AutoCAD 2010 :: (2012) Disable Welding Lines Together?
Aug 1, 2013
I used to work with older versions of autocad where i just draw a line and extend it by grabbing the vertexes of it. But in 2012 when i draw a line to anothers end point it welds the vertexes and if i want to move it the original line moves strangely with it.
I just want all my lines to be sepperate unless i tell it otherwise...
View 2 Replies
ADVERTISEMENT
Nov 20, 2011
how to disable F1 in autocad 2012. How to do this in 2012 version. The F1 key doesn't appear in the CUI under keyboard shortcuts. My internet connection goes off and on and when it's off hitting the F1 key freezes my computer. so I need to disable it.
View 4 Replies
View Related
Oct 3, 2013
I'm in a drawing file and I have some straight lines that when I'm a little zoomed out they look all jagged, but as I us my mouse scroll wheel to zoom in, the closer in I zoom the jagged line segment start to come together into one continuous line again.
Not all lines look jagged just some.
is there a setvar for this or a video card setting or something?
View 4 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Jul 1, 2012
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
View 2 Replies
View Related
Jun 10, 2010
Is there a way to disable the Viewing of DST files in the Recent Documents Pull down so that only DWG files are shown?
View 9 Replies
View Related
May 23, 2012
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
View 3 Replies
View Related
Jun 27, 2012
In the earlier versions of acad the "ctrl-w" toggled object snap tracking on or off, but in 2012 it is changed to Selection Cycling on or off. This is quite irritating, because I got used to toggle object snap tracking with it and still automatically use it for that purpose. But I tried my best in the user interface to find it and change it or even disable it. But can't seem to find it anywhere or change it for that matter.
View 6 Replies
View Related
Jun 1, 2010
how I can disable the feature that highlights external references when they are selected in the xref manager. When large drawings are referenced (and many of them), selecting references in the xref manager takes a lot of wasted time. It seems like each xref needs to regen just to select it in the manager. I know which referenced drawings I want to select and I don't need the visual clues, so I'd like to dump that feature if at all possible.
View 9 Replies
View Related
Apr 30, 2010
Is there a way to either remove or disable the InfoCenter in 2011? It appears to be installed differently than 2010.
View 5 Replies
View Related
Apr 25, 2012
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
View 1 Replies
View Related
Apr 23, 2012
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
View 2 Replies
View Related
Sep 19, 2012
Is there a system variable that disable the "Rename and Renumber Sheet" dialogue box from appearing when double clicking on layout tab of current drawing which is part of sheet set?
I used to be able to just double click on a layout tab and change it. This dialogue box can't seem to edit it if the drawing is open. We use the layout the tab as current revision of drawing.
I know I accidentally click on yes before when it asked me if I want to use the dialogue box to edit layout tabs but can't seem to find anything on how to disable it.
View 1 Replies
View Related
May 23, 2011
I don't need or want the drag and drop (DROPGEOM) command. I never use it because it is much slower than simply using the move command or grips. But some times when I am going faster than the computer I accidentally do it and then have to wait while it moves the object and then wait while I use undo to move it back. It can take a really long time if I accidentally move a large xref. So is there some way to turn off drag and drop of autocad entities?
View 9 Replies
View Related
Nov 30, 2011
I am completely new to AutoCAD. I have been given a 2D DXF file with the design of an ion source. I have removed large parts of the design as I only need to electrode shapes.
I need to import the electrodes as a 2D DXF into my code to run simulations with them. However...
The code can read layers, and it searches for a closed loop within a layer and uses that to shape its electrodes. So I have isolated each electrode and saved them.The issue I'm having is the code finds no closed loops. Further investigation let me to the close, fillet, and boundary commands. Which I assumed would do the trick. However after a number of hours I am no closer to my goal.
I have isolated the problem to be linking a semi-circle to 2 lines. Because if I remove the semi-circle and replace with a straight line code will happily detect a closed loop. I have converted the entire thing into 1 polyline, and then to make sure its closed I have used the boundary command to create a polyline outline of the shape.
Even then, it is apparently not a closed loop. I was wondering if there is a glaringly obvious mistake I am making here, or if it comes down to resolution within the code. I'm looking into part 2
View 6 Replies
View Related
Jun 11, 2010
how I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.
View 6 Replies
View Related
Feb 16, 2012
I have a weldment assembly. It is a subassembly under a main assembly. In the 2D drawing of this main assembly, I tried to indicate the welding symbols for the subassembly assembly. The "Get Weld Symbol" is grey out.
How can I indicate welding symbol in the 2D drawing?
View 9 Replies
View Related
Jan 7, 2014
I have been toying with the welding aspect today and cannot figure our how to glue two parts together the way I want.
What I have is two pcs of 1.5" SQ tube (from content center) one with the face butted up against the side of the other. The weld will show on the top and bottom (straight sections) but will not fill the edges where the radius's from the tubing is (are?).
Inventor 2014.
View 5 Replies
View Related
May 7, 2013
I have a simple welding assembly: a plate and a cylinder (boss).The boss has a through-hole of 0.3125.The plate has a hole of 0.332.The boss is welded to the plate with the holes being concentric.
I tried to perform a machining operation by creating a sketch, projecting the geometry of the holes, and creating a threaded hole at the centerpoint projected.
The thread size I had selected was 3/8-16, and this is where I run into the issue. When modeled, a tapped 3/8-16 hole measured 0.307 (which I assume is the threads minor diameter). Obviously, 0.307 is smaller than the two concentric holes and Inventor is unable to create the tapped hole.
According to the tapped drill size chart found in any machinist reference, 0.312 is the required drilled hole diameter to tap a 3/8-16 hole. Am I missing something as how to create this tapped hole after welding in Inventor?
I know I could make the holes smaller on the Plate ans Boss, but then they would not accurately depict what is being made in our shop.
View 4 Replies
View Related
Mar 24, 2011
Who can tell me if Break lines in Inventor 2012 will be constrainable? I mean come on... All the new fancy stuff Inventor gets every year is great but when will the simple things get done?
View 9 Replies
View Related
Nov 28, 2011
I'm using autocad for mac. I've just saved a pdf in illustrator as an autocad dwg and opened it in autocad. It shows up but is not visible in my paperspace.
I've made sure it's on in the viewport. I've even tried to plot from modelspace but the lines don't show up in the plot. They are visible in the modelspace. They have all imported on the same layer, though some are different colour - some of them do show up, but not many.
View 2 Replies
View Related
Oct 29, 2013
I just tried the weldment in 2014 and welding bead looks plain, like a simple chamfer. Is there any way to make it looks more realistic like 2012?
View 7 Replies
View Related
Apr 13, 2006
Just about to take the first plunge in the pool of IV10 welding environment.
My question is: How do you make drawings for your different welding stages? When making my acquaintace with welding environment, I have encountered following scenarios:
I would like to make a drawing of an individual part from assembly, with preparations visible. This can be done by choosing preparations-state of a weldment assembly, followed by choosing a part from a pull down-menu. However, parts list still refers to whole assembly whereas I need only that one part. No worries, I’ll just hide those I don’t need.
Machining-stage produces a drawing where all previous weldment stages are visible as well, including preparations and weldings. Drawing used for machining the welded structure shows a lot of things that doesn’t need to be there, such as grooves. Empty grooves even, if I didn’t bother to define the actual weld beads there. I suppose this is as designed, but looking the assembly with the machinist’s eyes who would only see filled grooves, I would like the ability to choose if I want those stages to show or not. Again, parts list shows every part of an assembly. Guy who does the machining requires only the assembly level information.
I imagine that deriving the welded assembly would solve some of the issues.
View 3 Replies
View Related
Oct 26, 2011
I've create drawing in model, after design I arrange it in layout tab. Once after finish, I want to print it but in print preview there are some lines show up direct to bottom right of paper. I look into drawing, there are not lines, I check there are no layer turn off
View 1 Replies
View Related
Jan 8, 2013
I am looking for a way to add a welding symbol to an existing fillet weld. When I am creating a fillet weld, I get a chance to create a welding symbol based on the fillet weld size.
If this is not done when the weld is created, there is no way to add this notation. I don't have the "Create Welding Symbol" checkbox when editing an existing weld. The only solution is to delete the weld and recreate it.
I am trying to link the welds in the iam with the weld notes in the idw.
View 1 Replies
View Related
Apr 17, 2012
I opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
View 6 Replies
View Related
Aug 27, 2012
I have this odd problem that when i want to do welds on a assembly, the machinng (holes) disappear. So i cannot put welding between a pipe and a hole made in a weldment.!
View 9 Replies
View Related
Nov 17, 2013
how can i make a thread feature in machining environment after welding operation?
View 1 Replies
View Related
Jul 8, 2013
The second line of fields for text are missing for one half of the welding symbols - See attached picture. my paint scrawling.
View 2 Replies
View Related
Nov 15, 2013
it's possible to export informations stated in "tailing note box" from all welding symbols? The reason why I'd like to do it...it's because each weld in the drawing has his own number and I'd like to be able to work with these weld numbers in MS excel. It means I'd like to be able to export all the weld numbers and also to change these weld numbers in the drawing via MS excel.
View 1 Replies
View Related
Mar 3, 2013
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies
View Related