I'm in a drawing file and I have some straight lines that when I'm a little zoomed out they look all jagged, but as I us my mouse scroll wheel to zoom in, the closer in I zoom the jagged line segment start to come together into one continuous line again.
Not all lines look jagged just some.
is there a setvar for this or a video card setting or something?
I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I am making revision clouds on some record drawings. They come out all peachy, but when I save the file and reopen it, all of the wonderful little clouds change to jagged straight lines.
View 5 Replies View RelatedMy 2013 AutoCAD file needs to "regen" after just scrolling in and out once. I can't do anything because the lines are disconnected and jagged all of a sudden. This started a few hours ago after I drew a spiral staircase and blocked it. I noticed the lines were all of a sudden not connecting while drawing the stairs though. Is there a command that I might have accidently typed to change some type of format? or unit set up? I have been working on this file since September and this problem has never occured. The lines look fine from far away, but when you zoom in there's a clear separation. My snaps are on and they seem to be aligning when I click, but when you zoom in they're not touching at all. I've been googling for soooo long and can't find an answer. My units are 1/8" (Architectural) and when I check the dimension between the two lines it says it's 0".
View 9 Replies View RelatedI have received some electrical drawings that i'm making some alterations to. When i try to draw a line between fittings it just disappears. I'm not very experienced with auto cad and only really use it to alter drawings for final designs.
View 4 Replies View RelatedI have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedI am currently using AutoCAD 2010. I'm placing some length dimensions on partial sections of a circle and the arc dimension comes straight out from the chosen points as a dimension of a flat line does. I would like it to look like an angular dimension without having to use a text override. Is there any way to change that to where the placed dimension lines follows the edges of the section instead of coming straight out?
View 1 Replies View RelatedIs there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View RelatedI used to work with older versions of autocad where i just draw a line and extend it by grabbing the vertexes of it. But in 2012 when i draw a line to anothers end point it welds the vertexes and if i want to move it the original line moves strangely with it.
I just want all my lines to be sepperate unless i tell it otherwise...
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedIn both model and paper space, rectangles with corners filleted look fine. However, the filleted curved corners are not joined with straight lines once it's exported/plotted to PDF. I have to zoom in very closely to see this, so it won't be a big problem for actual printing. But I can't figure out why the lines are broken on PDF when they are well joined in both model and paper space.
I tried changing PDF quality, plot style, and anything I can think of, but to no avail.
Autocad 2012 on MAC, 10.7.2 with Acrobat X.
For some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies View Relatedi've drawn a car's blueprint in autocad and tried to plot to see the result how the picture would look like if i tried to print it, but what i got was pretty horrible:
[URL]
Lines are very very jagged, the picture just looks bad. Viewres is at 20000. Why lines are not smooth?
I am using Ortho Mode F8 on. This has been giving me perfect lines on screen. Now for some reason i have kinks in almost all my straight lines. I am sure i have hit some setting. Also I have lived it with so long I cannot use undo.
View 5 Replies View RelatedVersion: Autocad 2013
I have a problem drawing straight lines. Normally, like everyone, I will start from any given point and the line i wish to draw will snap to 0, 90 or 180 degrees. However there is now no snapping and no straight lines.
I have tried resetting SNAPANG to 0 (it is already set to 0) and this works for maybe the next 3 lines but then I am back to square one and cannot draw a straight line without constantly having to reset SNAPANG.
I've tried resetting USC to world. I've also tried changing PLAN to view and world.
I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
I have a giant polyline containing a mix of arcs and straight segments, and I would like to convert all of the arcs into a series of small, straight lines so that I can use the polyline with a plug-in I wrote to use the polyline as a selection polygon.
Someone mentioned something about WMFOUT and WMFIN but that gave me some pretty weird, wobbly lines as a result and plus it didn't scale things the same when I used WMFIN.
I'm suffering to draw a circle connect with a arc and 2 straight lines for almost an hour ago.
View 9 Replies View RelatedHow do you get rid of jagged lines in objects and text when you rotate them.
Anti aliasing is checked already and im not stuck on pixel preview.
When i burn a screen it comes out in my image
I am really struggling to get this dynamic block working - It's a plan view on the flight of steps and I would like to space the risers equally between the bottom and top nosing. I was trying to use array but the value (tread going) stays the same... So I need something thath would work just like divide command.
Eventually I need a block with different tread numbers which will be just a matter of creating a few visibility states
I am designing a site that uses a lot of irregular shapes, but cant seem to get angled lines to show up smooth. They are coming out very jagged. Any idea how to smooth the lines out? Tips for Photoshop or Illustrator would be great. Thanks!
BTW I don't just want 45 degree angles, but all kinds of various angles.
Total buffoon when it comes to getting GIMP to do what I want to do. I'm just practicing with making maps, black lines on a white background, and I've run into some issues I'm wondering if I can get rectified.
1) For whatever reason, the line weight of everything has shifted throughout the file, ending with some lines lighter and grayer than others. Is there a way I can get GIMP to trace all the lines in a uniform black, with uniform thickness?
2) I have tried locking the white background, but often when I select and move my black lines, if I don't click in just the right spot it moves the white background instead, which is really, reeeaaaly aggravating. How Do I get that background to be completely untouchable?
3) In trying to colour the image, I've run into problems with their being a white outline between the colour and the black lines. I think I need to sharpen the image or somesuch? How can one correct this issue?
4) Is there anyway to convert the black dotted lines of the paths tools into straight black lines, in regards to an older file? If not, is there an easy way to trace them?
5) I find the scale too tends to make my image too jagged. I want to take a section of my map, move it too another file and enlarge it to do detail work - what's the best way to do this in order to have a clear image?
6) Any way to translate an image from a MErcator Projection ot a Winkell-Trippel projection, one that works on a Mac?
I'm seeing a very strange behaviour with the routing though. In the first picture you can see both connection points are lined up in the y plane (measuring 0mm). However in the second picture you can see the route inventor choose for me which is strange. It shows the path moving in the "y" direction before returning in the same direction at the next connection point. I've plenty of room for all bends and piping (I'm using ANSI Schd40 1.5NB - Welded ends). I've tried doing the route manually then connecting the top horizontal section but it again wants to throw an offset or two in there when there is no need.
View 9 Replies View RelatedI am trying to import the coordinates for an airfoil into Autocad 2011.
I tried the command "spline" and paste the coordinates and "pline" + paste; the result consists of two straight, collinear lines.That's not going to fly.
I tried to set the "units" in meters and the precision to 0.000000 thinking the values were too small and had been rounded which lead to the lack of curvature but the result was the same; then I reduced the number of points but to no use.
I've been using GIMP for a few years (at beginner skill level). Ok, so I want to take this image (1st pic) and resize it to print on a tshirt. I downloaded the upsize plugin and upsized it. Thing is, it's now got jagged lines all over the place (2nd pic)
I've tried:
1. selection to path, then use stroke
2. blur image, then use curves from the colours menu
3. using the magic selection tool with feathering
none of these got it right.
Attached File(s) ar drone.jpg (8.37K)
Number of downloads: 11 AR Drone white.jpg (160.69K)
Number of downloads: 10
I asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
View 10 Replies View RelatedI am using a Mac, photoshop CS5
I created a path with Curves with the pen tool.filled it in with a color light blue.than I use the paint bucket to change it to dark blue.This is when the curved lines become jagged, not smooth, uneven.
When I drag out a circle, or use the node to curve the corners of a rectangle, the line isn't smooth. It looks like it's slightly jagged.
I'm trying to create a drawing which features the rounded edge of a playing card, with no luck. It simply doesn't look good.
Why is it sometimes a clipping mask produces jagged lines? I know if there's a dark background and a light one sitting on top of it, then this happens. is there a solution to clearing this out when applying a mask?? You can see in the screenshot I've circled where you see the jagged lines and in the layers palette you can see the clipping mask object.
View 37 Replies View Related