AutoCAD 2010 :: How To Set Up Default Template (Specified DWT)
Feb 16, 2011So that when AutoCAD starts up, a new .dwg file is started, using my specified dwt. file as a template.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Converting Default Part Template To Custom Template?
Jan 23, 2012Converting a default part template to a custom template?
View 1 Replies View RelatedRevit :: Why Stair Type That Works In Default Template Stuffed When Copied To Own Template
Jul 2, 2012I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
AutoCAD 2010 :: Modify DEFAULT SCALE LIST To Show Metric Scale List In Imperial Template
May 2, 2012Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedAutoCad :: Set Default Template For New File Creation?
Apr 30, 2011Is there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
View 2 Replies View RelatedAutoCAD Civil 3D :: Get Default Object Name From Template?
Dec 22, 2013ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
AutoCAD Inventor :: Could Not Open Default Template File
Jun 27, 2013When I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
FDS Ultimate 2013
AutoCAD Inventor :: Template Files Reverting To Default
Aug 5, 2013We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
AutoCAD Inventor :: Set Default IDW Template Used / When Select New Drawing
Dec 16, 2013How do you set the default IDW template used when you select 'New Drawing?'
View 2 Replies View RelatedAutoCAD Inventor :: Reduce Size Default Template?
May 21, 2012I am trying to reduce the size of the a size title block, but I have not been able to. How would you resize it?
View 3 Replies View RelatedAutoCad :: Setting Default Template Loaded Upon Launch
Jul 6, 2013I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
AutoCAD Inventor :: Template - Unable To Save New Settings As Default
Oct 26, 2012I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
AutoCAD Inventor :: Default Template When Using Demote (Create In Place Component)
Mar 6, 2012how to change Default template when using "Demote" in an assembly? Discovered that it was set to use harness.iam as default, want to have standard.
View 1 Replies View RelatedAutoCAD Inventor :: Where Is Configuration For Default Template Measurement Units Stored
Nov 13, 2012Where is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
AutoCAD Inventor :: Set Default Corner Seam Behavior In Sheet Metal Template?
Jan 10, 2008Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies View RelatedRevit :: Default Template Not Working
Jul 11, 2013I installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.
Revit :: Default Template File Invalid
Jun 26, 2011when I start Revit it show me this message, I cant find any component in my library components, any solutions?It says: "The default template file you have specified does not exist:"
View 6 Replies View RelatedRevit :: Project Units Template Default
Nov 16, 2011why it seems that Revit ignores the Project Units setting in the template file when opening an IFC file? Even when the template is targeted in the IFC open dialogue?
The IFC was exported from ACA 2008 with the Imperial units set.After opening the IFC file in Revit 2012, the project is set for Metric, even though the referenced template (.rte) is set up with Imperial.
Xara :: Choose A File And Save It As Default Template
Apr 20, 2012Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies View RelatedAutoCAD 2010 :: How To Set Template (DWT)
Feb 27, 20121. How to set the “template” (dwt) that the AutoCAD starts with?
As we start the AutoCAD and save the file, then which “template” the “dwg” is using by default? Is it, for example, the acad.dwt or acadiso.dwt?
2. How to set the default template use as we start the AutoCAD? How to choose it to be the acadiso.dwt but not the acad.dwt?
3.Is there a way to know the template based on which a particular DWG file is created?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Saving DWG As Template?
Dec 6, 2012How do you properly save a DWG as a template?
View 1 Replies View RelatedAutoCAD 2010 :: Set Up A Drawing Template?
Jul 19, 2012need to know how to set up a drawing template
View 2 Replies View RelatedAutoCAD 2010 :: Stops When Loading Template
Feb 13, 2012I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
AutoCAD 2010 :: Insert Second Template Into A Drawing?
Feb 16, 2012Is it possible to insert a second template into a drawing, so you can have two different titleblocks in layout (paperspace)
View 9 Replies View RelatedAutoCAD 2010 :: Sheet Title Block Template
Apr 23, 2012I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedAutoCAD 2010 :: Template File Opens 2 Drawings?
Jan 24, 2013I have the school edition of ACAD 11, and we made a template in class, and now whenever I open it from windows, it opens 2 drawings. It did this with my personal computer as well as the school computer I was on at the time. I'm guessing I changed a setting within the template? It isn't 1 drawing of the template and one fresh one like I read alot here, both seem to be my template file in dwg.
View 1 Replies View RelatedAutoCAD 2010 :: Importing Layout From Template Not Working?
Oct 16, 2013So everytime I import a layout from my template, the scale comes out wrong. The border is way too big, viewport, and the stamp is also way to big. It's being scaled by approximately by 12.28 times.
Here's what I can share:
- both drawings are in inches in both files
- all that 'insunits' stuff is set to zero in both files
- 'measurement' and 'measureinit' is set to zero in both files
- using AutoCAD 2012
- xyz scale is all at 1.00
- the titleblock itself almost imports correctly, only some of my att text doesn't come out properly as well.
As far as i can tell it's the command 'from template' issue. Because when i cut and paste the templates layout contents, it comes out fine.
AutoCAD 2010 :: Inserting Template File Which Contains Attribute With Image In It?
Mar 7, 2013I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
AutoCAD 2010 :: Xref Masters / Template VS Single Xrefs
May 23, 2013I am currently working on quite a large scale project with drawing packages of up to 50 drawings. Each of these drawings are layouts and need to have the same set of xrefs (ie. survey and road design) with the same layer properties. I may have one set of 50 drawings for Road Lghting and another for drainage for example. Each requiring a different set of xrefs and different set of layer properties.
Where I currently work I have a choice between to systems to run the job, both involve the use of scripts to control the layer states. My question is, and i wanted to start a discussion on which option is better, is whether to use Xref templates which nest all the individual xrefs into each of the 50 drawings, or use another script to attach/change the list of xrefs in each of the 50 drawings.
Xref Master/template option..Nest all required xrefs in one master, ie. X_DRAINAGE_MASTER.DWG Use a script to control layer states, ie. DRAINAGE_ LAYERS.SCR I think this has greater control over random mistakes with draw order issues from other draftsmen.Attache individual xrefs option. Individual xrefs in each drawing with a script ready which loads/changes the xrefs as I need. This script also controls draw order Also uses the same DRAINAGE_ LAYERS.SCR to control layer states I think this has a higher likelihood of draftsmen making mistakes with random xrefs and/or draw order problems. Probably takes more time to update all drawings with a respective change as opposed to updating one master xref.Does nesting a whole load (maybe 50-100 xrefs) into a master create slow working drawings?
Worth noting I have the ability to apply any number of script in any order I want through the use of a spreadsheet.
AutoCAD 2010 :: Recovering Purged Items After Importing To New Template Sheet?
Mar 28, 2012Needed to purge items in a drawing to recover a drawing in order to repair corruption within it it. I purged and audited the drawing in question and then created a block or the drawing elements which I imported to a new drawing sheet. That's great, all is well but.....obviously (now) the only layers, dimscale,etc. items I normally use in my template sheet are gone and only the items remaining after the purge are the ones that were in my original drawing.
How can I, or can I replace my normal full layer list, dim settings, blocks, etc?
AutoCAD LT :: Inserting DWG Into MS Word 2010 Results In Overlay Of Template Over Drawing
Oct 31, 2012I inserted a dwg created with Autocad LT 2004 into a MS Word 2010 document using: Insert | Object | Create from file. The result is the desired drawing is inserted but, in addition, the template used to create the dwg is also included and visible as if it is an additional layer. How to keep this from happening?
View 4 Replies View Related