AutoCAD .NET :: Creating New Drawing File Using Template
Apr 22, 2012How I can create new drawing(.dwg) file using drawing template(.dwt)file in back end (Means with out showing in front end).
View 4 Replies
ADVERTISEMENT
AutoCad :: Creating A Drawing Border Template
Oct 24, 2011Want to create a drawing border, a box on the right hand side containing all the information about the drawing. I want this to be a template so each drawing I create will have the drawing border on the right.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Creating New Drawing With Specific Template
Sep 20, 2013I have some code that starts a new drawing with a specific template from a lisp routine
(defun ghd:load_newdwg (template / ae-acad-object newdwg)
(setq ae-acad-object (vlax-get-acad-object))
(setq newdwg (vla-add (vla-get-documents ae-acad-object) template))
(vla-put-activedocument ae-acad-object newdwg)
)
The template location and file is stored in variable clienttemplate (and is not the standard template path set under options). All works okay except if I close the new drawing, when I return to the previous drawing that was current when the new drawing was created (i.e. the drawing that the routine was run from). I get the following error:
Command: ; error: Exception occurred: 0xC0000005 (Access Violation)
; error: Unknown exception occurred
; warning: unwind skipped on unknown exception
I assume this has something to do with the original routine not closing/finishing before switching to the new drawing. This is the last line of the routine:
(cond ((= startnewdwg 1) (ghd:load_newdwg clienttemplate)))
AutoCAD Inventor :: IPart Drawing Template - One Drawing File Versus Individual Drawings
Jun 21, 2013Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedAutoCAD Civil 3D :: Load Template File At Start-up Instead Of Misc Drawing File
Apr 4, 2012How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies View RelatedAutoCAD 2013 :: Creating Template File For Extracting Information From Blocks?
Jul 7, 2012i want to know how to create template file right from scratch and which format I should use to extract information from blocks and its attributes.
View 1 Replies View RelatedAutoCAD Inventor :: VBA Replace Title Block Definitions In Drawing From Template File
May 7, 2013I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
AutoCad :: Import Layers From A Template To Drawing With Different Template
Jun 9, 2011Can you import layers from a template to a drawing with a different template
View 3 Replies View RelatedAutoCAD Inventor :: Showing Parameters Of Drawing Template On Actual Drawing
Jul 26, 2013I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedAutoCAD Inventor :: Copy Drawing Views To New Drawing Template
Sep 20, 2013I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
AutoCAD Map 3D :: Creating A New Map Template?
Feb 5, 2013I'd like to create a new set of plot templates however, once all the variables are filled in, the 'DRAW LAYOUT' button is still greyed out.
View 1 Replies View RelatedAutoCAD .NET :: Creating A New Layout From A Template?
Jun 28, 2012I have a small project that I'm working on that inserts a new layout based on a user selected template size (A, B, C or D sizes). I need the program to insert the layout along with the titleblock geometry from the existing A, B, C, or D dwt files.
I know how to add a new blank layout. However, I'm having some trouble determing how to insert the titleblock geomtry. I've read a number of posts on here related to layouts, and while they were informative, none of them covered exactly what I need to do.
AutoCAD Inventor :: Creating IDW Template
Jan 6, 2014I'm recently using inventor a lot. But now IM try to make a .IDW template with my own line styles and thickness and stuff. This is what I do:
I open an exciting IDW file. I go to manage and click style editor. Then I create a new style. Called test style. I make sure I activate my new style and I go to layers, where I change the line weight from 0.51mm to 0.25 mm (example)
I save my change and close style editor... After that I save my copy as template (called test 6-1) and close the drawing. I open inventor and create a new file. Select the template I created. I get this style conflict.... I don't fully understand this error... How can I fix this problem?
When my new template opens, I check the line weight by the style editor but the weight detente change... Its still 0.51 mm.
AutoCAD Inventor :: Creating A New Template
May 23, 2013Is there anything wrong with creating a new template this way:
1. Create a new model for a new client.
2. Create new drawing based on the standard template.
3. Bring in model views and create new title block, notes, symbols, etc. specific to new client.
4. Save drawing as a client specific template in my template directory.
5. Open new client template and erase all drawing views but leave notes, symbols, title block, etc.
6. Save.
The question is, doing it this way, will it cause problems? Will the drawing views somehow still be linked to the template? Should I erase the drawing views BEFORE saving as a template? Is there a better way ti create a template?
AutoCAD Inventor :: Creating IDW Template Based On DWG
May 16, 2012I was trying to make new .idw (inventor) templates based on .dwg (autocad) templates. For some reason the type face Simplex is not showing correctly on screen and on print outs. I have checked on various machines and result was same.
View 3 Replies View RelatedAutoCAD .NET :: Creating DWG - Choose Template And Location
Mar 4, 2012How i can create DWG using .Net.
While creating DWG file, i have to choose one of the dwg template and location for created DWG file.
AutoCad :: Creating Custom Sheet Set Template
Jul 2, 2012What I am trying to do is create a custom sheetset template that will have ALL my sheets embedded, that way all my notes, details and sheets will always be ready. I would just need to update some text and details from time to time.
These are the steps that I have taken
Created a new sheetset and called it Sheetset Template
In this sheetset template, I created all my sheets and inserted notes/details.
At this point I thought all I would need to do is copy the sheetset file and all by sheets would get copied too, but that was not the case, just the sheetset file was copied and I have to create all the sheets again.
AutoCAD Inventor :: Creating A Standard (New Project) Template?
Oct 24, 2013Is it possible to set up Inventor 2014 so that a new project will already contain custom libraries?
We have several part libraries as well as material/appearance libraries, and I don't want the users to have to select and add each time the start a new project...
AutoCAD .NET :: Create Drawing From Template DWG
Nov 13, 2012I want to open dwg from template:
DocumentCollection acDocMgr = Application.DocumentManager;
Document acDoc;
try {
[Code]....
But on the line "acDocMgr.MdiActiveDocument = acDoc" AutoCAD is hanging and in around 10 sec AutoCAD closes.
How does the new document from template set active (do current)?
AutoCAD 2010 :: Set Up A Drawing Template?
Jul 19, 2012need to know how to set up a drawing template
View 2 Replies View RelatedAutoCAD LT :: Updating Drawing Template
Feb 25, 2013I seem to recall there is a method of substituting old drawing templates with the latest version on open drawings, but for the life of me can neither remember what the command is or enter anything into the ACAD Help search that results in anything remotely useful .
View 9 Replies View RelatedAutoCad :: How To Change Template Of A Drawing
Dec 4, 2012I drew in the wrong template and now i cant change it.
View 9 Replies View RelatedAutoCad :: New Drawing Template Reload
Mar 31, 2011I think I have erased my template folder. So setting up new drawing has been a problem. Can I load a new template folder?
View 4 Replies View RelatedAutoCad :: Insert Template To A Drawing
Nov 29, 2012I've created a set of templates, A3, A2, A1 A0 etc.
When I open the .dwt at A0 it is fine, the correct dimensions for A0, everything is how it should be.
Now, when I'm in a drawing and go on the tabs, right click, "From Template", select the A0 template and it opens a new tab as normal.
However, the paper size is correct, A0. But the actual frame with the attributes is very small in the cornet, about 25 times smaller, so I'm thinking units, mm to inches, but all the INSUNITS are set to 6.
AutoCAD Civil 3D :: Creating Objects (Feature Lines / Grading) With Naming Template Query
Jun 26, 2012When creating Feature Lines, I wanted them to be e.g. Step Line 1, Step Line 2, Step Line 3 etc so I amended the name template to suit. I created multiple from objects and the naming convention worked. If I did features individually (as I wanted certain ones in certain sites) it worked for the first feature but reverted back to the default Feature line name on subsequent entry to the dialog i.e. it had "forgotten" the template name just set.
Am I missing something to get this to work correctly or is this how it's supposed to work i.e. useless for individual feature line creation?? This also happens for gradings.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD 2013 :: Place And Existing DWG File Into Specific Template File
Jul 15, 2012How can you use a template file from your personal files to use it in an already existing .dwg file.
I knwo how to do it if I start the drawing from scratch and I select that template, but I want to put this existing drawing into my personal template file from my documents.
AutoCAD .NET :: Copy All Objects To New Drawing Template
Nov 10, 2010I've tried this one Autodesk Developer Guide. But it hangs.
What i need to do is copy all objects into a new drawingtemplate and automaticaly run some code over this.
And close the drawing where i started the program.
AutoCAD Inventor :: Updating Of Drawing Template
Oct 5, 2010I have crated a drawing of the part. Now I must be updating the drawing template. How I can update the drawing templates to old drawings?
View 6 Replies View RelatedAutoCAD Inventor :: Logo In Drawing IDW Template?
Dec 12, 2011Still working with INVENTOR 10.
When editing the Title Box in a Drawing Template and attempting to insert a LOGO (bmp file) the logo file justs show an icon for the Logo and not the Logo
AutoCAD Inventor :: Drawing Template Objects
Jun 21, 2013On my company's default drawing template, I have a text block on there with some drawing notes. We often edit some of the notes on the end at each drawing so I didn't create it on the "title block" layer, rather it's on the "top" layer. I also added (in the template) a revision table with Rev. A being "Released for Production" (because we are weird). How can I constrain those on the sheet so when I change sheet size, they stay in the same position relative to the corners of the sheet?
View 1 Replies View RelatedAutoCAD VB :: Edit Dimension In Template Drawing
Jun 22, 2012I need to modify some of the dimensions (text only) in a standard template of outline drawing for different cases. I tried to identify the dimensions which need modification by using handle.
But after that i have no idea how to change the text in it.