Our configuration management tool requires a DWG for our system assembly drawings. A single DWG with all the sheets layed out in a sheet space. Right now I do a "Save As" out of inventor and it creates X number of seperate DWG files and then I stitch them together in AutoCAD by taking each sheet and placing them into a single sheet space (copy paste). My work flow would be much faster if I could get Inventor to create a single sheet space with all the active or selected sheets as a single DWG output.
Is there any easy way to have sheet name automatically pull the "description" iProperty from the part that is on the sheet? It can be very handy in a multi-sheet drawing for each sheet to have a descriptive name in the browser, but the only way to do this (that I know of) is to manually change it.
I need to rename the sheets of a multiple sheet idw. This should be easy but for some reason I cannot change the sheet names. I get no errors it just does not change. Here is the VBA
'Open drawing document
Set oDrawingDoc = ThisApplication.Documents.Open(sPath, True)
'Set the sheets collection Set oSheets = oDrawingDoc.Sheets 'Cycle through sheets For Each oSheet In oSheets [code]......
I've been try to use the Multi Sheet Plot routine that's provided with the Inventor 2014 install.
I'm attempting to plot both Vaulted and Non-Vaulted idw and Inventor .dwg files.
Regardless of drawing type or location, the Multi Sheet Plot routine is unable to print any files. The application reports a failed while reading error. None of the settings within the application seem to have any effect on eliminating the read file errors.
What steps must I follow in order to successfully print multiple sheets of a designated printer?
we have simple assemblies with bolted weldments and few misc. parts. most assemblies are 3-20 parts a typical project would have:
-a few laser cut parts, some plastic and hardware. these items need to have part drawings sent to a vendor.
-some in house cretaed parts that need a drawing
-assembly drawing for our shop
i think i am seeing that by having one single IDW its getting hard to send all the drawings to the people that need them. an example would be if a vendor calls about one part, i may send him a 4 page PDF and tell him to look on sheet 2.the other issue that i have is that my standard work flow is:
-design a product
-hand of to another dept for them to enter SKU numbers for parts and assemblies.
so my file names never match what the final product name is. i have been using fields in the iPROP, but it would be nice to revise file names when SKUs are created. im guessing vault would be the tool for something like that?
I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
I have an issue with flat layouts, when a draw a round object such as a rolled punched plate it would be nice to have the flat layout show what the hole callout and spacing would be, however with the way i draw the model. the holes come out as an ellipse, attached is a document showing how i drew the model.
I'm attempting to use a macro in Inventor 2013 I found on the Mod The Machine blog to lay out the parts of an assembly. They're wood (not sheet metal), and the purpose is to create a drawing/cutlist with flat views of all the parts for easier DXF extraction.
The issue is that not all the parts in our assemblies are created with the length and width on the XY plane. So, some parts are laid flat on the XY and some stand up straight. How do I modify this code to look at the XZ and YZ planes as well for length and width?
As CAD administrator at my company, which is in the process of implementing Inventor/Vault, I am quite sold on the Layout Modeling/Multi-body part modeling functionality that Inventor supports. Among other things I believe there is a large payoff in assembly stability and simplicity. However, this workflow is very different from the conventional methods of modeling individual parts and manually constraining assemblies. URLs....
Where I work we do a lot of plate and punch holes in beams for rebar. Is there a way to pull the flat patteren layout of sheet metal and convert to an NC1 file. I can export to a DXF but then i must manually go in and make changes to the DXF in order for it to cut right on our plasma and laser tables. As far as punching holes and cutting beams any clues on this either? We were outsourcing our drafting work before but now we are switching over to in house. I have contacted our supplier of plate nesting software and it looks like they sell something but that means another license of it on another computer.
In autocad 2011 ... I am looking for some sample code to delete all blocks with specific names in a multi layout drawing. There may be multiple blocks with the same name.
This is what I have so far ... this code collects the objects and loops through the layouts and the blocks ... if it finds the text "REVBLK" in the block name ... I want it to delete the block ... it does delete some of them but not all of the blocks ...
Dim E1 As Object Dim ATS As Variant Dim EA As AcadAttributeReference Dim objLayouts As AcadLayouts Dim LayerNextNo As Integer Set objLayouts = ThisDrawing.Layouts LayerNextNo = ThisDrawing.ActiveLayout.TabOrder
While publishing several drawings I am having problems creating Single Sheets, (a customer preference). Even though I have the Multi-sheet/Single-sheet setting set to "Single" Autocad still creates a multi-sheet PDF. I am using Autocad 2012.
I changed my Publish options on the Project Navigator for publishing to PDF as a single sheet per sheet layout. Now I want to put it back so that when I publish it does ALL sheet into one PDF file and I can not figure out how to put it back. Now ever time I publish it does each sheet as a separate pdf.
I have found that if you publish to single-sheet .pdf's and then combine the .pdf's into one file using Acrobat, each sheet is bookmarked using the name of the individual files for the bookmark names. However, if you publish to a multi-sheet .pdf, no bookmarks are created. Is there any way to create multi-sheet .pdf's in AutoCad and have bookmarks automatically inserted (using the name of the layout as the bookmark name)?
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
How can I update automatically my sheet set when I have created a new layout on my drawing? I mean it's awful to drag my new layout into my set for added as a new sheet! Is there an other way to save it and automatically have my new sheet?
When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
We have a new printer/plotter in our office and Autocad cannot find the old one and so I have to select the new one. Here's the scoop:
When I am in the layout tab, everything is perfectly aligned in my layout sheet (24 x 36) and so I type plot and before the dialogue screen appears (We just got a new plotter) Autocad says: "such and such printer: This plotter config. cannot be used for blah blah blah.... The None plot device has been substituted." Which makes sense because that such and such printer is non existent. So i click ok. and the usual plot dialogue screen displays.
I select our new plotter and the exact size of my layout sheet (24 x 36) and click apply to layout and then preview it and it shows the layout cutting off my titleblock on the right hand side. So I cancel the plot (having applied the new printer and 24 x 36 config.) and look at my layout and either my layout sheet or my linework has shifted about 3/4" up and 3/4" to the side.
Why did something shift? My layout sheet was already aligned and at 24 x 36. I don't want to have to move it every time especially if I need to print off older drawings which are set up with the non existent printer. Should I or could I make autocad ignore the old printer and tell it to recognize the new one so I wont ask me every time i open an older drawing?
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
I am trying to copy a layout tab inside an AutoCad file into a sheet set I created. All folders and sub folders are created and setup. What I need is to be able to copy the same layout under different sub folders inside sheet set manager.
To explain this better, I have a sheets set with all different departments inside our company (ex. CNC Dept., Bending, Machining, Welding, etc.). Some drawings have information for CNC, Welding and bending dept. Therefore I need to be able to copy the same drawing layout multiple times under each dept folder.
How can I do this? It only allow me to drag and copy the file once. I wont be able to drag it again under another folder.
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
