i've drawn a car's blueprint in autocad and tried to plot to see the result how the picture would look like if i tried to print it, but what i got was pretty horrible:
[URL]
Lines are very very jagged, the picture just looks bad. Viewres is at 20000. Why lines are not smooth?
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
After designing a simple 3d model, I can only get it to print right with 2d wireframe. Unfortunately, I don't want all the lines showing up, just the ones on top. I tried all the views, but only 2d wireframe works. Need lines, not concept or realistic shades.
View 9 Replies View Relatedi am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
My 2013 AutoCAD file needs to "regen" after just scrolling in and out once. I can't do anything because the lines are disconnected and jagged all of a sudden. This started a few hours ago after I drew a spiral staircase and blocked it. I noticed the lines were all of a sudden not connecting while drawing the stairs though. Is there a command that I might have accidently typed to change some type of format? or unit set up? I have been working on this file since September and this problem has never occured. The lines look fine from far away, but when you zoom in there's a clear separation. My snaps are on and they seem to be aligning when I click, but when you zoom in they're not touching at all. I've been googling for soooo long and can't find an answer. My units are 1/8" (Architectural) and when I check the dimension between the two lines it says it's 0".
View 9 Replies View RelatedI'm in a drawing file and I have some straight lines that when I'm a little zoomed out they look all jagged, but as I us my mouse scroll wheel to zoom in, the closer in I zoom the jagged line segment start to come together into one continuous line again.
Not all lines look jagged just some.
is there a setvar for this or a video card setting or something?
I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replies View RelatedHow do you get rid of jagged lines in objects and text when you rotate them.
Anti aliasing is checked already and im not stuck on pixel preview.
When i burn a screen it comes out in my image
How do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies View RelatedI am designing a site that uses a lot of irregular shapes, but cant seem to get angled lines to show up smooth. They are coming out very jagged. Any idea how to smooth the lines out? Tips for Photoshop or Illustrator would be great. Thanks!
BTW I don't just want 45 degree angles, but all kinds of various angles.
I've been using GIMP for a few years (at beginner skill level). Ok, so I want to take this image (1st pic) and resize it to print on a tshirt. I downloaded the upsize plugin and upsized it. Thing is, it's now got jagged lines all over the place (2nd pic)
I've tried:
1. selection to path, then use stroke
2. blur image, then use curves from the colours menu
3. using the magic selection tool with feathering
none of these got it right.
Attached File(s) ar drone.jpg (8.37K)
Number of downloads: 11 AR Drone white.jpg (160.69K)
Number of downloads: 10
I asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
View 10 Replies View RelatedI am using a Mac, photoshop CS5
I created a path with Curves with the pen tool.filled it in with a color light blue.than I use the paint bucket to change it to dark blue.This is when the curved lines become jagged, not smooth, uneven.
When I drag out a circle, or use the node to curve the corners of a rectangle, the line isn't smooth. It looks like it's slightly jagged.
I'm trying to create a drawing which features the rounded edge of a playing card, with no luck. It simply doesn't look good.
Why is it sometimes a clipping mask produces jagged lines? I know if there's a dark background and a light one sitting on top of it, then this happens. is there a solution to clearing this out when applying a mask?? You can see in the screenshot I've circled where you see the jagged lines and in the layers palette you can see the clipping mask object.
View 37 Replies View RelatedSetup: Windows 7, CS5, CIntiq 24HD
I just bought a Cintiq 24HD and tested it in Photoshop CS5. Unfortunately the lines are jagged. (I'm using the brushtool and on my wacom intous 3 everything was fine.) This only appears in PS, Painttool Sai is fine and has great line quality.
At first I thought it might be the second monitor, as this was mentioned in forums, but I moved and unplugged it and nothing happend. I tried other solutions as well like unabeling windows tablet components etc.
Im trying to plot my drawing from AutoCad 2012 - DWG to PDF format. The problem I have encountered is that when the pdf is created, it has some of the lines in grey which they werent in AutoCad whatsoever. When I zoom into the lines on the pdf, these lines turn black as should be and appear normal. why this is happening and how I can create a PDF where the lines will stay black.
View 9 Replies View RelatedI'm opening a drawing created in AutoCAD 2008, which is plotting hidden arcs as solid lines. Straight hidden lines are dashed as normal. I've attached both the paperspace view and the plot preview to show what I mean. The outer radius is showing as dashed in paperspace view, but appears as a solid line when plotted. The straight line leading to it is dashed in both views.
View 4 Replies View RelatedIn hiden lines configuration, when I am plotting my drawing, the tangent lines of 3D cylinders (this is a pipes drawing) are missing. I have tried many options to solve that problem: paper plot , pdf plot, high pdf resolution plot, small size drawing plot, changed the thickness of the lines, change the color of the lines, plot with other computers... I did not find any solution and I have to send my drawings to a customer. In any configurations, the lines appears but others disappears. Even in the preview plot, lines are missing.
View 9 Replies View RelatedIm trying to plot a 3D object in Autocad 2009 but can't remove the hidden lines. The "Hide" command removes the appropriate lines in the viewport and in the print preview but the print-out still appears with all the lines.
View 1 Replies View RelatedOnly happens on angled or curved lines like this.
Why does it do that? And how do I change it to all black lines?
I am making revision clouds on some record drawings. They come out all peachy, but when I save the file and reopen it, all of the wonderful little clouds change to jagged straight lines.
View 5 Replies View RelatedI have a drawing that has xref's that some of the xref do not plot.
Import the xref it will not plot.
Insert the xref and explosed it and it will not plot.
I have check the layers that everything is on and they are set right to plot.
Never ran into these problem before working 20 years this Autodesk.
We recently got a couple new computers and now any gray line or gray hatch plots out pixilated. Even when I make a PDF the anything gray comes out pixilated. The old machines in the office plot fine, I just have not been able to find a setting to change on the new computers.
View 7 Replies View RelatedI am using autocad 2013 on Mac and plotting to hp designjet 510. Lines are always missing when I print especially medium to thin lines or hidden lines or for example hatch tile lines. I use the plotter also on a pc and there are no problems at all. I changed the thickness of my lines in ctb and still have lines missing. I change percision to 1 and same thing. If I print draft, normal or best I still have problems. I know how to spool and use in built memory on pc but can not find something similar on the mac and dont know if that will work, as i printed same drawings from pc. It seems that when there are close lines together or dense lines in an area, it just skips them.
View 9 Replies View RelatedIm making a shop drawing and it's already finished, when i tried to plot it in pdf or in plotter the other lines are not visible. Visual style control i tried all the things but still some other lines that drawn in 3d are blurred or not shown in the layout.
View 2 Replies View RelatedWhen I plot directly to a plotter or to a PDF file from paper space, some of the 3d pipe model will fade out along the pipe line. It happens to some of the lines, not all. I have re-drawn the pipes and drawn them using different UCS orientations. No change. I changed the layer color, changed the tessellation, line weight. Can this problem be related to the display driver, either software or video card? I have the latest drivers. ACAD ver. 11, nvidia quatro fx-3800 card.
View 1 Replies View RelatedI am finding that my DWF files sent to the plotter are plotting with the linework being heavier than the same file sent directly to our plotter. These are just lines that should plot with a narrow width (ie walls on a floor plan) but they seem to be about twice the width and hence look "darker". Is there a setting that I am missing or some other way to get the lines to plot out thinner? Also, TTF fonts plot thicker in DWF. I've tried the various options in the DWF viewer when sending to the plotter, but none seem to work.
View 6 Replies View RelatedI have a client who updated to AutoCAD Arch 2014 and now is having trouble with his grey lines printing pixilated.
He is using the same .ctb file from 2013 (moved up from 2012) also his pc3 file (from 2012). When he moved to 2013 he had this issue and went back to his 2012 pc3 and everything was working fine again.
So when he had the issue in 2014 he started using the 2012 pc3 file. But this time - no change.
I have a 3D drawing I created in AutoCAD 2014 64bit that is not printing properly. When you look at a print preview everything shows up and looks like it should print properly. However, when I print parts of lines are missing. Example, I have a rectangle and only half of it prints. Only two sheets out of eight do not print properly and all started as the same template. I have tried everything as follows:
Checked the layers were set to plot. Made sure the lines were not on defpoints. Moved all the items that do not print properly to the front. I am not using a ctb or stb file.
I have purged. I have audited. I have tried copying to a new drawing and creating my viewports again. I tried changing the quality from Normal to Maximum. I tried printing to a printer, to Adobe PDF, to CutePDF, to DWGtoPDF.pc3, and to PDF995. All of which gave me slightly different areas missing.
Computer:
Lenovo 7518D7U
Intel Core i3-2120 CPU @ 3.30GHz
4GB installed memory (3.83GB usable)
64bit system
Windows 7 Professional
Intel HD Graphics 2000