AutoCAD 2010 :: 2010 Through 2012 Freezing When Using Open - Windows 7
May 23, 2012
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
View 3 Replies
ADVERTISEMENT
Dec 7, 2012
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies
View Related
Mar 9, 2012
My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
View 3 Replies
View Related
Aug 19, 2013
I have a problem that the software is not responding and freezing when creating new drawing or opening another one.
I have windows 7 64 bit Operating system installed on workstation Dell Machine
I look to a lot of discussion and I tried the mentioned ways but still same issue
FYI, this software was working fine with windows XP machine.
View 5 Replies
View Related
Jul 8, 2011
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
View 9 Replies
View Related
Jul 1, 2012
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
View 2 Replies
View Related
Sep 6, 2011
I am having issues with my computer completely freezing while performing a File, Open process. I'm in drawing 1, I save it, then go to open drawing 2. Drawing 1 will save, the open file window pops up. With me so far? While navigating through the file directory tree, my computer freezes. I do not chose a file that freezes during opening. It is during the process of getting to the folder drawing 2 resides in, and then it freezes. This happens to me multiple times a day. Ctrl +Alt+Delete will not work. I have tried letting my computer sit, as you would with a program not responding, and it doesn't unfreeze. The only option I am left with is a hard reboot. The only other program I have running is my MS Outlook.
I have been back and forth with our IT person, and because he can't replicate the problem (after trying one file open), he can't figure it out, or doesn't want to.
I am running AutoCad 2012 with a Dell Precision T3500, 2.13ghz, intell xenon E5506 processor, and 4gb of RAM. After looking at the system requirements, and reading that 2012 needs a 3.0 or higher processor, could this be the route of my issue?
View 8 Replies
View Related
Oct 11, 2012
I've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
View 2 Replies
View Related
Mar 23, 2012
I just downloaded the windows 8 preview and I’m trying to download AutoCAD 2012 put I keep getting an error during the instillation so it’s not downloading.
View 7 Replies
View Related
Mar 31, 2012
Ihave windows 8 consumer preview and i installed autocad 2012 but when i open autocad 2012, ribbon dont appear, when i write the command ribbon but appear a message like this " Unhandled exception has ocurred in a component in your application. If you click continue, the application will ignore this error anda attempt to continue.
Common Languaje Runtime detected an invalid program"
In Attachment , i put the image of the problem....
View 1 Replies
View Related
Jun 3, 2011
I bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies
View Related
Jan 10, 2012
when I try to open the program I get this message:
The application failed to initialize properly (Oxc0000034) Click on OK to terminate the application.
View 9 Replies
View Related
May 9, 2012
Autocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
View 5 Replies
View Related
Mar 13, 2013
Using AutoCAD 2012 SP2 on WinXP.
On a file server, when a folder permission has been set to "deny delete" we cannot navigate to that folder in the open file dialog box.
View 3 Replies
View Related
Aug 27, 2012
I have operated AutoCAD2011 for at least a couple years with no issues. last week i received a few automatic updates from Windows, and now AutoCAD won't open. what can i do?
View 1 Replies
View Related
Jul 6, 2011
why Autocad 2012 opens one window per drawing as opposed to Autocad 2007/2008 opening one window for as many drawings as you have open. (I also don't care to group/ungroup similar programs through Windows 7.) This must be an Autocad 2012 program default that I can't figure out to change.
View 9 Replies
View Related
Jun 2, 2010
I try to load AutoCAD 2010 on windows 7 but it keeps on failing Language Pack - English failed installation aborted, Result 1624 so it rolls back and doesn't install.
View 9 Replies
View Related
Jun 27, 2013
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies
View Related
Dec 17, 2009
In AutoCAD, I can go on the tray menu and select the scale list and select custon scales. I get the entire list I created and able to make and delete scales.
When I do the exact same thing in AutoCAD Civil 3D, it freezes up and won't let me do anyting, I then hit esc and I can start working in the drawing again.
what is going on in AutoCAD Civil 3D?
View 4 Replies
View Related
May 16, 2012
I have just loaded the student version of AutoCAD 2012 onto my brand new HP Pavilion Notebook which has 8 GB of memory - Processor AMD A8-3530MX with HP Graphics 1.90 GHz - running Windows 7 Home Premium 64-bit.
I have created a file in Adobe Illustrator which I converted to a vector image and exported it to AutoCAD. I have loaded the image and have cleaned it up. I am now trying to re-scale it and my session keeps freezing. When I look at the task manager I see that the program is not responding. I have ended the task many times now!
View 4 Replies
View Related
May 18, 2012
I have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
View 3 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Jan 21, 2012
When press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
What can i do to get the "open"-window?
View 2 Replies
View Related
Mar 18, 2013
I have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF. I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down. On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..
View 4 Replies
View Related
Nov 20, 2011
how to disable F1 in autocad 2012. How to do this in 2012 version. The F1 key doesn't appear in the CUI under keyboard shortcuts. My internet connection goes off and on and when it's off hitting the F1 key freezes my computer. so I need to disable it.
View 4 Replies
View Related
Nov 16, 2011
I have saved back a drawing to 2007 in Map 3D 2012. I have tried to open it in AutoCAD Map 3D 2010 but get a fatal error:
"Exception in ird.arx ARX Command
Unhandled Exceptiion 10002000 (Access Violation Reading 0xa433aef8) at address 5E2D89DCh"
"AuotCAD Error Aborting
FATAL ERROR: Unhandled Access Violation Reading 0xa573b9c0 Exception at 5e28a140h"
What does this mean and what can I do to be able to open the drawing in AuotCAD Map 3D?
View 4 Replies
View Related
Jan 3, 2013
My AutoCAD 2012 freezes every time when I do hatching. It doesnt matterthe size of the drawing nor the type of hatch I use.
View 5 Replies
View Related
Jan 27, 2012
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
View 6 Replies
View Related
Oct 20, 2011
My ribbon an pull down Menu show a Express tools comand but the comands dont work
which is the file that is loaded to run the expresstool?
View 5 Replies
View Related
Dec 16, 2011
why with autocad 2012 mechanical, I can't no more embed PDF or Images to a drawing but only load it as references, linked to a file path?
Previously I used Autocad 2009 MEC and there wasn't this problem.
I shall fix this because, when I load a dwg to our company management system, the pdf or images shall be embed to the dwg file.
If I load the pdf as OLE Object, it doesn't lock the view and the pdf zoom canghe with the dwg zoom, so it is acceptable.
View 5 Replies
View Related
Nov 10, 2011
I´ve started at a school which is using autodesk inventor 2010, but on my computer I have autodesk inventor 2012, and I can´t find the way to open the homework I do at home on the school computers.
It is supossed that my inventor 2012 saves the files in 2010 format as I can read on the settings, but when I open it on the 2010 in shows me an error message about that it´s not possible open this file. Also I´ve tried to save as 2007 format, but it can´t open it.
View 9 Replies
View Related
