AutoCAD 2010 :: Set Up A Drawing Template?
Jul 19, 2012need to know how to set up a drawing template
View 2 Replies
ADVERTISEMENT
AutoCAD 2010 :: Insert Second Template Into A Drawing?
Feb 16, 2012Is it possible to insert a second template into a drawing, so you can have two different titleblocks in layout (paperspace)
View 9 Replies View RelatedAutoCAD LT :: Inserting DWG Into MS Word 2010 Results In Overlay Of Template Over Drawing
Oct 31, 2012I inserted a dwg created with Autocad LT 2004 into a MS Word 2010 document using: Insert | Object | Create from file. The result is the desired drawing is inserted but, in addition, the template used to create the dwg is also included and visible as if it is an additional layer. How to keep this from happening?
View 4 Replies View RelatedAutoCad :: Import Layers From A Template To Drawing With Different Template
Jun 9, 2011Can you import layers from a template to a drawing with a different template
View 3 Replies View RelatedAutoCAD Inventor :: Showing Parameters Of Drawing Template On Actual Drawing
Jul 26, 2013I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedAutoCAD Inventor :: IPart Drawing Template - One Drawing File Versus Individual Drawings
Jun 21, 2013Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedAutoCAD Inventor :: Copy Drawing Views To New Drawing Template
Sep 20, 2013I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
AutoCAD .NET :: Create Drawing From Template DWG
Nov 13, 2012I want to open dwg from template:
DocumentCollection acDocMgr = Application.DocumentManager;
Document acDoc;
try {
[Code]....
But on the line "acDocMgr.MdiActiveDocument = acDoc" AutoCAD is hanging and in around 10 sec AutoCAD closes.
How does the new document from template set active (do current)?
AutoCAD LT :: Updating Drawing Template
Feb 25, 2013I seem to recall there is a method of substituting old drawing templates with the latest version on open drawings, but for the life of me can neither remember what the command is or enter anything into the ACAD Help search that results in anything remotely useful .
View 9 Replies View RelatedAutoCad :: How To Change Template Of A Drawing
Dec 4, 2012I drew in the wrong template and now i cant change it.
View 9 Replies View RelatedAutoCad :: New Drawing Template Reload
Mar 31, 2011I think I have erased my template folder. So setting up new drawing has been a problem. Can I load a new template folder?
View 4 Replies View RelatedAutoCad :: Insert Template To A Drawing
Nov 29, 2012I've created a set of templates, A3, A2, A1 A0 etc.
When I open the .dwt at A0 it is fine, the correct dimensions for A0, everything is how it should be.
Now, when I'm in a drawing and go on the tabs, right click, "From Template", select the A0 template and it opens a new tab as normal.
However, the paper size is correct, A0. But the actual frame with the attributes is very small in the cornet, about 25 times smaller, so I'm thinking units, mm to inches, but all the INSUNITS are set to 6.
AutoCAD 2010 :: How To Set Template (DWT)
Feb 27, 20121. How to set the “template” (dwt) that the AutoCAD starts with?
As we start the AutoCAD and save the file, then which “template” the “dwg” is using by default? Is it, for example, the acad.dwt or acadiso.dwt?
2. How to set the default template use as we start the AutoCAD? How to choose it to be the acadiso.dwt but not the acad.dwt?
3.Is there a way to know the template based on which a particular DWG file is created?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD .NET :: Copy All Objects To New Drawing Template
Nov 10, 2010I've tried this one Autodesk Developer Guide. But it hangs.
What i need to do is copy all objects into a new drawingtemplate and automaticaly run some code over this.
And close the drawing where i started the program.
AutoCAD Inventor :: Updating Of Drawing Template
Oct 5, 2010I have crated a drawing of the part. Now I must be updating the drawing template. How I can update the drawing templates to old drawings?
View 6 Replies View RelatedAutoCAD .NET :: Creating New Drawing File Using Template
Apr 22, 2012How I can create new drawing(.dwg) file using drawing template(.dwt)file in back end (Means with out showing in front end).
View 4 Replies View RelatedAutoCAD Inventor :: Logo In Drawing IDW Template?
Dec 12, 2011Still working with INVENTOR 10.
When editing the Title Box in a Drawing Template and attempting to insert a LOGO (bmp file) the logo file justs show an icon for the Logo and not the Logo
AutoCAD Inventor :: Drawing Template Objects
Jun 21, 2013On my company's default drawing template, I have a text block on there with some drawing notes. We often edit some of the notes on the end at each drawing so I didn't create it on the "title block" layer, rather it's on the "top" layer. I also added (in the template) a revision table with Rev. A being "Released for Production" (because we are weird). How can I constrain those on the sheet so when I change sheet size, they stay in the same position relative to the corners of the sheet?
View 1 Replies View RelatedAutoCAD VB :: Edit Dimension In Template Drawing
Jun 22, 2012I need to modify some of the dimensions (text only) in a standard template of outline drawing for different cases. I tried to identify the dimensions which need modification by using handle.
But after that i have no idea how to change the text in it.
AutoCAD Inventor :: Can Not Open Drawing Template
Jun 13, 2013i use Inventor 2012 and Vault Collaboration 2012, and I often find drawing template cannot be open. with error message The template file is open. Please close it and try again
in fact, I did not open the template file.
AutoCad :: Title Block Template Drawing
Apr 5, 2011I created a standard title block template drawing for my student classwork exercises, and when I constructed the title block I keyed in real dimensions to ensure the title block would completely print on a piece of 8.5 X 11 paper. Now whenever I attempt to draw a large scale drawing (say a 36" dia circle, it draws the circle well outside my title block. I know why this is happening, I just need some tips about how to allow a title block template to be constructed around my current drawing reguardless of the drawing scale.
View 5 Replies View RelatedAutoCAD 2013 :: Drawing Template And Associated Files
Jan 10, 2014I have created a drawing template for survey and I need to distribute it to the field crews and eventually put it on the server. The template contains description keys, point styles, point label styles, custom point file formats, figure styles, figure prefix database, line code sets, etc.
How do I transfer all the external files along with the drawing template? Is it a straight forward copy? Etransmit doesn't seem to do it unless additional files are manually included, but I can't figure out what files to include or where they live.
AutoCAD Civil 3D :: Viewcube And UCS In Template Drawing
Jul 30, 2012I set my template dwg UCS to world. The viewcube will straighten up, i.e. North points up on the screen. I save the template, start a new drawing using the template and my viewcube rotates every time. I have to reset the UCS to world. What would cause this?
View 2 Replies View RelatedAutoCAD Inventor :: Get Excel Bom Template In Drawing?
Aug 22, 2012i am having a BOM template for the parametric modelling i have created using the excel sheet input link.
when i create the drawing from the model the default Bom part list is coming, instead of that i need to get the Excel Bom Template i have created based on the input excel link.
How to get the Excel Bom Template in the drawing.
AutoCAD Civil 3D :: Change Template By Another In The Drawing
Feb 14, 2012I have a drawing what have a template by defect, and i would change the original template by another in the same drawing.
View 9 Replies View RelatedAutoCad :: Plotting Drawing Into Prepared Template
Mar 15, 2012My employer wants me to plot to pdf so they can print it "upstairs".
So I drew a drawing and then opened up the template he wanted me to plot it in and pasted it in there, it was way to big for the template, so I figured I would scale the drawing to make it fit - heres my problem, when I scaled it the hours I had spend dimensioning got scaled as well.
Is there a way to scale without scaling measurements? Or is there a way to alter the template before I start?
AutoCad :: Metric Drawing In Imperial Template?
Aug 1, 2011I have copied building from metric drawing to imperial template the template i use. Now I want to dimension it but impeial dimension are not equivalent to metric,which should be because building stays the same size, i can scale the building but i want to know if there is way to overcome this issue without scaling the building
View 1 Replies View RelatedAutoCad :: Import External Drawing Into Own Template?
Feb 26, 2013I am attempting to import an external drawing into my own template. However this particular drawing refuses to insert. I have inserted quite a few from the same source but this one will not insert.
View 9 Replies View RelatedAutoCad :: Modifying A Drawing Template That Contains Several Layouts
Mar 6, 2012I am looking at modifying a drawing template that contains several layouts (A0 to A4 size pages). We want to be able to input drawing information for the title block in one place and duplicate the information across all of the layouts without manually copying it across (in an effort to enforce 1 dwg per drawing). Looking into this, one way looks to be using dwgprops to define the text content and then use fields to populate the required parts of the title block...
My question is this: Is there any way of setting it so that when a user starts a new drawing, a prompt comes up on the screen asking for the pertinent information before the drawing is started and the user forgets to put the right info? Lsp or other means can be considered.
AutoCad :: Creating A Drawing Border Template
Oct 24, 2011Want to create a drawing border, a box on the right hand side containing all the information about the drawing. I want this to be a template so each drawing I create will have the drawing border on the right.
View 6 Replies View RelatedAutoCad :: Drawing Template Won't Insert In Layout
Apr 3, 2012I am using Autocad 2012, I made a drawing frame template up in model space, then saved it into the DWT template folder, when I go into Layout and into insert to insert the template it will not show up.
I reloaded the DWT template back into model space and saved it as a DXF and I am able to insert the dxf template in Layout using the insert Block.
I can get the job done by using the dxf template but I would like to be able to insert the DWT template.