AutoCAD .NET :: Connected Lines And Arcs

Dec 24, 2013

Using VB.NET

How to draw connected line arc line arc line and so on, given some points formatted in a file like this

easting        northing             radius

0                 0
10               10                      200.00
12               10                      150.00
30               20                      60.00
50               30                      50.00
50               43                      60.00
1640.42      1104.30             50.00
1770.20      1100.62            100.00
1850.00      1085.18            100.00
2002.61      1141.46

the output will be like this :

line arc line arc line arc line arc line arc line arc line arc line arc line

View 1 Replies


ADVERTISEMENT

AutoCAD 2010 :: Dynamic Block Rotate Part And Stretch Arcs To Stay Connected

Jun 18, 2012

I have a block that I would like make dynamic.  It is a fishhook arrow for a roundabout traffic sign.  I would like to rotate the head to various angles, and have the body of the arrow adjust.  I already have the ability to stretch the two end points in their direction, and rotate the head, but the curved part of the arrow body needs to adjust for the new head location.  I tried dynamic stretch, but it would not attach to the rotate dimension.  How do I get these arcs to stretch along their radii and associate the end arc points to the near end of arrow head?

I had one thought of using multipe arcs so that they would overlap more or less as rotated, but this is a pretty crude workaround.

LT, C3D 2005 - 2014
XP, Vista, 7

View 7 Replies View Related

AutoCad 2D :: How To Make Poly Lines From Connected Single Lines

Apr 27, 2011

This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...

pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc

My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.

It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.

View 6 Replies View Related

AutoCad :: How To Join 3 Lines / 2 Arcs

Jun 28, 2013

3 lines. 2 arcs. All coplanar, all meet end-to-end.

I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.

I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.

The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.

View 9 Replies View Related

AutoCad 2D :: Arcs Converted To Lines When Mirroring

May 31, 2012

The arcs in the object i have drawn gets converted to lines when i mirror the object.

View 3 Replies View Related

AutoCAD LT :: Unable To Add Lines Or Arcs To Older Drawing

Jul 9, 2012

The user is unable to add any sort of Lines, Arcs, etc to an existing file. However not all files behave this away. It seems like there must be some sort of a lock or a security item in place to prevent changes being made.

View 2 Replies View Related

AutoCAD 2013 :: How To Convert Arcs Into Several Straight Lines

Oct 30, 2013

I have a giant polyline containing a mix of arcs and straight segments, and I would like to convert all of the arcs into a series of small, straight lines so that I can use the polyline with a plug-in I wrote to use the polyline as a selection polygon.

Someone mentioned something about WMFOUT and WMFIN but that gave me some pretty weird, wobbly lines as a result and plus it didn't scale things the same when I used WMFIN.

View 3 Replies View Related

AutoCad :: Joining Lines / Ellipse Arcs And Circle Arc?

Jul 13, 2007

how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?

PS: I'm using autoCAD 2006 z.54.10 version

View 7 Replies View Related

AutoCad :: Text Made Of Objects (Lines And Arcs)

Sep 6, 2012

I am looking for a way to use objects created from lines and arcs as text because of a machine that will not read text. The objects look like letters and numbers. I am wondering if there is a way to create a text style, library or whatever with the created "text". There can be hundreds of characters on a single drawing so importing and aligning and placing each object 1 at a time is very slow and painstaking.

View 9 Replies View Related

AutoCad :: Converting Multiple Lines / Arcs Into Plines?

Oct 18, 2011

I've been trying to figure out how to do this. I have a file with 41 drawings, and 7650 objects. and i want all the lines, arcs and circles to be turned into polylines. Now the Mpedit command doesnt really do it for me.

Command: MPEdit
Select objects: Specify opposite corner: 4632 found, 10 groups
Select objects:
divide by zero

This is what happens when i write MPEdit, mark everything in my drawing and press enter. Now i also tried marking a line, using select similar, and fixing it that way. but i get the "divide by zero" error aswell.

View 2 Replies View Related

AutoCad :: Command Or LISP To Delete Lines Not Connected At Both Ends?

Nov 11, 2012

I'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.

View 3 Replies View Related

AutoCAD Architecture :: Adding Spaces To A Plan Just In Lines And Arcs?

Dec 13, 2012

I've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.

It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.

View 4 Replies View Related

AutoCAD .NET :: How To Create Lightweight Polyline Using Existing Lines And Arcs

Mar 29, 2013

Using VB.NET, how to create a new polyline out of existing lines and arcs? I am converting existing VBA code into VB.NET, developing in AutoCAD 2010 using VS Professional and I just stumbled into this road block.

Without using programming code, this task can be accomplished via AutoCAD command by typing the PE command, selecting the JOIN option and then selecting any lines or arcs which should be combined to form a polyline.

Using programming code, however, I am quite stumped on this task. I have been able to successfully create the lines and arcs which should form the polyline, and they are all connected as well so they would form a connected polyline; I simply do not know how to proceed from here.

View 6 Replies View Related

AutoCAD 2013 :: How To Crop Image Path For Cropping Is Made Of Lines And Arcs

May 6, 2013

I need to crop image in autocad, path for croping is made of lines and arcs and one picture needs to be croped with circle. Is it possible to crop this way?

View 4 Replies View Related

Illustrator :: How To Export To DXF With Lines And Arcs

Jan 9, 2014

so in the old illustrator i was able to export to a dxf with lines and arcs and autocad options and now there is no longer a prompt for such thing and after exporting it turns a circle into little straight lines instead of arcs....

View 1 Replies View Related

CorelDRAW X5 :: Connected Lines Into A Single Shape

Jun 14, 2010

I'm drawing an object (a crown) from separate individual lines that I've brought togther to form the drawing.  Now it's complete, I want to now somehow get all the lines (nodes) to fuse together to fomr a single closed object or large shape so I can then fill it.

View 14 Replies View Related

Xara :: How To Draw A Series Of Straight Connected Lines

Nov 10, 2011

I assume there's some button combination I'm missing? All I know is I can connect a series of freehand lines no problem, but the straight line tool is not consistent operation with the freehand tool.

View 4 Replies View Related

AutoCAD LT :: Arcs That Don't Arc

Apr 25, 2013

we used AutoCad LT 98 & hasn't changed when opening the same files in LT 2014.  All curved lines (arcs) that occur in a recently-opened file look like two straight lines with an angle at the mid-point, so that from a distance they still resemble an arc but not at all when zoomed in.  When clicking on the control points, it goes to looking like a proper arc, but the change doesn't hold after the file is saved and reopened. Is there a program-wide setting to change, or do the properties of each arc need to be changed individually?

View 3 Replies View Related

AutoCAD Map 3D :: Download Connected WMS Images

Jan 17, 2013

If it is possible to download images to my hard drive so that I have connected to a WMS server to obtain?  Basically I am wanting to be able to send an autocad drawing with an aerial image to someone that does not have autocad map, and wanted to know how I can download the image so that I can send it to the person with the autocad drawing so that they can see the same aerial image that i do. 

View 6 Replies View Related

AutoCAD .NET :: Find All Connected Entities?

Nov 6, 2013

I have a requirement to find all connected entities on a given line of a plant P&ID. In other words given a certain line or reference point the requirement is to 'walk the line' and list off all entities (with certain attributes and in order) that are connected on a line.

Now not having any experience with underlying object models and API's, whether A) this is possible B) which object model to use - I'm a bit confused as to which one to use.

View 1 Replies View Related

AutoCad 3D :: Intersections Of 2 Arcs?

Jul 25, 2012

1st let me preface this with the fact that I know zilch, nada, nil about solid modeling. But I think the easiest way to accomplish what I'm trying to do is thru solid modeling and export the end result as (3D) polyline

What I have is 2 intersecting arcs with varying radii and ucs values. I'm guessing these could turned into regions and then subtract 1 from the other in order to find a list of intersecting points or maybe a splined pline. Or maybe they could be joined. Either way, if I DXFOUT the solids in R12 format, they become plines

I have access to R14 thru 2012

View 9 Replies View Related

AutoCAD Map 3D :: Plotting Images And FDO Connected Points

May 8, 2012

I'm plotting a map that is supposed to show a background of either aerial imagery or the USGS topographic maps. I have points for wells from the state database that has a tabular join to an excel spreadsheet.  The well points are color coded for samping data from the spreadsheet.  I want the color-coded points with the well ID number in a plot (paper or .PDF).  

The imagery/map underlay are both MapIInserted, versus FDO Raster, but I've put them into a layer in Display Manager.

What's happening is that some of the points plot & some of the labels plot, but not all.  Also, some of the text for the labels is missing the front end of text and some is missing the tail end.

I've gone as far as trying to set the white background of the USGS quads "transparent" and plotting with transparency thinking that the points were "under" the images.  Not the case.  

I'm only getting about 40% of the points.... WHY???????  I've spent the better part of a day on this and getting extremely frustrated.  I've tried turning on/off hardware acceleration.  I'm working with a "non-compliant" graphics card - think this is the issue?

C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1

View 9 Replies View Related

AutoCAD Map 3D :: Selected Acdb Entities Not Connected

Jun 21, 2012

I am editing a shape file and have encountered a warning which reads "The selected acdb entities are not connected". How to check which entity this warning is trying to connect to?

View 4 Replies View Related

AutoCAD Map 3D :: Data Connected Image Disappears

Mar 18, 2011

I accessed an aerial image through data connect, adjust the the georeferencing, etc.  Image comes in fine and no problems...

One day, I re-open the same file and the data-connected image is gone!

I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."

View 5 Replies View Related

AutoCAD Map 3D :: Text And Arcs Not To Scale

Jul 9, 2013

Using AutoCAD Map 3D 2012 Im exporting a few subdivisions to MapInfo after doing my steps on a MAPEXPORT command to create a .TAB or .MIF / .MID which are the steps do below.

 MAPEXPORT --> select format_ .TAB or .MIF ---> select my drawing manually  ----> do my coordinate conversion -----> DONE..

 When in MAPINFO and ready to open / import the exported .TAB it opens and places the drawings (subdivisions) in its correct coordinate I gave it, but the TEXT and ARC / CIRCLES do not come in to scale at all they are extremely large to a point where they can't be seen till I do a zoom all.

View 2 Replies View Related

AutoCAD LT :: How To Trim Intersection Arcs

Jan 5, 2013

Whenever I try to trim two intersection arcs who have the same bending direction and similar radius, casue it is extremely hard to click on the parts that need to be trimmed off. See attached pic for reference.

View 2 Replies View Related

AutoCAD .NET :: Convert Arcs To Polylines?

Jun 25, 2011

I've got ObjectIds of a bunch of arcs that I need to convert to polylines for further processing.

I was thinking of using the COM interface and sending the PEDIT command and converting the arcs.

The only problem is I don't know of a way to put the objectids into a selection set, then call the pedit command and use the previous selection.

View 4 Replies View Related

AutoCad 2D :: Remove All Arcs From Polylines

Nov 25, 2013

Any plug-ins out there that focus solely on this?

View 2 Replies View Related

AutoCad :: Loft Two Rectangles Using Arcs

Feb 8, 2011

I want to loft two rectangles using arc as a path , but i cant , 1st i cant draw the arc in 3d so i draw it in "Front" view , then i cant loft the rectangles using that arc as an path -"The selected entities are not valid" , maybe because i draw the arc in "Front"(bottom left), but i cant draw it in 3d?!! Here it is some screen shot:

View 0 Replies View Related

AutoCad 3D :: Arcs Not Smooth When Rendering?

Jun 16, 2012

i have a problem when rendering 3d objects having arcs. the arc in the rendered photo is not smooth and round !

View 5 Replies View Related

AutoCad :: How To Draw Specific Arcs

May 10, 2013

I have included a picture of the drawing. I could draw the 45 radius Arc that goes from 0 degree to 90 degree. The other Arcs somehow i just can't.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved