AutoCad :: Multiple Plotting Of Different Sheets In 1 Drawing
Nov 8, 2012
In my company they draw out multiple pages of construction drawings in 1 file. They do all their sketching off to the side and then bring the finish detail onto the sheet that will be plotted out later.
They then start a new sheet below it and continue onward until they have 20 plus drawings in one DWG file.
What I want to do is print each drawing individually to whatever plotter or printer I set up. I can't batch file as I understand it because there are so many pages of a print in 1 drawing. Because all the DWG file has multiple pages I have to go thru several windows to get each page plotted out.
Is there a script or batch file that I can use that I can set up the plot and then for example highlight the page I want to send to the printer then go to the next print, highlight it and it gets sent to the printer without having to set up the plot again?
We use Autocad 2000 so I am working with a basic set up here without a lot of frills the later versions have. I am trying to get them to seperate the pages but that isn't working for the earlier drawings they have done.
View 9 Replies
ADVERTISEMENT
Sep 21, 2011
We use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
View 6 Replies
View Related
May 10, 2011
Our current setup is like this. We plot our plan sheets (ARCH D/ARCH E) from paper space. There are typically 2 to 10 of these sheets.We plot our plant production sheets (Legal size sheets) from model space. There can be anywhere from 10 to 500 or even 1000 of these sheets. These can be cumbersome to print as we click previous plot and select a window around each new sheet we print.
How to be able to print multiple sheets in model space with one click as long as it had a certain title block rectangle around it.
View 9 Replies
View Related
Feb 13, 2013
I would like to use the plot function to generate 3 individual PDFs from a 3-sheet idw in Vault.Requirements:
1. Each PDF needs to be named after a certain field that is already populated in iProperties
2. All PDFs need to be output to a fixed folder in Vault
I have tried some iLogic codes and indeed it is possible to do that from within Inventor. But should we need to print a large number of idws that will be a nightmare for me.
View 1 Replies
View Related
Mar 15, 2013
From all our parts of an assembly we made 1 IDW with multiple sheets. Now we want to convert this IDW to PDF's and in such a way that we have one PDF for each sheet, and each PDF files needs the same name as the sheet.
View 5 Replies
View Related
Jan 31, 2013
I'm trying to find a way to plot multiple (over a thousand) DWG files to PDF without doing each one manually. I've played around a little bit but without any luck. I'm using AutoCAD 2002 LT. Is there any way to do this?
I've also got little to no experience with the more complex settings and abilities of autocad so do so in laymans terms.
2002 lt has no general publish (only publish to web) option and how sheet sets work.
View 4 Replies
View Related
Jan 24, 2013
I have to two sheets layed out in one drawing in Auto CAD 2012, a tilte sheet and the building plan. How can I send that to one PDF file (one PDF file with both sheets) using the 'DWG to PDF.pc3' option?
View 5 Replies
View Related
Jan 16, 2013
I am a AutoCAD LT 2012 user. How do i publish transparent stamp in multiple sheets?
This "plot transparency" check box only appears in "PLOT" printing and not in "PUBLISH"printing.
View 7 Replies
View Related
Mar 13, 2012
I am creating plan sheets and using the sheet creation tool. The plan sheets I am looking to make have stacked view, similar to a plan and profile sheet, only they have the horizontal alignment in both views.
I have a template set up with two viewports, but when I try to create the sheets it puts the same view frame in both of the viewports. Is there any way to set this template up so that I can have, lets say, STA 100+00 - 110+00 in the top viewport and then STA 110+00 - 120+00 in the bottom viewport. I understand that I can move the viewports once they are created, but I would rather have that done automatically. I am not sure if what I want done is possible with Civil 3D.
View 3 Replies
View Related
Nov 20, 2013
is it possible to do an individual revision table for multiple sheet drawings. if you typed in description 'sheet 3 nut changed from m3 to m5......etc' then all the bunf would carry over to every sheet
View 1 Replies
View Related
Aug 15, 2012
I've got a drawing that is 14"x12" and have a printer that can only handle 8.5 x 11 sheets. I need to print it out full scale because I plan on using the drawing to cut something out. In school, I have seen my teacher print the drawing across multiple sheets, and then he simply tapes the sheets together. I have tried every configuration possible and have had no success.
View 1 Replies
View Related
Dec 14, 2011
How to save IDW's with multiple sheets in to 1 single CAD file
I have IDW's whith lots of sheets and when saved to cad, I got multiple files and I always end up doing copy paste to create a single file
View 5 Replies
View Related
Feb 20, 2013
I am using Rel. 2012. I would like to hear what some of the practices are regarding a general note used on multiple plan sheets. What I have is a plan set with 150 sheets. On each sheet a general note is required that likely will be revised by agencies reviewing the plans. Currently I have a base cadd file with the note and I x-ref that drawing into each sheet.
View 4 Replies
View Related
Jan 25, 2012
How to open multiple sheets using sheet set manager? In our office we have some machines that do and some that don't. Is there a variable to change? I know its possible I just don't know how to do it.
View 9 Replies
View Related
Dec 31, 2013
I'm having an intermittent issue with my publish command. So far the pattern seems to be on drawings with a larger number of sheets (last one was 15, this one is 7). When I get the publish dialog box, I'll set the number of copies to however many I need but it ends up only printing one set. It doesn't happen every time. Just with these two drawings so far. They have nothing to do with each other and haven't shared any data. The only similiarity is that they're both older projects that were started some years ago on previous CAD versions.
View 7 Replies
View Related
Jun 21, 2012
We often have drawings with multiple sheets.Usually the first couple of sheets are devoted to identifying components and where they should be placed. The remaining sheets provide details on specific components (dimensions, tolerances, etc.).
It would be nice to be able to reference (associatively) other sheets, so it is easy to find information on a component when looking through the drawing package. For example, add a note that says "See sheet 12", and have the 12 update if that sheet (or drawing view?) changes location in the package.
View 2 Replies
View Related
Jul 23, 2013
I would like to change the way a linetype appears for a specific part, globally throughout my drawing package. How is this done?
I am currently selecting the part in the model tree in the browser and changing it that way, but I have to do it on multiple views, for multiple pages .
View 2 Replies
View Related
Jan 18, 2012
Is there a way in Inventor 2011 to automatically copy a parts list from an assembly on sheet 1 to the other sheets in a drawing? We generally have large assembly drawings with the same assembly spread out over several sheets and have to create a new parts list and update it separatly on each sheet. We also have this issue with revision information which we store in a symbol but parts lists are more prevelent of an issue.
View 1 Replies
View Related
Feb 16, 2009
When using the publish command to print multiple sheets from Civil 3D, it will sometimes fail to print certain objects. Usually it is a profile. Occasionally it drops some of the pipes. When we plot sheets individually it plots fine. Only C3D objects are affected, not regular ACAD objects. It only seems to be pipes and profiles. This problem is sporadic. It may be drawing specific but the sporadic nature of it makes it hard to say for sure.
The way we set up our drawings, profiles and pipes are almost always DREF's. This appears to be related. If we creat a test drawing with everything in one drawing publish works fine. If we then seperate into two drawings, DREF the data, and then publish again, the pipes disappear (from the plot not the drawing itself).
The same problem occurs on two different printers so I don't think it's driver related.
It started happening when we were on 2008. I thought maybe it was just that version. However, it seems to have gotten worse in 2009.
View 8 Replies
View Related
May 3, 2013
When creating plan and profile sheets with multiple alignments in the view, what is a common practice in civil 3d?
- Data shortcut all alignments that are in the view into the plan and profile model
- Create a dwg that has all the alignments data shortcutted and xref that into the plan and profile dwg
- Create a dwg for each alignment and xref into an overall alignment dwg via attach and then xref the overall into the pp sheets dwg model.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 2 Replies
View Related
Apr 24, 2013
the only property I can actually define for each individual sheet (for use in iLogic, text fields, etc.) is the sheet name. This is extremely limiting. Each sheet in my drawings has several properties of its own--sheet number (most importantly), what part is ON the sheet, the designer, the revision, etc. I would love to be able to use each of these in labels on the sheet, for example, a text box with "<Sheet #> - <Part> (<Designer>)". The only possible way I could do something like this is to use the sheet number as the Sheet Name, and then use that value in the sheet's text labels, headings, and title block. However, I want to be able to use descriptive names for the Sheet Name, plus that's just one property.
Is there any way I can create and define multiple custom properties for individual sheets? I was exploring the idea of using iLogic, using the ActiveSheet command, possibly, and "tricking" inventor into creating properties for a given sheet.
View 8 Replies
View Related
Aug 15, 2012
Working in an idw file, I have a need for two drawing sheets with the identical views of the same part. However, each sheet will need different dimensions and annotations. What I would like to do is after completing one sheet, in one step create the second identical sheet, then just edit/add dimensions and annotations. Is there a method to do this? So far, I have only been able to copy one view at a time from sheet to sheet.
View 2 Replies
View Related
Nov 5, 2012
I have an assembly drawing made with 2 parts in it. I have the assembly drawing as Sheet 1 and each part also in the file as Sheet 2 and Sheet 3. What I have a problem with is that when I change or update the original files for Sheets 2 and 3 it doesn't update the sheets in the assembly drawing. Is there a way to keep these files connected. I need to have the standard sheets for filing and part designation, but when production call for the assembly to be needed, the assembly (Sheet1) with the Attached part drawings (Sheets 2 & 3) hit the production floor. Without them linked a mistake will be made. There are to many engineers in my department and we all make production changes to parts and if they are not linked bad things will happen. I am just trying this out, we have a lot of assemblies that will be great for the production if I can get all the part and assembly files to work together and print at the same time from on file.
I am using Inventor 2012 if that matters.
View 7 Replies
View Related
May 26, 2013
Example for creating layouts for the zoomed portion in the model space.. Im able to zoom the drawing sheet but im not able to create layout for that sheet..See my attachment ..i created layouts manually(layout1,layout2,layout3)....But i dont know how to do this in .net API.
View 1 Replies
View Related
Oct 21, 2011
how can I copy inventor drawing sheets? I don't want write everything again. It must be a way.
I use inventor 2012.
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
View 6 Replies
View Related
Aug 28, 2012
I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?
View 9 Replies
View Related
Jan 3, 2013
Is there a way, in my drawing template, to set one field as "Part Number iProperty from parent assembly on sheet 1 base view"? I want every single sheet in my .idw to reference the same "Part Number" iProperty from the assembly in the base view of sheet 1.
View 2 Replies
View Related
Jan 10, 2013
I new to using the view frame groups we do allot of double plan view 11x17 sheets using an alignment on top of MrSid aerial drawings. It is very time consuming to setup the viewports along the alignment doing the old fashion method of copying the page setup and sliding the model space along the alignment for the next sheet. I understand the plan profile and cross section methods of creating multiple sheets and how the viewframe group works for those type of sheets. I'm just not sure how to create a dwt template for one plan view on top of another plan on the same sheet with to viewports. I know I'm not the only person that creates road cl double planviews when your not concerned about a profile.
View 3 Replies
View Related
Apr 23, 2012
What I need to know is, will the drawing sheets/titleblocks attributes etc, I have created to insert in AutoCAD work in Civils 3d or will i need to create separate ones.
View 4 Replies
View Related
Dec 27, 2013
I've created a couple of programs:
One - that will start a new project file, add our standard drawing sheets
two - Insert a bunch of wblocked components based on user input
programs 3 - 6 all do the same as program 2, just different components for different sheets.
I can run all these programs and they work (i need to do a lot of "clean-up" but they work)...
I have them set-up to open the next drawing.But i have to type in the next command, and continue until all my programs and done running.
My questions is how can I accomplish this without having to continually type in commands?I can't run these as a script, but is there another method?
View 8 Replies
View Related
Apr 3, 2012
How to automatically print the layers of a drawing in separate sheets in one go?
I wanted to print the layers of a particular drawing each in separate sheet but wondering if there might be an automated way to do so. For example, if I a particular drawing comprise 15 layers then how to print each one of these layers in a separate sheet.
Sure, there might be more than one way to achieve this (like controlling the “plot” feature on the “layer properties manager” but what I’m looking for is an automated way to print all the 15 layers separately in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
