AutoCAD Inventor :: Cut List From Multi Body Part File?
Jun 12, 2012When is the functionality of generating a cut list from the multi body part file going to happen?
This is available in Solid Works and ver frastrating its not for Inventor.
ADVERTISEMENT
AutoCAD Inventor :: IFeatures In Multi Body Part File
Jun 2, 2012I have 2 solid bodies in a part file driven by seperate ifeatures.
Why is it when i search down to the surface bodies then into say the first body, then component definition, then features, then i features it shows both ifeatures?
So it goes:
componentdefintion.surfacebodies.item(1).componentdefinition.features.ifeatures
Is there an area somewhere that only shows the 1 ifeature related to a solid?
AutoCAD Inventor :: Edit A Sketch In Multi Body Part File?
May 1, 2012I am trying to edit a sketch in a multi body part file. While I am trying to edit, it displays all other solid bodies which is not required. How to switch them off displaying unnecessary solid bodies while editing a sketch?
View 6 Replies View RelatedAutoCAD Inventor :: How To Export Body From Multi-body Part
Sep 12, 2013Can I export a solid from a multi body part to an other part file. how?
View 1 Replies View RelatedAutoCAD Inventor :: Multi Body Part Transparency Malfunction
Feb 16, 2012I am creating a multibody part. I have revolded a surface from a sketch through other bodies and used those bodies to trim the surface. I then thicken the surface to create a solid.
The solid is transparent and no amount of property adjusting or anything else will make it opaque like the rest of the solids.
in the picture the open scalloped portion contains two bodies.
AutoCAD Inventor :: Derive IMate From Multi Body Part?
Jun 15, 2013How to derive only referenced imates to the solid from multi body part.
View 6 Replies View RelatedAutoCAD Inventor :: Multi Body - Find Both Faces Which Divide One Part Into Two
Sep 12, 2013I have a multi-body part and want to find the both faces which divide the bodys. The first face I pick with the "SelectSet" command.The second one the program should find on its own.
If I pick a boundary face, it should give an error.
One attempt is to create a point on the first face and use the "LocateUsingPoint". But is there a more elegant way for this task?
(Unfortunately there are little examples of the topic multi-body parts.)
AutoCAD Inventor :: Cut And Paste Solids To Create Multi Body Part
Jan 31, 2011After migrating my project from MDT2009 to Inventor 2010, every solid body in MDT became a part file in INV. If I were modeling from scratch, some of the .IPTs should be multibody parts. Is there any way to cut & paste a solid from one part to another to create a multibody part? I’m not talking about deriving a new part from the source parts. The end result should be a multibody part with all sketches intact and all solids fully editable, as if I had modeled them as a multibody part right from the beginning.
I’ve attached a simple example of two separate parts that should be combined into one multibody part, as shown in the .JPG file. Can it be done without deriving the parts?
AutoCAD Inventor :: Multi Body Cut Derive - Manual Editing In Part
Aug 17, 2012I have a multi body part with an extruded cut through all solids. Each solid is derived out to its own part. I edited the extrude feature in the multi body part and removed one solid from the selection set. The cut was correctly deleted from the solid, but when I open the part its still there. The only way to make it update correctly is to manually edit the derive feature in the part. Caught it just before it went off for cutting. 2012 SP2, all hotfixes, win7 64 bit.
View 5 Replies View RelatedAutoCAD Inventor :: Sheet Metal Part Will Not Create Flange Due To Multi Body Error
Feb 1, 2012I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
INV 2013
AutoCAD Inventor :: Merits Of Layout Modeling Or Multi-Body Part Modeling?
Nov 16, 2012As CAD administrator at my company, which is in the process of implementing Inventor/Vault, I am quite sold on the Layout Modeling/Multi-body part modeling functionality that Inventor supports. Among other things I believe there is a large payoff in assembly stability and simplicity. However, this workflow is very different from the conventional methods of modeling individual parts and manually constraining assemblies. URLs....
View 8 Replies View RelatedAutoCAD Inventor :: Saving A Multi Value Parameter List Externally From The Part
Jan 17, 2013I have an iLogic template part that has a multi value parameter. In this case the product code can be selected from a list of 4 codes. In futre we may need 5 and the 5th may need to be available to older parts.
I would like to avoid having to add the 5th as an option to every part we've ever made when the 5th becomes required.
I'd like to have the list of codes stored in an external file (Possibly an xml) and the template part reference that file to acquire it's list of available codes. That way I can add codes to the xml and all the files will have their list of available codes updated.
AutoCAD Inventor :: Solid Body Part File Sketches?
May 22, 2012I'm editing a solid body part file.
I've made all sketches and workplanes etc not visible.
When i edit a sketch down the tree, obviously the sketch becomes visible but the problem I have is some other sketches and workplanes also become visible.
AutoCAD Inventor :: Duplicate Solid Body 4 Times In Part File?
Mar 31, 2012I want to duplicate a solid body 4 times in a part file. i did that by going for circular pattern. But after creating that, i had to add on few more features. I did that in parent solid body. then I noticed that other 3 solid body is not getting updated. I know in assembly file it gets updated but any way in part file.
View 3 Replies View RelatedAutoCAD Inventor :: Hole Feature In Solid Body Part File And Bolted Generator
Nov 21, 2011If we require to create patterned holes thru a number of solids, this works great only requiring the one hole feature.
However, once an assembly is created with the parts, (these parts obviously have their own derived individual solids in them) when needing to place a bolted generated assembly to the patterned holes. It won't recognise the pattern.
So I've come to the conclusion that the bolted generator/drop place function really needs improvement for solid body modelling technique. (Mind you, the BG needs a complete rethink because its at about 50% complete).
What I can see needs to be added, is the functionality of the parts recognising the hole pattern. e.g. when using the make components function it gives an option to add a link to the hole feature.
My only other option at present is to create the holes within the assembly file and transfer the hole feature to each part file. This obviously loses the parametric functionality.
AutoCAD Inventor :: Multi-Body Mirror Holes
Dec 7, 2012Is there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
AutoCAD Inventor :: Error In Multi-body Parts
Apr 26, 2012what this error means and what's causing it and how to fix it?
IV2010, editing a multi body part gives these errors:
1. No more memory available. Attempt to allocate 208 bytes of memory failed.
and
2. See attached.
This error is preventing me from saving or closing the program.
AutoCAD Inventor :: Multi-Body Colour Update All
Dec 10, 2012Any way of forcing an update of the colour styles from the original Multi-Body part to the assembled/derived components.
I always control colours in the original Multi-body part as I can select groups in one go to change colours, this doesn’t filter down to the derived/assembly component I then have to go into each part and uncheck then recheck the 'Use color override from source component'.
I am aware of the reg file/vba to remove the source override completely but which works for certain ways of working / problems, but I want to control it from the original part which I assume was the way it was intended as it is the default option!
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
AutoCAD Inventor :: Multi Body And Importing Parts
Jan 27, 2012I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies View RelatedAutoCAD Inventor :: Thumbnail Not Available In Multi Body Assembly BOM
Jun 11, 2013Is it correct that the BOM will not show thumbnails for a multibody assembly until the component are dirtied? I initially get 'preview not available' for all parts in the assembly. Opening a part and (for example) moving the EOP back and forth will then cause the thumbnail to show in the BOM.
Is there any quick workaround or do I have to write a macro?
AutoCAD Inventor :: Multi Body Surface To Solid
Dec 16, 2012I have a multibody surface part, which is derived from a multibody part. Therefor there are multiple contiguous surface parts that are isolated from each other.
Is there a way to STITCH or convert one of these contiguous surfaces into a solid part ?
Note: I tried the THICKEN tool but the hole features do not come out right. Some holes are missing or the hole depths are wrong.
AutoCAD Inventor :: Moving Solids In Multi-body Parts?
Jan 26, 2013I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
AutoCAD Inventor :: Multi Body Parts Not Working In 2013 Pro And Standard?
Jun 7, 2012So there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
AutoCAD Inventor :: Suppressing Bodies In Multi-body Parts In Drawing Views
Apr 17, 2013When I try to suppress the bodies in the multi-bodies part to clarify the drawing view, I can not do that the way I normally do that if I had an assembly and suppressed the component.
Is it something Autodesk can improve on or rather something I overlook.
AutoCAD Inventor :: How To Duplicate A Part Inside Of Body
Sep 12, 2013I am trying to draw a series of flow channel (in a row) in a rectangular parallelepiped.
So I sketched a rectangle -> extruded (cut) -> sketched another rectangle -> extruded -> sketched another rectangle inside of one of channel -> extruded, and finally made a flow channel like in attached file.
What I hope to know are :
(1) Is there a way to copy that flow channel? Or should I have to do same repeatedly for tens of flow channel?
(2) Is there a way to make a flow channel easily?
AutoCAD Inventor :: Rotate Body In Part Document?
Aug 5, 2013I am trying to rotate a body in a part document using a .net add-in through the API. I saw this mod the machine post [URL] which appears to be exactly what I am looking for. As I try to incorporate this into my add-in it doesn't recognize the MoveDefinition or PartDefinition.Features.MoveFeatures, as if these were not included in the SDK. The VBA code that is listed will run, but I cannot convert it to C#.net code. Is there something I am missing, perhaps an extra reference? I am using Inventor 2013 with the updated 2013 SDK downloaded from here [URL]
View 5 Replies View RelatedAutoCAD Inventor :: Scale Mesh Appearance On Part Body?
Dec 5, 2012How can I scale the mesh appearance on a part body. The holes are appearing too big.
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Multi-Value List Not In Order
Jan 10, 2012I am trying to create a form, so that my designers can pick their parameters when they first start a new part.
For this form I have created a multi-valued parameter for them to select from.
My issue is, why does Inventor not list fractions in the correct order.
What I would like to see:
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
What Inventor lists:
1"
1/2"
1/4"
11/16"
13/16"
15/16"
3/8"
3/16"
5/8"
5/16"
7/8"
7/16"
9/16"
Is there a way to get Inventor to list these parameters in order of value?
AutoCAD Inventor :: Change Contents Of Multi Value List
Jan 30, 2013Is there a way to change the values available in a Multivalue list, based on another parameter?
I'd like to achieve:
When material is "MDF", available thicknesses are 6,9, 12
When material is "PLY", available thicknesses are 15,18, 25
I kinda solved this already but it's not quite right. I basically mad the list a list of custom parameters, and changed the values of these parameters based on the material parameter. :
'------iLogic--------------
If Material = "MDF" Then
iProperties.Value("Custom", "Thickness 1") = 6
iProperties.Value("Custom", "Thickness 2") = 9
iProperties.Value("Custom", "Thickness 3") = 12
Else If Material = "PLY" Then
iProperties.Value("Custom", "Thickness 1") = 15
iProperties.Value("Custom", "Thickness 2") = 18
iProperties.Value("Custom", "Thickness 3") = 25
End If
MultiValue.SetList("Thicknes",iProperties.Value("Custom", "Thickness 1"),iProperties.Value("Custom", "Thickness 2"),iProperties.Value("Custom", "Thickness 3")
MultiValue.UpdateAfterChange = True
'------------------End----------------------------
This works pretty much, when changing between the materials the value currently selected remains in the list until another is selected from the list. Once another value has been selected, only the correct values are available, but immediately after the material has been changed the thickness for that material is incorrect and could lead to operators specifying an unavailable thickness.
AutoCAD Inventor :: ILogic Multi-Value List From Materials
Jul 8, 2012I am trying to populate a multi-value user parameter with a list composed of the various materials available from the iProperties "Physical" tab. So far I have this:
For Each material In iProperties.Materials
Bracket_Material.Items.Add(material)
Next
iProperties.Material=Bracket_Material
Running the Rule gets this error message:
Rule Compile Errors in Material_Rule, in _Mounting_bracket.ipt
Error on Line 2 : 'Bracket_Material' is not declared. It may be inaccessible due to its protection level.
I think I am doing the "Bracket_Material.Items.Add(material) " line wrong, but I don't know enough VB to fix it. It seems to me it IS declared in the Parameters table - isn't adding the parameter to the parameter table sufficient to declare it?
Eventually I want to add the Bracket_Material Parameter to a form so the user can select material from drop down list and assign it to part.
AutoCAD Inventor :: Add Empty Text Value Within Multi Value List
Aug 12, 2013I could add an empty text value within an multi value list in inventor 2010, but I don't think i can do the same thing in 2013, is there a possible way to do it?
Btw, when by an empty text value I dont mean a space.