AutoCad 2D :: How To Make Poly Lines From Connected Single Lines
Apr 27, 2011
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
I'm drawing an object (a crown) from separate individual lines that I've brought togther to form the drawing. Now it's complete, I want to now somehow get all the lines (nodes) to fuse together to fomr a single closed object or large shape so I can then fill it.
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
What should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
I'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.
This is a closed polyline, how can I delete the edge? Is there some sub object selection mode for polylines?
sub_objects.jpg
This was the initial situation or problem, two control points lying on eachother, instead of dragging the edge and removing the extra polyline, is there a way to collapse or weld the overlapping elements?
I assume there's some button combination I'm missing? All I know is I can connect a series of freehand lines no problem, but the straight line tool is not consistent operation with the freehand tool.
I am trying to build a 3d model and I am requirng to draw 2d sketches in the side view e.g right but all the happens is that the polylines do not go at the angle I need them at they jsut go parallel to the bottom. Also how do i create like a plane which I can draw a flat sketch on which i can set an offset from my first sketch?
We recently upgraded to AutoCAD Architecture 2013 from Architecture 2011 and am having all sorts of intermittent issues with walls showing up as single lines in x-refs (even though the file being refrenced has been brought into 2013 and shows correctly when opened by itself). We are also having intermittent issues with the plans and walls themselfs showing as a single line. I need assistance on strightening this out as we have several jobs pending construction that are all having this issue in incosestant areas.
I have a block which includes some Multiple lines attributes.
Now I don't want them to be multiple lines any more.
How can I change them to single line attribute?
In the block editor, the "Multiple lines" in the properties palette is gray out. I have create single line attribute and replace the multiple line attributes one by one.
Why don't make the Multiple lines property editable? This problem is since Multiple line attribute first time introduced.
Interesting thing is single line attributes can easily changed to multiple line attributes through the properties palette!
How do I create multiple lines of text in a single layer. Everytime I finish with a line and want to go to the next, I hit 'Enter', but that completes the text. If I click on the layer image again, then it creates another layer.
So basically if I have 10 lines of text, I end up with 10 layers of text as well. Needless to say, this becomes to much trouble if I have to center each line of text and add blending options to 10 layers instead of one.
I have a table in an Access 2010 database which has 130 rows of records. Each row is assigned a drawing file name field and then the 6 attributes for the title block of each drawing. I am wanting a routine that will open a set of drawings, the set matching each drawing file name field record and populate the attributes in the drawing title block with the corresponding records in that row from the database table.
I have seen where multiple blocks in one drawing can be populated with an attached database but I want to populate several drawings with a single database that has several records. One row of records for each drawing.
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013 Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
I have a shape created by three hexagons and they are abutted along edges. I would like to combine them into a single object and in doing so reduce the lines so that the abutted lines become one line. the reason is that currently they are processed twice along each abutted line by my laser.
I can use combine but this still leaves them as discrete editable shapes in node editor, so clearly the double lines are still there.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
