AutoCAD 2010 :: Freezing Or Crashing Loading Specific Drawing
May 18, 2012
I have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
View 3 Replies
ADVERTISEMENT
Dec 7, 2012
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies
View Related
Jul 18, 2012
I'm the IT nerd and haven't used autocad before, but i'm trying to troubleshoot an issue with one of our users who is having this issue. From what I have seen, when he loads a drawing, I can see a whole heap of unidentified object messages down the bottom. The drawing loads, but it's missing all the text (mostly the dimensions).
He's told me that he can load it 4 or 5 times, and it will show up, but it fails more than it works.
View 8 Replies
View Related
Apr 23, 2013
I am running LT 2012 and it keeps freezing at the Loading customiztion files point... This locks the whole pc and I need to do a hard reset.
View 7 Replies
View Related
Jun 13, 2012
Have a specific drawing that the crosshair in the Y direction is broken (sse attached image). Exacctly in middle of screen this problem was seen also in older autocad releases (R2008)
The UCS is world and PLAN view is set, the screen is OK the display card + driver is OK. The weird thing is this is only in this dwg and even if it insert it to fresh dwg in comes good.
View 7 Replies
View Related
Mar 15, 2014
PremierePro CS6 was working fine until I updated an unrelated dll file for another (audio editing) program.
The file is a VST: Kontakt 5 8out.dll (Native Instruments).
Although PremierePro is suppose to be able to use 3rd party VSTs they usually crash for me so I export the audio, edit it, then reimport it.
How can I start PPro bypassing all plugins, then disable them?
View 1 Replies
View Related
Sep 25, 2009
Computer Specs:
Dell Dimension 3000
Windows XP (SP3)
750 MB of RAM
Pentium 4 (2.80 GHZ)
40 GB HD / 20 GB Available
** Security patches up-to-date.
Illustrator Version:
CS4 v14.0.0
When I am go to "File > Print" the print screen begins to load and then completely freezes. The default printer is set to "Brother GT-541". This is a digital garment inkjet printer. If I switch the default printer to something else, the print screen will load without issue. If I then change the destination printer in the drop-down menu to "Brother GT-541" it will freeze. Once Illustrator is frozen, I need to force quit in order to get back into Illustrator.
I contacted the company we purchased the Brother GT-541 from - to see if they were aware of any issues. There were none - but they explained that they have no customers who use CS4, most all of them use CS3 or prior. They advised that I update the Brother GT-541 printer driver, which I did - and it turned out to be no luck.
View 5 Replies
View Related
Jun 4, 2013
I experienced this issue with Gimp 2.6 whenever I had a lot of brushes in the brush folder. The only way I found to avoid the problem was to have less brushes in it. As a result, I never got to really use all of them like I had intended to.
The current version I'm using is 2.8. I updated Gimp because I saw the tagging system. I figured it'd be easier to locate the brushes I want to use. The program worked fine up until I added more folders to the brush folder to take advantage of the tagging system. Now the start-up freezes and crashes when it's updating the tagging cache.
In general, Gimp seems to get mad at me when I add a crap ton more than it's comfortable with.
View 4 Replies
View Related
May 23, 2012
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
View 3 Replies
View Related
Dec 31, 2013
I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
View 2 Replies
View Related
Nov 8, 2011
I have a drawing with an XREF in it and both drawing have items on layer 0. Is there a way of freezing the items in the XREF drawing that are on layer 0 but still layer 0 on in my drawing?
View 8 Replies
View Related
Mar 9, 2012
My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
View 3 Replies
View Related
Aug 19, 2013
I have a problem that the software is not responding and freezing when creating new drawing or opening another one.
I have windows 7 64 bit Operating system installed on workstation Dell Machine
I look to a lot of discussion and I tried the mentioned ways but still same issue
FYI, this software was working fine with windows XP machine.
View 5 Replies
View Related
Sep 29, 2013
I am trying to find out if it is possible to start/load the animation based on a specific point in its timeline? The animation I am creating is a parallax animation based on mouse position and I am trying to load it in the middle of the animation and based on the users mouse position will play forward or backwards from that point.
View 2 Replies
View Related
Dec 17, 2009
In AutoCAD, I can go on the tray menu and select the scale list and select custon scales. I get the entire list I created and able to make and delete scales.
When I do the exact same thing in AutoCAD Civil 3D, it freezes up and won't let me do anyting, I then hit esc and I can start working in the drawing again.
what is going on in AutoCAD Civil 3D?
View 4 Replies
View Related
May 16, 2012
I have just loaded the student version of AutoCAD 2012 onto my brand new HP Pavilion Notebook which has 8 GB of memory - Processor AMD A8-3530MX with HP Graphics 1.90 GHz - running Windows 7 Home Premium 64-bit.
I have created a file in Adobe Illustrator which I converted to a vector image and exported it to AutoCAD. I have loaded the image and have cleaned it up. I am now trying to re-scale it and my session keeps freezing. When I look at the task manager I see that the program is not responding. I have ended the task many times now!
View 4 Replies
View Related
Sep 6, 2011
I am having issues with my computer completely freezing while performing a File, Open process. I'm in drawing 1, I save it, then go to open drawing 2. Drawing 1 will save, the open file window pops up. With me so far? While navigating through the file directory tree, my computer freezes. I do not chose a file that freezes during opening. It is during the process of getting to the folder drawing 2 resides in, and then it freezes. This happens to me multiple times a day. Ctrl +Alt+Delete will not work. I have tried letting my computer sit, as you would with a program not responding, and it doesn't unfreeze. The only option I am left with is a hard reboot. The only other program I have running is my MS Outlook.
I have been back and forth with our IT person, and because he can't replicate the problem (after trying one file open), he can't figure it out, or doesn't want to.
I am running AutoCad 2012 with a Dell Precision T3500, 2.13ghz, intell xenon E5506 processor, and 4gb of RAM. After looking at the system requirements, and reading that 2012 needs a 3.0 or higher processor, could this be the route of my issue?
View 8 Replies
View Related
Jul 8, 2011
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
View 9 Replies
View Related
Dec 7, 2011
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
View 9 Replies
View Related
Dec 13, 2012
I've previously posted about poor performance across our WAN, and working with Toolspace open. I have suspected that maybe the drawing wasn't loading completely, so whenever I did certain operations, C3D needed to go back across the WAN to the server for more of the drawing, or maybe just to read some portion of the drawing file, where the request was getting delayed by latency in the server.
Anyway, today, I copied a drawing file to my harddrive and opened it. As expected, the drawing loaded fairly quickly, except for having to go out to the server to syc the references and xref'd drawings. But once loaded, everything worked the way it is supposed to. I can turn on the contours, and it just happens. I can open the drawing settings, and then close them, and I instantly have control back, all with Toolspace open.
Now, C3D may still be needing to go back to the drawing for whatever it is that it needs, but being on my harddrive, it can get what it needs very quickly.
My question is: Why doesn't C3D completely load a drawing into memory? We now have 64 bit systems with access to gobs of memory.
View 9 Replies
View Related
May 31, 2012
started a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies
View Related
Feb 13, 2012
I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
View 6 Replies
View Related
Oct 2, 2012
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jun 11, 2013
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
View 1 Replies
View Related
Dec 28, 2011
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies
View Related
Apr 6, 2012
I created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies
View Related
Aug 12, 2010
A consultant sent us their titleblock along with the true type font. I copied the font and pasted it into my AutoCad 2010 fonts folder. I noticed that the title block text style is "standard." When I try to set the font in standard to the true type font, the font does not appear in the list.
View 4 Replies
View Related
Nov 3, 2011
We have a machine that keeps crashing while trying to open a drawing in 2012 LT or even in 2012 Full autocad.. ive uninstalled and reinstalled and still keeps crashing.
View 5 Replies
View Related
Apr 27, 2012
i usually get stock at this screen , usually what happen is i click "Continue" and it load the video screen and i start working but now nothing ... just nothing when i had this before i try to restart sometimes work sometimes it's just load me the Autocad 2012 "Non-Civil3D" .
View 7 Replies
View Related
Jul 15, 2010
I have just upgraded to two new computers
They are identical, One computer has this error the other doesn't
My PC specs are
AMD Quad 3.2ghz, 8GB DDR3 Ram, 500GB, ATI 5770 1GB
The Error is attached
after i post this i will re-install autocad just to see if i still get the same error. AutoCad 2011
View 9 Replies
View Related
Sep 24, 2012
Am trying to insert a drawing to specific coordinates, till now i did this part of coding; though this is executing but the drawing is not getting to coordinates specified
public void coordinates()
{
string dwgName = HostApplicationServices.Current.FindFile("D:\AutoCAD DWG's\SE-02416_37_A.dwg", acadApp.DocumentManager.MdiActiveDocument.Database, FindFileHint.Default);
//Database db1 = new Database(false, false);
Database db1 = new Database(false, false);
//db1.ReadDwgFile(dwgName, System.IO.FileShare.Write, true, "");
db1.ReadDwgFile(dwgName, FileOpenMode.OpenForReadAndWriteNoShare, true, "");
[code]....
View 3 Replies
View Related
