AutoCAD 2010 :: Install 2012 And LT 2012 On Same Computer?

Mar 29, 2012

Is this supported by Autodesk, and will installing both products create any issues?

View 3 Replies


ADVERTISEMENT

AutoCAD 2010 :: Can't Work On Computer During PUBLISH LT 2012

May 15, 2013

Don't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..

Windows 7 PRO
Autocad LT 2012

View 9 Replies View Related

AutoCAD 2010 :: 2012 Will Not Install On Windows 8

Oct 11, 2012

I've downloaded it several times, but it seems it just will not install. 

heres the log:

2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===

[Code].....

View 2 Replies View Related

AutoCAD 2013 :: Can 2014 And 2012 Be Installed On Same Computer

Dec 11, 2013

I am running ACAD 2012 & Civil3d 2012 and would like to install ACAD 2014 to start playing around with the software. Are there issues with running both versions on the same computer?

View 3 Replies View Related

AutoCAD Civil 3D :: Object Enabler Won't Install For 2012

Nov 9, 2012

I've been having issues recently installing Object Enabler for AutoCAD Civil 3D 2012 on a few machines. I downloaded the installer from the AutoDesk website, but when running,  it comes up and says it can't find any install of Civil 3D 2012..

Currently have AutoCAD Civil 3D 2010 and it's object enabler installed... Also have AutoCAD Civil 3D 2012 installed but can't get the OE to install for it. Running the 64bit shows nothing to install to, and the 32 bit installation only shows an option for "Language Pack".

View 4 Replies View Related

AutoCAD Architecture :: Can't Get 2012 To Install On Windows 7 32bit

Jan 8, 2013

I am getting a message:

"the system cannot open the device or file specified".

C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi

i then search  *.msi file and got another message:

microsoft visual C++ 2010 redistributed is required to continue w/ installation.....

I have admin privs, running net 4, sufficient memory

View 1 Replies View Related

AutoCAD Inventor :: 2012 Freeze On Shutdown - Clean Install

Dec 2, 2011

I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays.  All other programs work with no issue. All of the settings are default as installed.

So far I have tried: 

-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes

Computer:

Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000

View 2 Replies View Related

AutoCAD Map 3D :: Multiple Error 1406 Errors Trying To Install 2012

Jan 9, 2012

I'm trying to install AutoCad Map 3D 2012 on a Windows 7 x64 machine.  The user was

Successfully running the trial version.

Here a couple of the errors I get.

Could not write value Assembly to key softwareClassesCLSID{01255oCB-1BD0-42d5-BAC3-6567BFA308CC}InprocServer3217.0.54.0. Verify that you have sufficient access to that key, or contact your support personnel.

I have also attached a couple of the errors.

The user is a local admin of the machine, I have tried installing as the local administrator as well. I have tried to change the onwer in the registry and all give me the same error.

View 1 Replies View Related

AutoCAD Inventor :: Install Tube And Pipe In 2012 (product Design Suite Premium)?

Jun 4, 2013

I am trying to use the Inventor 2012's tube and pipe add on, but have all options related to it grayed out when I search for it. Is there something I need to install or a way to enable the add on for this?

View 2 Replies View Related

AutoCAD 2010 :: Open And Create A Drawing In 2012 From Visual Basic 2010

Jul 1, 2012

I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:

1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.

2. I wrote this in the heading of the form's

- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common

3. In the event Click of the Button1 I put this:

    Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
    AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
    Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
    acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
    'Draw a line
    Dim PT1(2) As Double
[code].....

View 2 Replies View Related

AutoDesk Smoke :: Moving Projects From 2012 SP3 To 2012 SAP2 SP3?

Sep 25, 2012

After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.

2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)

View 4 Replies View Related

AutoCAD 2010 :: 2010 Through 2012 Freezing When Using Open - Windows 7

May 23, 2012

I recently loaded several versions of AutoCAD on to a Windows 7 machine.  ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button.  This is true for AutoCAD 2010 through 2012.

Machine Specs:

Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card

I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.

View 3 Replies View Related

AutoCAD 2010 :: 2012 Will Not Respond

Mar 18, 2013

I have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF.  I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down.  On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..

View 4 Replies View Related

AutoCAD 2010 :: 2012 - How To Disable F1

Nov 20, 2011

how to disable F1 in autocad 2012. How to do this in 2012 version.  The F1 key doesn't appear  in the CUI under keyboard shortcuts.  My internet connection goes off and on and when it's off hitting the F1 key freezes my computer. so I need to disable it.

View 4 Replies View Related

AutoCAD Map 3D :: Can't OpenDWG In 2010 From 2012

Nov 16, 2011

I have saved back a drawing to 2007 in Map 3D 2012.  I have tried to open it in AutoCAD Map 3D 2010 but get a fatal error:

"Exception in ird.arx ARX Command

Unhandled Exceptiion 10002000 (Access Violation Reading 0xa433aef8) at address 5E2D89DCh"

"AuotCAD Error Aborting

FATAL ERROR:  Unhandled Access Violation Reading 0xa573b9c0 Exception at 5e28a140h"

What does this mean and what can I do to be able to open the drawing in AuotCAD Map 3D?

View 4 Replies View Related

AutoCAD 2010 :: Annotative Hatch In 2012?

Jan 27, 2012

I use a user-defined hatch often - just 45 degree lines say 4" apart in model space.  In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.

In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.

View 6 Replies View Related

AutoCAD 2010 :: Expresstools Don't Work In 2012?

Oct 20, 2011

My ribbon an pull down Menu show a Express tools comand but the comands dont work

which is the file that is loaded to run the expresstool?

View 5 Replies View Related

AutoCAD 2010 :: (2012 MEC) Embed PDF / Images To DWG?

Dec 16, 2011

why with autocad 2012 mechanical, I can't no more embed PDF or Images to a drawing but only load it as references, linked to a file path?

Previously I used Autocad 2009 MEC and there wasn't this problem.

I shall fix this because, when I load a dwg to our company management system, the pdf or images shall be embed to the dwg file.

If I load the pdf as OLE Object, it doesn't lock the view and the pdf zoom canghe with the dwg zoom, so it is acceptable.

View 5 Replies View Related

AutoCAD Inventor :: Compatibility Between 2012 And 2010?

Nov 10, 2011

I´ve started at a school which is using autodesk inventor 2010, but on my computer I have autodesk inventor 2012, and I can´t find the way to open the homework I do at home on the school computers. 

It is supossed that my inventor 2012 saves the files in 2010 format as I can read on the settings, but when I open it on the 2010 in shows me an error message about that it´s not possible open this file. Also I´ve tried to save as 2007 format, but it can´t open it. 

View 9 Replies View Related

AutoCAD 2010 :: 2012 Keeps Freezing And Crashing?

Dec 7, 2012

I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.

View 2 Replies View Related

AutoCAD 2010 :: Plotting An Airfoil In 2012?

Jan 15, 2012

I need to be able to import the airfoil geometry of a NACA 2412 airfoil.  I know how to get the XY coordinates but I don't know how to import these points (as a .txt file?) into ACAD.  What function would I use?  Spline?  If so how do I get it to draw all the points I have?  I need to then extrude the shape to be able to mill airfoil sections...that part I can figure out....just need to import the points to get a nice curve.

View 9 Replies View Related

AutoCAD 2010 :: 2012 MEP Cursor Disappears

Oct 3, 2012

At no specific time when using ACAD 2012 MEP the cursor disappears.  cross hairs and all.  the only way to get them back is to close ACAD and open it back up.  

View 4 Replies View Related

AutoCAD 2010 :: Wipeouts In 2012 Cannot Be Modified?

Apr 20, 2011

Upgraded to 2012 yesterday.  Today I've noticed that WIPEOUTs no longer have grips when they are selected.  It also seems as though they cannot be modified via the STRETCH command.

All I can think of off the top of my head is to explode the wipeout, isolate the elements, reassemble them as a polyline, modify as desired and then recreate the wipeout from the polyline.  But that's hardly efficient.

No grips wasn't too bad, but not responding to a stretch seems stupid.  We use wipeouts in many of our blocks.  We may take one block and modify it to create another similar block.  Recreating the wipeouts because they wouldn't stretch or couldn't be easily modified to adapt to the new geometry will be a real waste of time.

Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7

View 9 Replies View Related

AutoCAD 2010 :: Using 2011 And 2012 On The Same Drawings?

Aug 27, 2012

We are using AutoCAD 2011 and AutoCAD 2012 on the same drawings. It is slowing the drawings down in AutoCAD 2011. There is at least one person that only has AutoCAD 2012 on their machine.

View 2 Replies View Related

AutoCAD 2010 :: 2012 Freezing On Hatching

Mar 9, 2012

My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.

What could be the issue? Whats spec on my computer do I need maybe?

Also with the Recovery Management, it takes like forever to try and recover a drawing.

View 3 Replies View Related

AutoCAD Inventor :: Use 2012 With Vault 2010?

Jan 18, 2012

We are currently running Inventor 2010 Professional (64-bit) on our computers with Vault 2010 on a remote server, but are ready to upgrade to Inventor 2012 Professional.  Will we be able to continue to use Vault 2010, or will our Vault (ADMS?) need to go to 2012 also? 

A side question, what are the strategies to update the files in the Vault to 2012? As needed? Setup an automated task? 

View 1 Replies View Related

AutoCAD 2010 :: View Freezes In 2012?

Dec 14, 2011

My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.

View 4 Replies View Related

AutoCAD 2010 :: Crash When Opening 2012?

Aug 24, 2012

I have downloaded AutoCAD 2012 and when I try to open it my computer automatically shuts off without even openig AutoCAD. I tried downloading the newest version of AutoCAD 2013 and it does the same thing. Inventor fusion seems to open and work properly but not AutoCAD.

View 1 Replies View Related

AutoCAD 2010 :: 2012 Crashing After Plotting

Oct 4, 2011

My company just got new computers, I've loaded 2012 SP1 and our lisp comands on every machine.  After a plot, when someone goes to save and close the drawing, AutoCAD crashes.  It does not matter which plot device is used, the result is the same.  This includes the plot devices included in AutoCAD.  I have reinstalled autocad on one machine, no lisp commands, same result.  I have already tried some of the fixes proposed in other threads, nothing has worked.

System:

Win7 64 bit
i7 930
6Gb RAM
Radeon HD 6450

View 9 Replies View Related

AutoCAD 2010 :: How To Customize Interface In 2012

Aug 5, 2012

Where can I find a good document on how to customize the interface in AutoCAD 2012?I need to add an extra menu, palettes , custom text sizes...etc

View 3 Replies View Related

AutoCAD 2010 :: Downloading 2012 On Windows 8?

Mar 23, 2012

I just downloaded the windows 8 preview and I’m trying to download AutoCAD 2012 put I keep getting an error during the instillation so it’s not downloading.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved