray()));
Ok, I have triangle but... it's not in segment direction, it's X-direction.
I try to rotate it:
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)).RotateBy(0, zaDirection, centerPosition));
But it's not the same as I want.
How I can draw triangle by serment direction?
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
Whenever i draw a new line, hatch etc - Autocad draws the object with a certain lineype. Then after i draw the line i have to manually click the line and set it's linetype to "By layer". It doesn't matter which layer i set as current, it never draws by layer, allways by this other linetype.
Using Cad 10 Architecture - But tried opening the file on other versions aswell, with the same result.
How do I draw perpendicular from a line or object at a specific point? I know by holding shift and osnap perpendicular I can draw the line but I can not osnap to the exact point!
View 9 Replies View Relatedhow to draw 3d box in Dragging Using object arx.
View 2 Replies View RelatedIs it possible to draw a line with fixed ends. I want to draw a line, representing a pipe, which connects two tanks. Whenever I move one of the tanks I'd like the line automatically to adjust its coresponding end in such a way that the line aways will start from the one tank and end on the other. Is it possible that?
Another question, is there some option, such that whenever two line cross each other, one of the line automatically to go over the other. By this I want to show on the drawing that the two lines are not connected. Something like the following "sketch"
How to draw a line perpendicular on an arc at the a particular point?
I wanted to draw a line perpendicular to an arc at a particular point but couldn’t approach it. In this case, I need two snaps to work at the same time! To be perpendicular on the curve and at the same time to be snapped to the point!
How do you draw a line without the line length/angle showing as to go?
View 6 Replies View Relatedhow can i draw a line/arc inside a cell in ACADTable.
View 2 Replies View RelatedI want to drawn LINE by excel data to autocad 2010, I have excel file x,y and z coordiates.
I want to draw line to import excel data coordiates to autocad ?
What is the most efficient way to draw a line inclined by particular angle from another line?
I wanted to draw a line inclined by particular angle from another line but couldn’t get the best way to do that.
For example, in the screenshot below, I wanted to draw a line inclined by 60º from an existing line but couldn’t approach the best way to approach it.
How can I draw this line efficiently?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How to draw this object?
I want to draw an object similar to the dimension that contains two arrowheads with TWO “text dimension” to indicate the range each “steel bar” covers. This is important to indicate the range the two bars cover with the same dimension object.
Have a look on the screenshot below . The file is attached.
I'm doing a line drawn that is selected breakpoints..Such as the Software Corel Draw Software .I'm doing move draw line With Move Object.
View 3 Replies View RelatedI have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
I would like to know how to draw segment elbow 90 degrees ( segments are not equal ) and create Flat Pattern for each of the segments - using sheetmetal in Autodesk Inventor?
View 9 Replies View Related1. AutoCAD 2011, new user & new install. I’m going throught the tutorials and have lost ability to repeat past ability to do tasks. One being to highlight an object and then delete using the Delete key. Second example being lost is to left click a drawn line and then to hit delete. Is this a setup problem?
View 4 Replies View RelatedThe only way I know to remove the segment of this 3d object in between the orange lines is to slice on each orange line and select to keep both sides which is pretty tedious since I will need to do this every 3 feet over a 170 foot span....is there another easier way to do multiple mortar joints on a 3d object like this?
segment.gif
We have been trying to plot some 3D objects in our drawing with a hidden line. We need the drawing to not show the hidden 3D lines but to show the edge lines of the object to plot as a hidden line.
View 2 Replies View RelatedI have a subdivision plat that I'm working on with a curved lot line. When I label this particular lot line, Civil 3D labels it like it's two different segments. In other words, instead of labeling the line as a 100 foot long arc with a radius of 100 feet, it labels it as a 60 foot arc and a 40 foot arc. I can't figure out how to combine the two segments.
All of the lots lines were created from polyline objects, and there was no break in the original line work (nor is there any indication of a break in this location when I select it).
We are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
We have this problem with nothing showing up in the properties tab when we select a line/object.
We have tried everything from here:
[URL]
But still can't get it work.
Is this more of a Windows issue rather than AutoCAD? We are running Windows 7/64.
I'm trying to figure a "fast" algorithm to obtain the amount of material (in linear distance) between 2 points within an assembly i.e. if I draw a line between any two points P1 & P2 in an assembly, what is the length of this segment that goes through material and what is the length that goes trough empty space?
For now I'm creating a thin cylinder as a new part, place it with one end at P1 and the other end at P2, calculate the interference volume of this body with the rest of the assembly and divide this number by the total volume of the cylinder. but has some problems:
1. It is VERY slow, and I want to call this function lots of times.
3. Is not accurate due to the finite diameter of the cylinder.
2. If the assembly has some interferences, the result is wrong (accounting same volume more than once)
I derived in a part and I am trying to use a sketch from it in my new part.
I am trying to revolve my sketch and when I do I get this error.
I am using a English version, and I cant read chinese at all. Design doctor shows no errors, but this will not revolve. Tried Extruding and get the same error. When I try to revolve, it shows a preview of my part correctly, but when I click apply in the revolve dialog, that is when I get this error.
The files are attached and here is a video of my steps. In the zip file, the -M8.ipt needs the EOF marker moved all the way to the bottom.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013
I am getting "Undefined group code 440 for object on line 3222." when I try to load a DXF back into CAD.
View 1 Replies View RelatedIs there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedI have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
View 9 Replies View RelatedI am trying to create surface elevation labels along a polyline and I am having an issue with the label anchor point. I have created a line label style that uses a reference text to produce the elevation from a specified surface, however when I insert the label the default anchor point for the label is in the center of the line segment and that is where the reference text is taking the surface elevation. I am looking for the elevation of the surface at the start of each line segment, and I do not know how I can make it stop defaulting to the center of the line segment.
Attached is an overview of what my labels look like, where the anchor point is, and the layout properties within my label style. I am using C3D 2012.