Civil 3D 2013.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
I am receiving an invalid input message when trying to create a curve between two lines. My drawing units are set to architectural. The problem is summarized as follows:
1- In Lines/Curves menu, select curve between two lines.
2-Select first tangent
3- Select second tangent
4-Select radius option
5- Enter 8'6"
6- After entering the radius I receive an invalid input message.
7- But if I enter the radius as 102 (102 inches) the curve is created without any problem.
I have only cogo points, numbered and with description. I have no figures.
How can I create them using points secuences ?
Can I use some C3d tool to build a line with the points included into a group builded with some query ?
( That is, create a line with points from 1001 to 1050, only those wiht description like PT* and using and interval of three - (1001, 1004, 1007, 1009) . )
Civil 3D (2013)
I have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).
1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?
2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked. What Commands should I use in the Command Line to specify these points to form a parcel?
I just upgraded to Civil3D 2014 and Windows 8. When I create a TIN surface using a DEM file no contour lines are displayed. Points are processed and triangles are created and can be displayed but no contour lines. Contour line layers are set to display in the style file.
View 9 Replies View RelatedImagine I have a standard naming convention for my assemblies elements Sometimes I want to show some feature lines and sometimes other.
Can I define a "style" for this ?
Civil 3D (2013)
So I received a whole bunch of contours from an architect. They are lines and arc. big sweeping arcs. Whats the best and fastest way to create a good surface. I can change them globally to a polyline but I need to add vertices like every 5 or 10 feet to get a good surface. Can I select multiple feature lines (after converted) to add vertices?
View 3 Replies View RelatedI need to create points with surface elevations along sample lines. The points need to represent the verticies one would see in the section editor. I've attached an image of my section editor for one of my sample lines. I need to create points that represent these 24 verticies along this sample line and do so for the rest of my sample lines as well. Is there an automated process to create these points?
View 1 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedIs there a way to extend multiple lines along a curve, keeping the same distance between them? Like the stretch feature but able to stretch around a pre-drawn curve.
I've attached the drawing I'm working on. I would like to connect the top left portion to the bottom right portion with the lines that extend out of each using a curved sweep.
Why the lines sometimes get angular when I draw a circle/curve? How can I make them round?
View 8 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I'm trying to create the magic effect found in this image: [URL]
I tried creating an ellipse and filling it in with semi-transparent brush and use the dents tool on it but its just not... WAVY enough. Is there a plugin or way to add more lines to the lines/curve tool? That would be VERY useful at all times so I can make custom waves/do more things with it.
I frequently use the lines/curve tool for filling in large items on the documents (maps) which I update. In the past, I have had no trouble doing this, but I now find that the lines no longer merge into one another, but overlap. I get the same effect when using the paintbrush tool. It is probably something that I am doing incorrectly, but blowed if I know what.
View 7 Replies View RelatedI've been wondering, is there some trick to starting 2 Bezier lines at the same start- and end-points? Or do I have to eyeball it? Can I reactivate an old, previously selected line after something else has been selected? Is it possible to keep several lines selected in separate layers apart from each other?
View 1 Replies View RelatedI'm trying to make a curve that follows a path that changes direction. I've tried to carry the zigzag effect accross line using the compound path option, but the curve double in on themselves and don't make a continuous line.
View 1 Replies View RelatedThere is a brick-like pattern on a geological cross section I could draw this in manually but any way to do it automatically so there is a uniform horizontal distance between vertical separators? I tried creating a brick type swatch, but this created horizontal lines which did not follow the curve of the stratum.
View 12 Replies View RelatedWith all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View Relatedi am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies View RelatedI know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies View RelatedI want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies View RelatedIs there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
View 6 Replies View RelatedI am new to Inventor after using Unigraphics for a while and finding the modelling side very similar so no problems there. the problems are starting when i am producing drawings.
I am trying to manually break a dimension extension line around an inserted symbol ( surface finish symbol) and can't figure this out. I have noticed that Inventor automatically break dimensions round other dimensions but is there a way to add a manual break?
Also is there a way to break a center-line round dimension text? i have added a picture with the problem.
In both model and paper space, rectangles with corners filleted look fine. However, the filleted curved corners are not joined with straight lines once it's exported/plotted to PDF. I have to zoom in very closely to see this, so it won't be a big problem for actual printing. But I can't figure out why the lines are broken on PDF when they are well joined in both model and paper space.
I tried changing PDF quality, plot style, and anything I can think of, but to no avail.
Autocad 2012 on MAC, 10.7.2 with Acrobat X.
what is the difference between a line and a poly line and when should I use a line and when should I use a polyline?
View 6 Replies View Related