AutoCAD 2010 :: Stops When Loading Template
Feb 13, 2012
I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
View 6 Replies
ADVERTISEMENT
May 30, 2012
When I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
View 1 Replies
View Related
Feb 9, 2009
after a serious virus attack Photoshop CS4 stops loading at message "Measuring Memory".
View 5 Replies
View Related
Feb 29, 2012
the Photoshop CS5.1 that I have installed on my Windows 7 64b has stopped working. It still works on my other computer though. It starts up just fine, but when I go to Open a PSD file (which I have edited here before) nothing happens -- absolutely nothing! When I try to create a new file the same nothing happens. I sure hope I don't have to reinstall or something. I don't think I've made any updates to Photoshop, it just stopped working this week for no apparent reason that I can think of. I also went back and tried my CS5 version and the same thing happens.
View 8 Replies
View Related
May 19, 2008
I have been using Photoshop.
I went to load Photoshop and for some reason it stops loading at the opening screen at the: Reading Text Global Resources...Done.
It will just stop until I click the X to close the program, I have Window check for a solution, then it closes?
I am using CS>Windows Vista Ultimate>2GB Ram>Plenty of free disk space.
View 6 Replies
View Related
Oct 25, 2012
Trying to autoload and update the current & or new drawing to the most recent form or the LKS
This is what my lisp file has
(AecImportLayerKeyingStyle "D:drawingsLibraryAusContent13Aus-Layer&LayerKeyStyles.dwg" "Multi-Level")
(AecSetCurrentLayerKeying "Multi-Level")
On loading drawing, ACA returns
AutoCAD Architecture menu utilities loaded.ERROR: Unable to import the style 'Multi-Level' from 'D:drawingsLibraryAusContent13Aus-Layer&LayerKeyStyles.dwg'
The LKS already exists in the drawing. Renaming it and pasting the first line to the command line results in a nil return and the LKS is not imported.
Format seems correct. Path is correct. It can't not import because it's already in the drawing. Renaming existing does nothing.
View 2 Replies
View Related
Nov 3, 2013
Got a new Windows 8.1 PC. Successfully transferred all photos (about 12000) to the new hard drive. When I open Photoshop and use "get photos from files and folders", I can locate the pix but when I try to import them, the process starts then stops without bringing any to the organizer.
View 2 Replies
View Related
Apr 16, 2010
As I'm working in 2011 all of a sudden when I want to deselect all I hit the ESC key and objects are still selected. I can right click and select deselect all and that works. If I shutdown AutoCAD and restart the ESC key works again.
View 9 Replies
View Related
May 17, 2011
The problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
View 2 Replies
View Related
May 31, 2012
started a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies
View Related
Oct 2, 2012
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jun 11, 2013
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
View 1 Replies
View Related
Dec 28, 2011
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies
View Related
Apr 6, 2012
I created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies
View Related
Aug 12, 2010
A consultant sent us their titleblock along with the true type font. I copied the font and pasted it into my AutoCad 2010 fonts folder. I noticed that the title block text style is "standard." When I try to set the font in standard to the true type font, the font does not appear in the list.
View 4 Replies
View Related
Jun 24, 2012
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies
View Related
May 9, 2012
i have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies
View Related
Feb 19, 2013
Xref overlays are not loading properly. Coordinates are off after loading ... even with insertion at 0,0,0.
View 7 Replies
View Related
Aug 27, 2012
When I try open AutoCad, at first it loads fine, doing all the pulg ins and that, then just stops.
The text in the corner just says "Loading", and I've left it for hours an it really isn't.
View 4 Replies
View Related
Jul 18, 2012
I'm the IT nerd and haven't used autocad before, but i'm trying to troubleshoot an issue with one of our users who is having this issue. From what I have seen, when he loads a drawing, I can see a whole heap of unidentified object messages down the bottom. The drawing loads, but it's missing all the text (mostly the dimensions).
He's told me that he can load it 4 or 5 times, and it will show up, but it fails more than it works.
View 8 Replies
View Related
Jul 29, 2011
I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
View 2 Replies
View Related
Feb 27, 2012
1. How to set the “template” (dwt) that the AutoCAD starts with?
As we start the AutoCAD and save the file, then which “template” the “dwg” is using by default? Is it, for example, the acad.dwt or acadiso.dwt?
2. How to set the default template use as we start the AutoCAD? How to choose it to be the acadiso.dwt but not the acad.dwt?
3.Is there a way to know the template based on which a particular DWG file is created?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Feb 9, 2012
When running VS 2010 express in debug mode, for either AutoCAD 2010 or 2012, 64 bit, AutoCAD gets slower and slower loading with each subsequent debug session until it becomes intolerable. A system restart is necessary. Is this normal? I see this on a fast machine with tons of ram. During the waits there are patches of white screen in the various AutoCAD interface components. The performance hit is exponential with each session. The first debug is normal, The second is slightly slower. The third is noticeably slower and so on.
View 3 Replies
View Related
Apr 5, 2013
I have added a few custom autocad commands that are specific to my scenario. I created Ribbon (and Menu for classic mode) for these commands and they are working fine. The only issue is that these Buttons (Ribbon and Menu for classic mode) are not loading the images(icons). All I get is a cloud image for both commands.
I have used 16X16 for small image and 32X32 for large image. Both are bmp files. These are attached to the custom Autocad command that I am using. The commands themselves are working fine, except for the image which is not displayed. In short, what can be the possible reason for images not showing up?
View 4 Replies
View Related
Oct 4, 2010
I am having a problem with AutoCAD crashing without fully loading. I will get the splash screen and the application background will momentarily appear with "AutoCAD 2011" in the title bar then it will all disappear with no visible error message. By checking ACD2011ENUAdlm.log in C:Documents and SettingsAll UsersApplication DataAutodeskAdlm I get the following error message:
3536 2010/10/04 10:05:39 Reason=Fatal error
View 9 Replies
View Related
May 18, 2012
I have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
View 3 Replies
View Related
Dec 6, 2012
How do you properly save a DWG as a template?
View 1 Replies
View Related
Jul 19, 2012
need to know how to set up a drawing template
View 2 Replies
View Related
Feb 16, 2011
So that when AutoCAD starts up, a new .dwg file is started, using my specified dwt. file as a template.
View 9 Replies
View Related
Feb 16, 2012
Is it possible to insert a second template into a drawing, so you can have two different titleblocks in layout (paperspace)
View 9 Replies
View Related
Apr 23, 2012
I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies
View Related
