How do I draw perpendicular from a line or object at a specific point? I know by holding shift and osnap perpendicular I can draw the line but I can not osnap to the exact point!
View 9 RepliesHow to draw a line perpendicular on an arc at the a particular point?
I wanted to draw a line perpendicular to an arc at a particular point but couldn’t approach it. In this case, I need two snaps to work at the same time! To be perpendicular on the curve and at the same time to be snapped to the point!
I have a curved path I imported into Illustrator, and I'd like to draw a line perpendicular to the curve at a particular point. I've searched google and this forum, but can't find any description of how to do it. Corel Draw has a button that lets you do this, so I'm hoping something similar exists in Illustrator...
i'm currently just calculating the angle at the point I want using the derivative, finding the angle, and then adding 90 degrees to it. But I need the line to be placed at a particular point, and the X/Y properties of the line are based on the ruler which isn't even in the center of the document (I want to position it relative to the artboard). As in, I just want to set the position of one endpoint of the line...
How to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies View Related I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
At center line I want to place a small perpendicular line in specific length and put their coordinate to excel sheet(export coordinates).
I have already two programs for this, one for placing objects on curve with specific length and 2nd for pick & export coordinates to excel or other type of file. but this is very lengthy process & need too big time. but I think it cab be done in a single command written in lisp.
I have a line which is at (0,0) and (2,2). I need to draw a perpendicular to this line from point(1,0).
View 6 Replies View RelatedIs it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies View RelatedI need to draw an ellipse at a specific point on a drawing.
i can calc the major and minor and i have a polar point of where it should be drawn.
i just need the code to draw the ellipse.
How do i draw line at specific angle. if i have the length on the x axis and angle, when i do @.25<45 the line becomes .25 in length i need the x dim to be .25 @ 45 degrees. as shown in the picture
View 9 Replies View RelatedI'd like to place a point at a specific "Z" level on a line. The line is not perpendicular to the x~y plane. On the attached .dwg, say @ z+.750 on one of the angled lines on the "constraints" layer.
0699 Cadtutuor.dwg
When trying to draw a line and choose a starting point, autocad decides that this is wrong and start the line in a different place. I've turned of autosnap and autotrack but this dosen't work.
What is it that I've forgot to turn off?
why do not draw the line between ptm1 and pt3?
(defun c:PUNTOM (/ pt1 pt2 pt3) (setq pt1 (getpoint "
Initial point : ")) (setq pt2 (getpoint "
Final point : ")) (setq pt3 (getpoint "
Offset : "))(setq ptm1 (mid (pt1 pt2))) (command "_line" pt1 pt2 "")(command "_line" ptm1 pt3) (princ));;;;;;;(defun mid (p1 p2) (list (/ (+ (car p1) (car p2)) 2.0) (/ (+ (cadr p1) (cadr p2)) 2.0) ));;;;;;;;
I'm new to Autocad and have problem drawing a perpendicular bisector . I have an oblique line and want to draw its perpendicular bisector . Is there an easy way to do that?
View 7 Replies View Relatedi have a rectangle and a spline.to proceed my work i want to make this rectangle perpendicular to the spline.i tried the commands 'rotate3d', 'rotate'..but the problem is i dont know the angle of helix and when i try to annotate, it says the lines are parallel. is there any easy way for doing this without knowing the angle?
View 6 Replies View RelatedI have an alignment going up the center of a draw. I'd like to extract cross sections of this alignment and existing ground. What is a good way to do this?
I don't do cross sections very often, so when I need one, I draw a second alignment perpendicular to the first and profile that alignment to give me a bare bones cross section. I'd like to do these cross sections on a given interval, and at every change in direction. How should I go about it?
Whenever i draw a new line, hatch etc - Autocad draws the object with a certain lineype. Then after i draw the line i have to manually click the line and set it's linetype to "By layer". It doesn't matter which layer i set as current, it never draws by layer, allways by this other linetype.
Using Cad 10 Architecture - But tried opening the file on other versions aswell, with the same result.
I made a 3D box shape in AutoCAD. I would like to draw a line on one of the surfaces of the box. Also I know you can use the the linear tool under Annotations to display dimensions of 2D lines. But I don't know how to do it so that it that shows the dimension on a vertical axis as shown in the picture below.
View 9 Replies View RelatedI'm doing a line drawn that is selected breakpoints..Such as the Software Corel Draw Software .I'm doing move draw line With Move Object.
View 3 Replies View RelatedACAD LT 2009, Win XP Lately a feature I am used to seeing has quit.Basically when you hover over a point of a line, a little cross mark appears and you can drag out a dashed line from that point which can be snapped to another object. Handy for finding perpendicular intersections. Whatever this is it no longer works. How do I get it back?
View 2 Replies View RelatedHow shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use.
I have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
I need do draw perpendicular lines at fixed intervals to a path. The path may be either open or closed. This is used as a symbol on maps to denote a depression with the perpendicular stubs pointing in the direction of the depression. Ideally, I would like the perpendicular lines to draw themselves as I draw the path.
View 4 Replies View RelatedIs there a simple way for drawing lines or plines perpendicular off a given line which is not horizontal or perpendicular itself?
Bildschirmfoto 2013-08-07 um 14.30.17.jpg
Is there a way for drawing that yellow line in the drawing with a given length directly off the ending of the white line? Without using SNAPANG or the like?
I have a drawn a line at any angle say 39.43. I want to draw a line from this line @ perpendicular from this line. How to draw this.
View 9 Replies View RelatedRecently I've been working with a lot more projects that contain curved architectural features. It appears that I am unable to draw a line to an implied perpendicular point on an arc. I can draw a line to an implied point perpendicular to another line but not an arc. refer to attached images.
Image1 demonstrates the implied point perpendicular to a line.
Image2 demonstrates that there is no implied perpendiuclar point on the arc given by AutoCAD.
Image3 demonstrates that if the arc is manually extended, a point perpendicular to the arc does exist.
It seems like this should work.
Image1
Image2
Image3
I am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedI am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies View RelatedI have included a picture of the drawing. I could draw the 45 radius Arc that goes from 0 degree to 90 degree. The other Arcs somehow i just can't.
View 9 Replies View RelatedHow can I draw tiles in a specific rectangle? Say I have a rectangle of 10x20. I have tiles of 3x8. I want to fill the rectangle from bottom left with the tiles so they crop at the edges of the rectangle.
View 9 Replies View Related