Is there any easy way to have sheet name automatically pull the "description" iProperty from the part that is on the sheet? It can be very handy in a multi-sheet drawing for each sheet to have a descriptive name in the browser, but the only way to do this (that I know of) is to manually change it.
View 5 RepliesI need to rename the sheets of a multiple sheet idw. This should be easy but for some reason I cannot change the sheet names. I get no errors it just does not change. Here is the VBA
'Open drawing document
Set oDrawingDoc = ThisApplication.Documents.Open(sPath, True)
'Set the sheets collection
Set oSheets = oDrawingDoc.Sheets
'Cycle through sheets
For Each oSheet In oSheets
[code]......
I am trying to find an automated way to rename multiple sheets when creating Inventor drawings.
I have an Inventor assembly, and I need to create a drawing for each component in this assembly. I have one Inventor Drawing with multiple sheets in it. Each sheet is for each part in the assembly.
I would like to loop though each sheet and rename the sheet name to the Part number of the part. Is there a simple way to do this though i Logic? And how would I go about doing something like this?
I'm trying to unskillfully crash my way through writing a VBA program for modifying Inventor drawing border info, and have managed through cannibalizing other programs to achieve 95% of what I wanted (ie the iproperties part).
Prompted Entries via VBA..I'd like to create a sync 'Prompted Entries' from sheet 1, across all sheets button.
The 4 prompted entry fields are always..I'd love some VBA code that could read the above 4 Prompted Entry values from Sheet:1 and then sync these values across multiple drawing sheets within one .idw file if more than one sheet was present.
Our configuration management tool requires a DWG for our system assembly drawings. A single DWG with all the sheets layed out in a sheet space. Right now I do a "Save As" out of inventor and it creates X number of seperate DWG files and then I stitch them together in AutoCAD by taking each sheet and placing them into a single sheet space (copy paste). My work flow would be much faster if I could get Inventor to create a single sheet space with all the active or selected sheets as a single DWG output.
View 4 Replies View RelatedI've been try to use the Multi Sheet Plot routine that's provided with the Inventor 2014 install.
I'm attempting to plot both Vaulted and Non-Vaulted idw and Inventor .dwg files.
Regardless of drawing type or location, the Multi Sheet Plot routine is unable to print any files. The application reports a failed while reading error. None of the settings within the application seem to have any effect on eliminating the read file errors.
What steps must I follow in order to successfully print multiple sheets of a designated printer?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014
we have simple assemblies with bolted weldments and few misc. parts. most assemblies are 3-20 parts a typical project would have:
-a few laser cut parts, some plastic and hardware. these items need to have part drawings sent to a vendor.
-some in house cretaed parts that need a drawing
-assembly drawing for our shop
i think i am seeing that by having one single IDW its getting hard to send all the drawings to the people that need them. an example would be if a vendor calls about one part, i may send him a 4 page PDF and tell him to look on sheet 2.the other issue that i have is that my standard work flow is:
-design a product
-hand of to another dept for them to enter SKU numbers for parts and assemblies.
so my file names never match what the final product name is. i have been using fields in the iPROP, but it would be nice to revise file names when SKUs are created. im guessing vault would be the tool for something like that?
Version: ACAD2009
Have a bunch of DWFs (because it's smart!), but company Netbooks assigned to Techs are Linux-based...Autodesk still won't support Linux w/DesignReview and company won't use FreeWheel (proprietary info, security, etc.).
SO, is there a FREE way to convert a DWF into a PDF, keeping the multi-sheets, and is there a way to batch convert? I'm a crybaby so I'd rather not have to go back through hundreds of DWGs to re-plot. (...although...I *do* get paid by the hour...!...nah...can't in good conscience not look for a smarter way!)
I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
INV 2013
shouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
I am frustrated at the design of sheetsets. There is no way to "lock" sheets to a particular sheet set.
When I have a sheet open with a sheet set verything is great but, if I close that sheet and open another w/o closing the sheet set, the new dwg will associate all of its fields with the other sheet set. Is there a way to lock the sheets with a sheet set? OR is there a way to automatically close a sheetset that is associated with a a file or files when they are closed?
is there a way to renumber sheets in the sheet set manager? i've got over 100 sheets and i need to insert some new sheets in the middle. there wasn't a way in 2009 but i was hoping for something in 2012. it seems like something that would be included by now.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
How to open multiple sheets using sheet set manager? In our office we have some machines that do and some that don't. Is there a variable to change? I know its possible I just don't know how to do it.
View 9 Replies View Related In fact, some of the things I've found online refer that you cannot automatically replace entire Titleblock Templates for existing Sheets in the Sheet Set Manager. So, here's my question:
Can you replace all existing Sheets in a Sheet Set with an entirely new Template file automatically, without opening each Sheet and re-inserting the Title block?
Example:
Let's say I have a Sheet Set. Inside the Sheet Set, I already have 20 sheets created. I then realize that my Template file is missing our company logo. I then have to open the Template file and insert my company logo. Well, this works for all newly created sheets from that point forward, but how can I get this change to automatically populate in the existing 20 Sheets that are already in the Sheet Set?
Is there a way to generate the station ranges for each sheet title block when generating sheets? It seems like there should be some sheet set manager variable for it or something but I haven't been able to find it.
View 8 Replies View RelatedWhile publishing several drawings I am having problems creating Single Sheets, (a customer preference). Even though I have the Multi-sheet/Single-sheet setting set to "Single" Autocad still creates a multi-sheet PDF. I am using Autocad 2012.
View 3 Replies View RelatedI changed my Publish options on the Project Navigator for publishing to PDF as a single sheet per sheet layout. Now I want to put it back so that when I publish it does ALL sheet into one PDF file and I can not figure out how to put it back. Now ever time I publish it does each sheet as a separate pdf.
View 5 Replies View RelatedI have found that if you publish to single-sheet .pdf's and then combine the .pdf's into one file using Acrobat, each sheet is bookmarked using the name of the individual files for the bookmark names. However, if you publish to a multi-sheet .pdf, no bookmarks are created. Is there any way to create multi-sheet .pdf's in AutoCad and have bookmarks automatically inserted (using the name of the layout as the bookmark name)?
View 3 Replies View RelatedWe have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
is it possible to simply rename a part?
I quite often make up quick parts to try stuff out and call them random things but if I want to change the name it is not just a simple case of renaming the part as a few things need updating.
is there a simple quick way to rename a part in one hit without going through other stuff?
When I construct a multi image contact sheet and send it to my printer the file is aborted. Mac Pro, 15 GB ram, OSX 10.6.8, Epson 7890. LR4.
View 2 Replies View RelatedURL....I need to copy one entire project and then rename them all, it has about 1500 parts/assys that I need to rename.
Instead of renaming all items of my project, one by one using Design Assistant, could I just make some kind of rule that renames all the parts/assy's in my project, and then update its PART NUMBER too ?
because my register code is something like this : TAG-0000-0000-00, and the only thing that's gonna change its the string TAG, nothing else. I could try to change only the first 6 that are the TAG, but this sequence of rename/open/update, how to make, and even if that's possible. Or maybe have any other specific tool to rename things this way instead of Design Assistant ?
I am using Design Assitant to rename files, but have had no luck with other referenced files.I have followed the Procedures from AutoDesk WikiHelp.
1. Open Top Assembly.
2. In the top browser, I select the part and set Action -> Rename.
3. Rename File.
4. In the bottom browser, I select the file types for additional referenced files.
5. I select (highlight) all the files.
6. Click "SAVE"
When I go to open the files, to check if the changes have been made, obviously to rename works on the Top Assembly,BUT for other additional referenced files, it doesn't.
I am doing this in a Single User Project.Just wondering if there are other steps that need to be done to use Design Assistant properly.
where to find a tutorial that explains the usage of Design Assistant? Particularly the practice of renaming assemblies and linked parts?
View 4 Replies View RelatedI have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies View RelatedA collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedI want to duplicate & then rename a project I have stored on my vault computer, However I am experiencing many difficulties.
There are probably around 1000 + files in this project-multiple assemblies/drawings & parts. Initially i did a Pack & Go of the Project to my desktop. I then took my first top level drawings & using Design Assistant renamed all the reference parts and assemblies related too it. This worked fine, albeit a very long time to rename all the files.
The problem is that i have say 50 drawing files, some contain similar assemblies/part files which will have already been rename in the first top level drawing & some container different assemblies/parts (which are not related to the first top level drawing) & will have to be renamed separately.
Is there an easier way to duplicate & rename a vault project because design assistant makes this task extremely laborious. An great tool to add would be to 'Find & Replace' a file name & apply it too all the files. Similar to the function in Microsoft Word.
I have looked into the copy design feature in vault however, you can only copy a project within a project, you cannot copy it to a completely new folder in the vault.
The other problem is, is that you can only add a prefix or suffix to every file/related part/assembly, & i would rather replace the project number rather then add the new project number to the file names. This would be a viable option if you could rename multiple files quickly, however this just stems back to the design assistant.
The following code crashes with an exception at the point where I try to rename the extrusion feature:
CComPtr<ExtrudeDefinition> pExtrudeDef;
hRes = pListOfExtrusions->CreateExtrudeDefinition(pProfile,kCutOperation,&pExtrudeDef); pExtrudeDef->SetDistanceExtent(_variant_t(kHeight),kSymmetricExtentDirection);
[Code] ......
Is it possible to rename an extrusion feature. If so what is the method to do it?
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
View 1 Replies View Related