AutoCad :: Plotting Drawing Into Prepared Template
Mar 15, 2012
My employer wants me to plot to pdf so they can print it "upstairs".
So I drew a drawing and then opened up the template he wanted me to plot it in and pasted it in there, it was way to big for the template, so I figured I would scale the drawing to make it fit - heres my problem, when I scaled it the hours I had spend dimensioning got scaled as well.
Is there a way to scale without scaling measurements? Or is there a way to alter the template before I start?
View 6 Replies
ADVERTISEMENT
Jun 9, 2011
Can you import layers from a template to a drawing with a different template
View 3 Replies
View Related
Jul 26, 2013
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies
View Related
Jun 21, 2013
Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies
View Related
Sep 20, 2013
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
View 6 Replies
View Related
Apr 2, 2011
I have drawn a 2D 'ruler' 250 units by 50 units and drawn 10mm marks along the edge of the ruler with the last section divided into 1mm marks.
When I plot the drawing, setting the scale in the properties box to 1:1 or 1:2 (or whatever scale I choose) then selecting File, Plot etc, (leaving the scale in the 'Plot Scale' section of the dialog box as shown - normally 1:1) the resulting plot is slightly smaller than expected. What should be say 200mm is more like 199 mm.
I am using AutoCad 2007 and a local domestic type printer (HP type) connected via a USB line.
View 8 Replies
View Related
Nov 13, 2013
I have received a measured survey drawing from a survey that I wish to print out on A3.
The drawing and the title block are both in Model Space. When I measure the structural opening of a door, I found that the dimensions are in meters. On the title block, the denoted scale is 1:100.
I am simply trying to replicate this in paper space in order to print out this plan on A3 paper at 1:100. By the time I have worked through Page Set up Manager and chosen the scale of 1:100, the floor plan inside its border looks like a postage stamp.
I have tried Format > Units and changing the drawing units from unitless to meters but this doesn't change anything. I have also tried scaling the model space drawing x1000 but this makes the drawing too big in paper space at 1:100.
View 3 Replies
View Related
Dec 20, 2013
When I plot my Autocad drawing, arrows (see attached image) arrow.jpgpop up. I'm pretty sure they are coming in from one of my architecture x-ref files, but as they only pop up when the drawing is plotted, I cant seem to figure out how to turn them off.
View 2 Replies
View Related
Jun 22, 2012
With regard to line thickness, which takes precedence when plotting a drawing, the layer lineweight (in layer properties) or the line colour assignment (in plot styles)?
View 1 Replies
View Related
Feb 6, 2013
is it possible, when you insert a pdf into a drawing for not plotting the boundaries of this pdf?
View 7 Replies
View Related
Nov 8, 2012
In my company they draw out multiple pages of construction drawings in 1 file. They do all their sketching off to the side and then bring the finish detail onto the sheet that will be plotted out later.
They then start a new sheet below it and continue onward until they have 20 plus drawings in one DWG file.
What I want to do is print each drawing individually to whatever plotter or printer I set up. I can't batch file as I understand it because there are so many pages of a print in 1 drawing. Because all the DWG file has multiple pages I have to go thru several windows to get each page plotted out.
Is there a script or batch file that I can use that I can set up the plot and then for example highlight the page I want to send to the printer then go to the next print, highlight it and it gets sent to the printer without having to set up the plot again?
We use Autocad 2000 so I am working with a basic set up here without a lot of frills the later versions have. I am trying to get them to seperate the pages but that isn't working for the earlier drawings they have done.
View 9 Replies
View Related
Apr 1, 2012
When I plot to PDF using DWG to PDF.pc3 the drawing appears to be washed out, some things are darker than others. I am using Autocad 2011 and Adobe Acrobat 9 and 10.
I do not have this problem when I print from Autocad 2009 .
As I am working on a project this evening, at home, and only Autocad 2011 here, and Adobe Acrobat 10.
My plot setting are identical in 2011 as they are in 2009.
View 5 Replies
View Related
Nov 20, 2013
When i try and plot my 3D model in the Hidden style, so it simply looks like a black line drawing the plot comes out weird. The plot for some reason adds a thick black line around my entire plot, and makes all the other lightweights look faded out. How can i fix this??primary bar 3-Layout2.pdf
View 1 Replies
View Related
Dec 11, 2013
I have a question I have a logo that we use the color 5 Blue in when we print to the copier it prints exactly, but when we plot the same drawing to the plotter the the color looks like a purple shade instead of a Royal Blue.
View 6 Replies
View Related
May 4, 2012
I have a plotting issue I cannot resolve. Basically, my plotter is not plotting some bits of a drawing. Usually it just cuts 20% of it, sometimes it just doesn't plot some random objects.
View 3 Replies
View Related
Nov 13, 2012
I want to open dwg from template:
DocumentCollection acDocMgr = Application.DocumentManager;
Document acDoc;
try {
[Code]....
But on the line "acDocMgr.MdiActiveDocument = acDoc" AutoCAD is hanging and in around 10 sec AutoCAD closes.
How does the new document from template set active (do current)?
View 5 Replies
View Related
Jul 19, 2012
need to know how to set up a drawing template
View 2 Replies
View Related
Feb 25, 2013
I seem to recall there is a method of substituting old drawing templates with the latest version on open drawings, but for the life of me can neither remember what the command is or enter anything into the ACAD Help search that results in anything remotely useful .
View 9 Replies
View Related
Dec 4, 2012
I drew in the wrong template and now i cant change it.
View 9 Replies
View Related
Mar 31, 2011
I think I have erased my template folder. So setting up new drawing has been a problem. Can I load a new template folder?
View 4 Replies
View Related
Nov 29, 2012
I've created a set of templates, A3, A2, A1 A0 etc.
When I open the .dwt at A0 it is fine, the correct dimensions for A0, everything is how it should be.
Now, when I'm in a drawing and go on the tabs, right click, "From Template", select the A0 template and it opens a new tab as normal.
However, the paper size is correct, A0. But the actual frame with the attributes is very small in the cornet, about 25 times smaller, so I'm thinking units, mm to inches, but all the INSUNITS are set to 6.
View 3 Replies
View Related
May 27, 2013
I'm trying to import a ploting style from one of the drawing to another from my AutoCAD LT 2012.
View 3 Replies
View Related
Mar 2, 2012
I am on a 64 bit Windows 7 HP computer with AutoCAD 2010, and I am having a problem plotting a long (24" X 190") drawing file. We have a RICOH Aficio MP W3600 PS plotter. I have gone through the proper procedure through the Plotter Manager all the way to Select Custom Paper Sizes but the Add button is grayed out and I can't add a new user size. I was able to do this with AutoCAD 2004 on a Windows XP system but can't on this setup.
View 1 Replies
View Related
Mar 3, 2013
when I try and plot drawings from autocad I only get half the drawing, sometimes just a strip of blank paper. This is for standard A0 drawings and custom oversized drawings. Plot preview is fine, the same drawings can be plotted by my 2 collegues. We all have the same computer specs, same program, same drivers, as a department we had new computers about 3 months ago. We use 2013LT. I can plot the drawings but it means using True View to open and plot the drawings (same computer, same drivers, but it works) I repeatedly asked our IT department and finally got them to look at the computer, the answer was "yeah, your right it doesn't work".
Autocad 2013LT
Windows 7 professional
View 5 Replies
View Related
May 15, 2012
Im having an issue with drawings plotting too light in AutoCAD 2013. Polylines with a specified thickness of 1/32" will print dark, but the rest of the drawing is almost unreadable because it is too light. "Plot with Plotstyles" is selected
I can use 2009 to print, which is also installed on my machine, and the drawing will print as intended.Using the same plot style, same settings in both.
View 1 Replies
View Related
Nov 27, 2013
I'm trying to print off an installation drawing which has some conduit running down through a wall. What I want is to show the conduit in the wall as a hidden line but I'm not able to do so. I'm using AutoCAD 2013.
View 4 Replies
View Related
Dec 11, 2012
i have a drawing from a client that is in metric and i need to print the drawings in inches in 1:1 for my boss. i should know this but it seems to be a bigger problem than i thought.
View 9 Replies
View Related
Nov 10, 2010
I've tried this one Autodesk Developer Guide. But it hangs.
What i need to do is copy all objects into a new drawingtemplate and automaticaly run some code over this.
And close the drawing where i started the program.
View 9 Replies
View Related
Oct 5, 2010
I have crated a drawing of the part. Now I must be updating the drawing template. How I can update the drawing templates to old drawings?
View 6 Replies
View Related
Apr 22, 2012
How I can create new drawing(.dwg) file using drawing template(.dwt)file in back end (Means with out showing in front end).
View 4 Replies
View Related
Dec 12, 2011
Still working with INVENTOR 10.
When editing the Title Box in a Drawing Template and attempting to insert a LOGO (bmp file) the logo file justs show an icon for the Logo and not the Logo
View 3 Replies
View Related
