I inserted a dwg created with Autocad LT 2004 into a MS Word 2010 document using: Insert | Object | Create from file. The result is the desired drawing is inserted but, in addition, the template used to create the dwg is also included and visible as if it is an additional layer. How to keep this from happening?
View 4 RepliesWhile in model space anything I insert, copy/paste or bring into model space looks squashed compared to the original data. It's like the Z axis is rotated. As it sits all the original data in model space looks fine or "flat" as it should.
When measuring the inserted squashed object it's giving me the correct dims but because it's squashed 18" looks like 12", if that makes any sense. Also if I copy/paste the original data in model space into another new template it then looks squashed.
Is there a system variable or setting just for that dwg that could have been changed?
I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
What is the best way to insert a word document in to a autoCad 2010 drawing.Can you cut & paste ?
View 9 Replies View RelatedI am using AutoCAD 2012.  When I use Paste Special to insert and object as an Image Entity AutoCAD shuts down. I used it for years on older versions of AutoCAD with no problems. It is good to use when inserting a PDF into a drawing to trace over the objects for CAD use.
View 4 Replies View RelatedI have a drawing with some annotative blocks. Â ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) Â the Blocks do not show up. Â
Is there any way to get arround this? Â Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.
How can you changed the text editor to a word processor like word?Â
View 1 Replies View Relatedneed to know how to set up a drawing template
View 2 Replies View RelatedHow to export the .dwg file to Microsoft WORD as a base/background for further word processing on top? Is there any direct way to convert the file that can use in WORD?
View 1 Replies View RelatedHaving problems when copy/cut and paste. When pasting or inserting a block into a drawing the subject disappears.
View 4 Replies View RelatedIs it possible to insert a second template into a drawing, so you can have two different titleblocks in layout (paperspace)
View 9 Replies View RelatedI have inserted (Object) a Photoshop PDF into Word documents. The results is TERRIBLE!
Â
I had a professional photographer photograph drawings in RAW. He gave me a DVD with TIFF images he created in Photoshop. I opened these TIFF files in Photoshop CS6, cropped, sized and rotated to landscape. I saved it as a PDF. I then opened Word (Windows 7). I inserted the Photoshop PDF. It looked terrible! Lines are missing or gray. If I print them out directly from Photoshop (not as PDF) they come out perfect. But my publisher wants everything in ONE document (Word).
I have an old drawing where I am inserting layout from the template. The problem is that the template is off from the white sheet of paper. My templates are .dwt files and usually work fine.
View 9 Replies View RelatedAn Overlay track has a photo on the end of the track, there are also photos at the start of the track.
When right clicking on this track behind a photo at the start end of the track to insert a photo behind an existing photo, the new photo goes behind the photo at the end of the track.
Is there any way to use right click and insert the photo where you want it?
Losing image quality after adding layer and inserting into MS WORD.
View 6 Replies View RelatedCan you import layers from a template to a drawing with a different template
View 3 Replies View RelatedI have a 3M label template that is only offered in a .doc and I need to use it in Illustrator. Is there an (easy) way to do this?
View 7 Replies View RelatedWhat is the best/cleanest way to create letterhead artwork to be used on a Word template?
Â
Right now I'm just creating, copying and pasting, but it seems there must be a more professional way. InDesign, or is Illustrator OK?
Trouble with embedded OLE DWG objects in word 2010 not opening with AutoCAD 2012Â
We have a user that can't open some OLE DWG files from within a word document. He had 2010 AutoCAD LT on his machine for a while then was upgraded to 2012 AutoCAD (non LT) once that was there LT 2010 was unistalled. since then he has not been able to open certain embedded OLE files within Word. Other users that have other ever had AutoCAD 2012 have no issue opening this embedded DWG files.Â
i found this thread (URL....) which sounds exactly what is going on with my enduser. But the fix provided is for AutoCad 2000-2012 not the LT versions.
i have a cd template that im using to make a cd cover design for a friend
i have tried to bring a photo onto the template, when i go to resize the photo
the whole thing resizes even the template how do i do this
I have a picture that I made in paint shop pro 8.
to make large magnets with my own picture. Vista Print has these guides for making the pic.
Full Bleed Size (starting document size)
5.59" x 4.33"
142mm x 110mm
1677 x 1300 pixels
* Finished artwork should use the full bleed dimensions for best results.
Document Trim Size (final size after being cut)
5.47" x 4.21"
139mm x 107mm
1642 x 1264 pixels
* keep all text within the safe margin.
Resolution
300 DPI
They are telling me to verify:
1. final document size is correct. (5.59" x 4.33")
2. all background colors and images bleed to the edges of the document at the full bleed dimensions (5.59" x 4.33").
3. all important text and images are within the safe margin (.137” from the edge of your document).
4.resolution is 300 DPI at 100%.
5. all fonts are converted to outlines (Adobe Illustrator and Corel Draw).
I would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
This isn't new or original, so I know there's got to be a better way to streamline it. Me and my team are going to be at an event, and we're going to take lots of photos. We want a way to very quickly apply a template around these photos. In this case, we're making it look as if the photos are the front page of a newspaper.
Â
I'm speaking to one of my company's designers, and he seems to think we would have to do this manually in Photoshop 1 by 1, but I know there has to be a better way. There are tons of iPhone (etc) apps to apply templates/skins to photos.
Â
What's the easiest solution to my problem?
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedSetting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedI've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc.  I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
My insert script always plots different results(off by a little bit, but not much)... unless I manually paste them line by line which complete defeats the purpose of having a script.
(command "-insert" "RK_183" "8581,10812,0" 1 1 90)(command "-insert" "RK_183" "8581,10949,0" 1 1 90)(command "-insert" "RK_183" "8916,10812,0" 1 1 90)(command "-insert" "RK_183" "8916,11096,0" 1 1 90)(command "-insert" "RK_183" "8916,11234,0" 1 1 90)(command "-insert" "RK_183" "8581,11096,0" 1 1 90)(command "-insert" "RK_183" "8581,11234,0" 1 1 90)(command "-insert" "RK_183" "8581,11381,0" 1 1 90)(command "-insert" "RK_183" "8581,11518,0" 1 1 90)(command "-insert" "RK_183" "8916,11381,0" 1 1 90)(command "-insert" "RK_183" "8916,11518,0" 1 1 90)(command "-insert" "RK_183" "8916,11665,0" 1 1 90)
[code]...
In some drawings the viewports automatically display viewport objects when I copy them and some they do not. There must be a systems variable and I searched through the systems variable tool in the Express tools and couldn't find it. How to get consistent results when copying viewports.
View 6 Replies View RelatedHow can I over lay one drawing onto another as simple as poss.
View 1 Replies View RelatedIs there a way to paste the results of a mass properties query to the drawing rather than to a file?
I have a complex shape that I am analyzing and would like the properties as part of the drawing for refence purposes.
I've got an OLE work document spec that is 2 pages formatted correctly in MS word. When i link in the second page the formatting resets to the beginning in the .dwg file, but is retaining it's correct format in the linked word document. For example the 2nd page in the word doc starts at 2.9.....but is displaying 1.1 in the dwg file....is there a command to stop the reset of 1.1?
View 2 Replies View Related