AutoCAD Inventor :: Merits Of Layout Modeling Or Multi-Body Part Modeling?
Nov 16, 2012
As CAD administrator at my company, which is in the process of implementing Inventor/Vault, I am quite sold on the Layout Modeling/Multi-body part modeling functionality that Inventor supports. Among other things I believe there is a large payoff in assembly stability and simplicity. However, this workflow is very different from the conventional methods of modeling individual parts and manually constraining assemblies. URLs....
View 8 Replies
ADVERTISEMENT
Sep 12, 2013
Can I export a solid from a multi body part to an other part file. how?
View 1 Replies
View Related
Feb 16, 2012
I am creating a multibody part. I have revolded a surface from a sketch through other bodies and used those bodies to trim the surface. I then thicken the surface to create a solid.
The solid is transparent and no amount of property adjusting or anything else will make it opaque like the rest of the solids.
in the picture the open scalloped portion contains two bodies.
View 2 Replies
View Related
Jun 2, 2012
I have 2 solid bodies in a part file driven by seperate ifeatures.
Why is it when i search down to the surface bodies then into say the first body, then component definition, then features, then i features it shows both ifeatures?
So it goes:
componentdefintion.surfacebodies.item(1).componentdefinition.features.ifeatures
Is there an area somewhere that only shows the 1 ifeature related to a solid?
View 1 Replies
View Related
Jun 15, 2013
How to derive only referenced imates to the solid from multi body part.
View 6 Replies
View Related
Jun 12, 2012
When is the functionality of generating a cut list from the multi body part file going to happen?
This is available in Solid Works and ver frastrating its not for Inventor.
View 8 Replies
View Related
Sep 12, 2013
I have a multi-body part and want to find the both faces which divide the bodys. The first face I pick with the "SelectSet" command.The second one the program should find on its own.
If I pick a boundary face, it should give an error.
One attempt is to create a point on the first face and use the "LocateUsingPoint". But is there a more elegant way for this task?
(Unfortunately there are little examples of the topic multi-body parts.)
View 1 Replies
View Related
Jan 31, 2011
After migrating my project from MDT2009 to Inventor 2010, every solid body in MDT became a part file in INV. If I were modeling from scratch, some of the .IPTs should be multibody parts. Is there any way to cut & paste a solid from one part to another to create a multibody part? I’m not talking about deriving a new part from the source parts. The end result should be a multibody part with all sketches intact and all solids fully editable, as if I had modeled them as a multibody part right from the beginning.
I’ve attached a simple example of two separate parts that should be combined into one multibody part, as shown in the .JPG file. Can it be done without deriving the parts?
View 9 Replies
View Related
May 1, 2012
I am trying to edit a sketch in a multi body part file. While I am trying to edit, it displays all other solid bodies which is not required. How to switch them off displaying unnecessary solid bodies while editing a sketch?
View 6 Replies
View Related
Aug 17, 2012
I have a multi body part with an extruded cut through all solids. Each solid is derived out to its own part. I edited the extrude feature in the multi body part and removed one solid from the selection set. The cut was correctly deleted from the solid, but when I open the part its still there. The only way to make it update correctly is to manually edit the derive feature in the part. Caught it just before it went off for cutting. 2012 SP2, all hotfixes, win7 64 bit.
View 5 Replies
View Related
Feb 1, 2012
I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
INV 2013
View 4 Replies
View Related
Oct 7, 2011
How can i make this chair part nurbs or poly modeling?
View 4 Replies
View Related
Nov 28, 2012
Please see attached image (I have tried to attach the part file but file size is to large to upload). I have created a sheet metal part, then converted to a solid component to utilize the bend tool. The actual part will need to overlap at the ends and will be joined using spot welds. I would like to be able to illustrate the overlap in the inventor model if possible but how to achieve this.
Before I call it a day and revert to AutoCAD or sketch this into a IDW,
View 9 Replies
View Related
Aug 7, 2012
I tried to slice a solid after a quite complex surface and received this error.
"The Boolean operation on solid and/or surface bodies failed.Modeling Operation Error: Inconsistent face-body relationships.SLICE failed for selected solid."
What I have tried:I up-scaled the surface-solid ensemble by 10x but it didn't work(same error)
I extruded that complex,multi-plane surface and then sliced it with a horizontal plane and got the desired solid BUT:I would like to know what the cause of that problem was and how it can be solved so that I can slice that solid following that surface.
View 9 Replies
View Related
Sep 14, 2011
Why can i use lines from a 3d sketch to constraint a part to a skeleton base part?
I have attached a example where i try to constraint the tube.ipt using 3D geometry lines of the part Layout_3d_sketch.ipt in the assembly teste.iam, but i'm unable to select any lines from that file.
Why can't i use this 3D sketch lines in a skeleton base part?
View 9 Replies
View Related
Jun 1, 2011
I have modeled a face and body of a character separately. I want to join both of them but the border edges are not the same . so whats the method to join both of them together .
View 2 Replies
View Related
Feb 22, 2013
I am creating a outfit around a basic female model but i was wondering if it is possible to smooth the vertices of the outfit along the body like contouring it to the body instead if selecting every vertices and pushing them in?
3Ds Max 2011
View 2 Replies
View Related
Dec 13, 2013
I'm physiotherapist and researcher interested in human body posture analysis. Goal of my researches are to make 3d digital model of human posture. Right now I'm using Microsoft kinect to build a human body model, but it's difficult to do automatic analysis on that mesh. In our team we create an algorithm which analysis posture, right now we base on points located on the body, for that is necessary to manually locate that point's which is inaccurate and time consuming. Our idea is to use divide human body into segments and then fit in those segments some geometry figures ( cylinders , bal, ), next step is to calculate center of masses of those figures, so we simplify the posture to 20-40 points , and calculation of those points can be made automatic.
View 1 Replies
View Related
Dec 7, 2012
Is there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
View 9 Replies
View Related
Apr 26, 2012
what this error means and what's causing it and how to fix it?
IV2010, editing a multi body part gives these errors:
1. No more memory available. Attempt to allocate 208 bytes of memory failed.
and
2. See attached.
This error is preventing me from saving or closing the program.
View 3 Replies
View Related
Dec 10, 2012
Any way of forcing an update of the colour styles from the original Multi-Body part to the assembled/derived components.
I always control colours in the original Multi-body part as I can select groups in one go to change colours, this doesn’t filter down to the derived/assembly component I then have to go into each part and uncheck then recheck the 'Use color override from source component'.
I am aware of the reg file/vba to remove the source override completely but which works for certain ways of working / problems, but I want to control it from the original part which I assume was the way it was intended as it is the default option!
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
View 7 Replies
View Related
Jan 27, 2012
I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies
View Related
Jun 11, 2013
Is it correct that the BOM will not show thumbnails for a multibody assembly until the component are dirtied? I initially get 'preview not available' for all parts in the assembly. Opening a part and (for example) moving the EOP back and forth will then cause the thumbnail to show in the BOM.
Is there any quick workaround or do I have to write a macro?
View 7 Replies
View Related
Dec 16, 2012
I have a multibody surface part, which is derived from a multibody part. Therefor there are multiple contiguous surface parts that are isolated from each other.
Is there a way to STITCH or convert one of these contiguous surfaces into a solid part ?
Note: I tried the THICKEN tool but the hole features do not come out right. Some holes are missing or the hole depths are wrong.
View 9 Replies
View Related
Jan 15, 2014
I have got a drawing that is set up on A0 as per the client requirements. However, for use on site by our engineers, i want to send over an A2 of just the area they are working in to make it clearer for them. On my original drawing, all the information for the installers is dotted around the page to show site requirements. However, what I am planning on doing now is making 2 x A2 drawings showing the areas of work for this phase, and then 1 x A2 showing all installer requirements.
My issue is though that i don't want to alter the positioning on my drawing in the layout tab as it is to how the client needs it to be and sod's law will be that i will need to do an amendment at some point too.
I have seen a drawing with some boundaries drawn on the layout, which the client has put on a 'defpoints' layer, then on the paper space they have been able to show the different defpoints in different areas on the page, even though they are joining on the layout tab.
View 9 Replies
View Related
Jan 26, 2013
I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
View 7 Replies
View Related
Jun 7, 2012
So there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
View 4 Replies
View Related
Apr 17, 2013
When I try to suppress the bodies in the multi-bodies part to clarify the drawing view, I can not do that the way I normally do that if I had an assembly and suppressed the component.
Is it something Autodesk can improve on or rather something I overlook.
View 7 Replies
View Related
Dec 22, 2012
How best to make the stone facets go sideways into the main tower. As you can see though it doesn't make a whole lot of sense. How I could achieve such results?
View 1 Replies
View Related
Sep 26, 2013
I am fluent in sketchup modeling but have had no success in attempting to model something similar to the crinkled wall mass in the attached image. I have d/l'ed 3dsmax for 30 trial and trying to learn on the fly, which is difficult. before i spend too much time trying to to achieve a crinkled wall mass? in my first attempt i was able to create a rectangle, add modifer of garment maker and apply cloth attributes (and ripple) to it but it's too smooth around the edges although it had amplitude to it.
View 9 Replies
View Related
Oct 14, 2011
I have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies
View Related
