How to open multiple sheets using sheet set manager? In our office we have some machines that do and some that don't. Is there a variable to change? I know its possible I just don't know how to do it.
View 9 RepliesI am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedHow do I get my Sheet Set Manager to open up each time I open a CAD drawing? I turned it off and can't remember how to turn it back on. I use command SSautoopen, set to 1 but doesn't alway work. Sometimes if I close AutoCad and reopen it I can got to drop down menu and click on .dst extension and it will open but if I close out of it it won't open again unless I restart AutoCAD. I thought I used a command from the Express Tool menu but can't find it.
View 3 Replies View RelatedI have been using the sheet set manager with very few problems for years until - you guessed it - I was upgraded to Windows 7 OS v6.1 and Civil3D 2012 IDS.
Up until then, I was able to open layouts in different drawing files through the sheet set manager while in an open file. Now, I get an error message (see attached) and have to close the file I'm in to open the other.
I can open files through the regular file open command and have more than one open at the same time, but it takes away the convenience of using the sheet set manager to avoid having to browse to the desired sheet layouts when copyclipping sheet layout drawing elements from one file to another.
I have studied every sheet set system variable to see if that was the problem, but could not find an answer. I have the same problem in Civil3D 2010. It happens to new and existing sheet sets in both versions and sheet sets made before the Windows update.
is there a way to renumber sheets in the sheet set manager? i've got over 100 sheets and i need to insert some new sheets in the middle. there wasn't a way in 2009 but i was hoping for something in 2012. it seems like something that would be included by now.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
In fact, some of the things I've found online refer that you cannot automatically replace entire Titleblock Templates for existing Sheets in the Sheet Set Manager. So, here's my question:
Can you replace all existing Sheets in a Sheet Set with an entirely new Template file automatically, without opening each Sheet and re-inserting the Title block?
Example:
Let's say I have a Sheet Set. Inside the Sheet Set, I already have 20 sheets created. I then realize that my Template file is missing our company logo. I then have to open the Template file and insert my company logo. Well, this works for all newly created sheets from that point forward, but how can I get this change to automatically populate in the existing 20 Sheets that are already in the Sheet Set?
How people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
When I try to select the folder where my drawings are located SSM is only showing me 2 of the 3 drawings located in that folder. I have not had any problems with other folders. I even tried moving the drawing file to a different folder, but SSM still does not add it to the sheet set list. I have tried re-booting and nothing.
View 2 Replies View RelatedEvery time I try to select the text of an item in the open recent list the recent list will disappear before I can select it. I've discovered that I must carefully move my mouse pointer down the left column that precedes the entries in order to select any of them. Autodesk, could you fix this so that anywhere on each item is selectable and the recent list stays open until the mouse moves off of it?
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
In ACA 2012 there was a nice feature that did the following:
When you finished creating a new Sheet Set in the SSM, it would then immediately open the new Sheet Set in the SSM. (a few seats of ACA 2012 were in use in the office) In ACA2011, it didn't do this. You had to browse for the newly created .dst file to open it. (I was using ACA 2011 at the same time as those others were using ACA 2012).
Now we've all upgraded to ACA 2013 in the office. However, that nice little feature appears to be gone again. Any way to turn that back on in ACA 2013?
I have an issue with Sheet Set Manager Locking the .dst file to one user, others can only open the file read only.
I am working on a network that uses Linux.
I have been using sheetset manager for several years and think its great but this causes a problem on large projects that need to have multiple users.
The below is an interesting link that i have recently become aware of but it doesnt say whether this fixed the issue or not.
[URL] ....
I have this problem logged with Autodesk but I have not got anything definitive.
I have set up a title block template I plan to use for ALL of my drawings.
I fallowed this website and PDF file at bottom: [URL]......
Great resource and very good explanation step by step which was what I was looking for; the problem I'm having is all his files are set up specifically for one project and I'm having difficulty setting it up for me.
I have everything finished but when I open my project .dwg file and SSM then new SSM file from template and customize the options everything looks fine however when I go to open a new sheet; yes it does open the template .dwt file however it completely open the whole .dwg file of the template so my viewport is the template viewport not my project .dwg file......
How do I get SSM to open new layout/paper spaces with the title block template but the viewport of my current project .dwg file.
I have to two sheets layed out in one drawing in Auto CAD 2012, a tilte sheet and the building plan. How can I send that to one PDF file (one PDF file with both sheets) using the 'DWG to PDF.pc3' option?
View 5 Replies View RelatedIt been a while since I did this and I getting something wrong. I want to add custom SS field to my TB which I have created in SSM, but when I edit the block to add the custom field to an attribute default the list is empty.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
I have had an issue where my text field shows up as "####" even though the the value is still showing up in the custom properties menu. I've tried updating the field and re-inserting the field and it keeps showing up as "####"
View 1 Replies View RelatedI am using Rel. 2012. I would like to hear what some of the practices are regarding a general note used on multiple plan sheets. What I have is a plan set with 150 sheets. On each sheet a general note is required that likely will be revised by agencies reviewing the plans. Currently I have a base cadd file with the note and I x-ref that drawing into each sheet.
View 4 Replies View RelatedIs there a way to set the sort order in Sheet Set Manager for the Model Views tab? Seems like a few releases ago it was alphabetical - now its random and almost impossible to locate a specific drawing in a large project.
Tried changing MAXSORT and it did not have an effect.
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
View 7 Replies View Related1.what command open the Dimension style Manager ?
Ans- a)DSM b) DS c) DIMSTYLE d) DDIM.
Have created 3 sheet sets. Like to create a sheet set with all 3 and still keep the original 3 sheet sets.
View 2 Replies View RelatedI'm trying to set up a title block template that will be used between several different sheet sets. I have entered the custom properties, then when I go to the title block and try to insert the fields with current sheet set custom the drop down box is empty and then when I try to type in the custom property name the link still does not function. Is there some trick that I'm missing, or is this function broken on AutoCad 2013?
View 6 Replies View RelatedI'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
I was creating a new sheet set in the sheet set manager as I have created new drawings to be added to the old one. When I do this and browse to the directory of drawings, once I hit next it only wants to create a sheet with a few drawings in the directory. There are 22 drawings in the directory and is leaving out about 18 when it creates the sheet set.
View 2 Replies View RelatedI am trying to create a sheet set with sheet set properties for title blocks but every time I close sheet set manage I lose the properties I typed in .
View 1 Replies View RelatedI am using the Sheet Set options to creat my Sheet Index. It imports everything just fine. My issue is when I want to create a space between sections the option to add a row is greyed out. For ex I would like my sheet index to look similer to the following
S1.01
S1.11
S1.41
S2.01
S2.03
S3.01
ETC.
Is there a way to do this using the sheet index option in Sheet Set manager?
I've been having a weird issue that certain layers of a CAD drawing won’t print if that sheet is open, but it will print perfectly if another sheet is open. Using AutoCAD 2011 SP2 on a Windows 7 64bit PC with 8GB of memory and an I7 processor.
View 1 Replies View RelatedFrom all our parts of an assembly we made 1 IDW with multiple sheets. Now we want to convert this IDW to PDF's and in such a way that we have one PDF for each sheet, and each PDF files needs the same name as the sheet.
View 5 Replies View RelatedI am frustrated at the design of sheetsets. There is no way to "lock" sheets to a particular sheet set.
When I have a sheet open with a sheet set verything is great but, if I close that sheet and open another w/o closing the sheet set, the new dwg will associate all of its fields with the other sheet set. Is there a way to lock the sheets with a sheet set? OR is there a way to automatically close a sheetset that is associated with a a file or files when they are closed?
Is there any easy way to have sheet name automatically pull the "description" iProperty from the part that is on the sheet? It can be very handy in a multi-sheet drawing for each sheet to have a descriptive name in the browser, but the only way to do this (that I know of) is to manually change it.
View 5 Replies View RelatedI need to rename the sheets of a multiple sheet idw. This should be easy but for some reason I cannot change the sheet names. I get no errors it just does not change. Here is the VBA
'Open drawing document
Set oDrawingDoc = ThisApplication.Documents.Open(sPath, True)
'Set the sheets collection
Set oSheets = oDrawingDoc.Sheets
'Cycle through sheets
For Each oSheet In oSheets
[code]......
The most annoying in the style sheets, view manager since x3 is still existed in the x6 as style sheet sets having unnecessary styles which i have not created besides color styles & view manager as well. Are they not considered anyhow ?
Default style set is ok and Styles is also ok to create our own but Why this nuisance of style sets which are having a lot of dump. Truly view manager is unnecessary docker i think but have lots of zoomed data.