AutoCad :: How To Draw Specific Arcs
May 10, 2013I have included a picture of the drawing. I could draw the 45 radius Arc that goes from 0 degree to 90 degree. The other Arcs somehow i just can't.
View 9 Replies
ADVERTISEMENT
AutoCad :: Draw Tiles In A Specific Rectangle?
May 13, 2012How can I draw tiles in a specific rectangle? Say I have a rectangle of 10x20. I have tiles of 3x8. I want to fill the rectangle from bottom left with the tiles so they crop at the edges of the rectangle.
View 9 Replies View RelatedAutoCad 2D :: How To Draw Line At Specific Angle
Oct 12, 2008How do i draw line at specific angle. if i have the length on the x axis and angle, when i do @.25<45 the line becomes .25 in length i need the x dim to be .25 @ 45 degrees. as shown in the picture
View 9 Replies View RelatedAutoCad 2D :: Draw Lines With Specific Interior Angles Between Them?
Nov 23, 2013How can I draw lines with specific interior angles between them?
For example, if I draw my first line then, I want to draw the second one but with an interior angle of 100deg between them, what can I do?
AutoCad :: Draw Order - Select All Objects On A Specific Layer?
Jun 20, 2007I am using the command Draw Order and would like to use the Quick Select so that I can select all objects on a specific layer. How do I use the Quick Select in conjuction with the Draw Order command?
View 8 Replies View RelatedAutoCad 2D :: Draw Perpendicular From A Line / Object At Specific Point
Feb 24, 2010How do I draw perpendicular from a line or object at a specific point? I know by holding shift and osnap perpendicular I can draw the line but I can not osnap to the exact point!
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Draw An Ellipse At A Specific Point On A Drawing
Mar 18, 2008I need to draw an ellipse at a specific point on a drawing.
i can calc the major and minor and i have a polar point of where it should be drawn.
i just need the code to draw the ellipse.
Photoshop :: How To Draw/Select By Specific Dimension Size
Jul 13, 20051. I want to draw boxes of specific dimensions, i.e., 5"x7" within a canvass that is bigger (i.e., letterhead size) than that.
2. I also want to know what size a specific image is. I checked help (PS7) and it says if I press alt and right click on the image information (which I assume is the size dimensions shown on the status bar) it will give me the image size; but it only gives me the canvass size. Am I doing something wrong?
3. Not sure if this is the place to ask, but can anyone tell me where to go to learn how to create emoticons?
GIMP :: Draw Parallel Lines With Specific Distance
Nov 1, 2012How do you draw parallel lines with a specific distance between them? I was gonna use this function for futuristic artwork. Do you have to use the grid for this or is there another way?
PS. is there a plugin maybe?
AutoCAD Visual LISP / AutoLISP :: Change A Specific Attribute From Specific Block To Specific Value
Dec 7, 2011I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
AutoCad :: Make Specific Command To Start At Specific Layers
Nov 27, 2013Im using Autocad Structural Detailing 2013. Its is possible to make specific command to start at specific layers?
EX: Breakline ,by default start at "LAYER 88".
Polyline ,by default start at "LAYER 150".
AutoCAD LT :: Arcs That Don't Arc
Apr 25, 2013we used AutoCad LT 98 & hasn't changed when opening the same files in LT 2014. All curved lines (arcs) that occur in a recently-opened file look like two straight lines with an angle at the mid-point, so that from a distance they still resemble an arc but not at all when zoomed in. When clicking on the control points, it goes to looking like a proper arc, but the change doesn't hold after the file is saved and reopened. Is there a program-wide setting to change, or do the properties of each arc need to be changed individually?
View 3 Replies View RelatedAutoCad 3D :: Intersections Of 2 Arcs?
Jul 25, 20121st let me preface this with the fact that I know zilch, nada, nil about solid modeling. But I think the easiest way to accomplish what I'm trying to do is thru solid modeling and export the end result as (3D) polyline
What I have is 2 intersecting arcs with varying radii and ucs values. I'm guessing these could turned into regions and then subtract 1 from the other in order to find a list of intersecting points or maybe a splined pline. Or maybe they could be joined. Either way, if I DXFOUT the solids in R12 format, they become plines
I have access to R14 thru 2012
AutoCAD Map 3D :: Text And Arcs Not To Scale
Jul 9, 2013Using AutoCAD Map 3D 2012 Im exporting a few subdivisions to MapInfo after doing my steps on a MAPEXPORT command to create a .TAB or .MIF / .MID which are the steps do below.
MAPEXPORT --> select format_ .TAB or .MIF ---> select my drawing manually ----> do my coordinate conversion -----> DONE..
When in MAPINFO and ready to open / import the exported .TAB it opens and places the drawings (subdivisions) in its correct coordinate I gave it, but the TEXT and ARC / CIRCLES do not come in to scale at all they are extremely large to a point where they can't be seen till I do a zoom all.
AutoCAD LT :: How To Trim Intersection Arcs
Jan 5, 2013Whenever I try to trim two intersection arcs who have the same bending direction and similar radius, casue it is extremely hard to click on the parts that need to be trimmed off. See attached pic for reference.
View 2 Replies View RelatedAutoCAD .NET :: Convert Arcs To Polylines?
Jun 25, 2011I've got ObjectIds of a bunch of arcs that I need to convert to polylines for further processing.
I was thinking of using the COM interface and sending the PEDIT command and converting the arcs.
The only problem is I don't know of a way to put the objectids into a selection set, then call the pedit command and use the previous selection.
AutoCAD .NET :: Connected Lines And Arcs
Dec 24, 2013Using VB.NET
How to draw connected line arc line arc line and so on, given some points formatted in a file like this
easting northing radius
0 0
10 10 200.00
12 10 150.00
30 20 60.00
50 30 50.00
50 43 60.00
1640.42 1104.30 50.00
1770.20 1100.62 100.00
1850.00 1085.18 100.00
2002.61 1141.46
the output will be like this :
line arc line arc line arc line arc line arc line arc line arc line arc line
AutoCad 2D :: Remove All Arcs From Polylines
Nov 25, 2013Any plug-ins out there that focus solely on this?
View 2 Replies View RelatedAutoCad :: Loft Two Rectangles Using Arcs
Feb 8, 2011I want to loft two rectangles using arc as a path , but i cant , 1st i cant draw the arc in 3d so i draw it in "Front" view , then i cant loft the rectangles using that arc as an path -"The selected entities are not valid" , maybe because i draw the arc in "Front"(bottom left), but i cant draw it in 3d?!! Here it is some screen shot:
View 0 Replies View RelatedAutoCad 3D :: Arcs Not Smooth When Rendering?
Jun 16, 2012i have a problem when rendering 3d objects having arcs. the arc in the rendered photo is not smooth and round !
View 5 Replies View RelatedAutoCad :: How To Join 3 Lines / 2 Arcs
Jun 28, 20133 lines. 2 arcs. All coplanar, all meet end-to-end.
I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.
I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.
The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.
AutoCad 2D :: Arcs And Circles Are Rough
May 7, 2008Recently I created an elevation which included a door with leaded glass. When I originally drew the arcs and circles they were symmetrical and smooth, but now they are rough and ugly.
(See attachment)
AutoCAD Inventor :: Tangent Dimensioning Of Arcs
Feb 3, 2012This is probably a simple one, but when I dimension from an edge to the tangent of a radius or circle. It always snaps to the center. How do I get the dimension to snap to the tangent point?
View 9 Replies View RelatedAutoCAD 2013 :: Convert Polylines Into ARCs
May 6, 2013I want to turn this shape on the left, into one like the one on the right... i.e., not so many points.
I basically want to convert the polylines into arcs or something. i can do this by redrawing, thats no problem, but this is a very simple drawing compared to what i normally have to deal with, this is just an example.
AutoCAD 2013 :: Exporting Arcs And Circles
Dec 5, 2012I am exporting to Adobe and AplhaCam, when ever I send DXF or DWG files, the Circles or arcs are segmented.
How do I make not so segmented?
AutoCAD 2013 :: How To Convert Arcs To Splines
Feb 12, 2013How can I convert arcs to splines.
View 5 Replies View RelatedAutoCAD 2010 :: Converting Splines Into Arcs
Sep 23, 2011I have a bugging problem.
I usually use Inventor to create a model from customer supplied blueprints, and then use the model to get the 2D geometry into
AutoCAD for further processing.
Now, unfortunately Inventor has a pitiful 2D drawing method, where circles and arcs that do not lie exactly on the plane end up as a spline.
They are true arcs and circles and should be true arcs and circles on the 2D view, but aren't.
What I would like to do is turn them into one.
Is there any command or method to do that?
I was hoping that Overkill would work ..... it doesn't.
AutoCAD Civil 3D :: Converting Arcs To Polylines?
May 10, 2012I have some polylines that mark the edge of roadway and around the curves there are arcs in the linework. How do I turn the polyline with arcs in it into a polyline with vertices, say, every .5' or so along the curve and turn the curve into a polyline? I tried the pedit and using decurve but it doesn't work well.
Using C3D 2012
AutoCad 2D :: Arcs Converted To Lines When Mirroring
May 31, 2012The arcs in the object i have drawn gets converted to lines when i mirror the object.
View 3 Replies View RelatedAutoCad 2D :: Making Multiple Continuous Arcs
Aug 6, 2013The building I am working on is the shape of a jelly bean. The exterior glazing will be segmented and we are trying to make the building as dimensionally uniform as possible. IE 5'-0" Curtain Wall units. So each arc length needs to be perfectly divisible by 5'-0" and the transitions from one arc to the next must occur at a tangent point.
Eventually we will be developing the building in Revit 2013 but for now we are in ACAD 2013.
AutoCad :: Extrude Some Joined Polylines / Arcs?
May 29, 2012I am trying to extrude some joined polylines, arcs etc. The problem is some of them are extruding as a solid, which is what I want and some are extruding as a surface of the profile.
View 8 Replies View Related