I created a path with Curves with the pen tool.filled it in with a color light blue.than I use the paint bucket to change it to dark blue.This is when the curved lines become jagged, not smooth, uneven.
i've drawn a car's blueprint in autocad and tried to plot to see the result how the picture would look like if i tried to print it, but what i got was pretty horrible:
[URL]
Lines are very very jagged, the picture just looks bad. Viewres is at 20000. Why lines are not smooth?
My 2013 AutoCAD file needs to "regen" after just scrolling in and out once. I can't do anything because the lines are disconnected and jagged all of a sudden. This started a few hours ago after I drew a spiral staircase and blocked it. I noticed the lines were all of a sudden not connecting while drawing the stairs though. Is there a command that I might have accidently typed to change some type of format? or unit set up? I have been working on this file since September and this problem has never occured. The lines look fine from far away, but when you zoom in there's a clear separation. My snaps are on and they seem to be aligning when I click, but when you zoom in they're not touching at all. I've been googling for soooo long and can't find an answer. My units are 1/8" (Architectural) and when I check the dimension between the two lines it says it's 0".
I'm in a drawing file and I have some straight lines that when I'm a little zoomed out they look all jagged, but as I us my mouse scroll wheel to zoom in, the closer in I zoom the jagged line segment start to come together into one continuous line again.
Not all lines look jagged just some.
is there a setvar for this or a video card setting or something?
I am designing a site that uses a lot of irregular shapes, but cant seem to get angled lines to show up smooth. They are coming out very jagged. Any idea how to smooth the lines out? Tips for Photoshop or Illustrator would be great. Thanks!
BTW I don't just want 45 degree angles, but all kinds of various angles.
I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
I've been using GIMP for a few years (at beginner skill level). Ok, so I want to take this image (1st pic) and resize it to print on a tshirt. I downloaded the upsize plugin and upsized it. Thing is, it's now got jagged lines all over the place (2nd pic)
I've tried:
1. selection to path, then use stroke
2. blur image, then use curves from the colours menu
3. using the magic selection tool with feathering
none of these got it right.
Attached File(s) ar drone.jpg (8.37K) Number of downloads: 11 AR Drone white.jpg (160.69K) Number of downloads: 10
I asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
Why is it sometimes a clipping mask produces jagged lines? I know if there's a dark background and a light one sitting on top of it, then this happens. is there a solution to clearing this out when applying a mask?? You can see in the screenshot I've circled where you see the jagged lines and in the layers palette you can see the clipping mask object.
I just bought a Cintiq 24HD and tested it in Photoshop CS5. Unfortunately the lines are jagged. (I'm using the brushtool and on my wacom intous 3 everything was fine.) This only appears in PS, Painttool Sai is fine and has great line quality.
At first I thought it might be the second monitor, as this was mentioned in forums, but I moved and unplugged it and nothing happend. I tried other solutions as well like unabeling windows tablet components etc.
I am making revision clouds on some record drawings. They come out all peachy, but when I save the file and reopen it, all of the wonderful little clouds change to jagged straight lines.
I am using Autocad 2000. When I view a 3D object from, say, a top view, I would like lines that would normally be hidden to appear as a dashed lines rather than simply disappearing. Otherwise, it's not possible to use a 3D model to produce a standard shop drawing. Without hidden lines appearing properly (not as solid but as dashed!) there is too much detail that cannot be seen. I have tried playing with many different settings and variables to no avail.
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I have an outline of a graphic that was extreemly jagged. Im using a plotter to cut it out and its just way complex and tiny of a cut for the machine to do. Is there a way to have Illustrator maybe smooth those out by removing every other point or something?
I am using AutoCAD Plant 3D 2012 and working with the P&ID portion of the software. I created a block (to represent insulation with electric heat tracing) with multiple lines using multiple settings. All of the lines are on layer 0, the line weight is set to by layer. All of the lines have a linetype of by layer except one line which I need to be hidden. This block appears correctly on my screen, but when I print, the hidden line prints continuous.
My brain is exhausted and I think this is just a setting somewhere I can not seem to locate.
2d simple circle... I would like to define a circle using hidden lines. I also would like to have the hidden lines extend passed the circle by .25 of an in. I would also like to define the center of the circle aesthetically rather than just draw these hidden lines in.
maybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
I need hidden lines in my drawings for the shop floor and the pictures below is the problem. It shows the hidden lines in the veiwport in paper layout but when I print preview or print i does not show them at all. windows 7 autocad 2007.
I'm opening a drawing created in AutoCAD 2008, which is plotting hidden arcs as solid lines. Straight hidden lines are dashed as normal. I've attached both the paperspace view and the plot preview to show what I mean. The outer radius is showing as dashed in paperspace view, but appears as a solid line when plotted. The straight line leading to it is dashed in both views.
Im trying to plot a 3D object in Autocad 2009 but can't remove the hidden lines. The "Hide" command removes the appropriate lines in the viewport and in the print preview but the print-out still appears with all the lines.
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
