AutoCAD Inventor :: Moving Solids In Multi-body Parts?
Jan 26, 2013
I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
View 7 Replies
ADVERTISEMENT
Jan 31, 2011
After migrating my project from MDT2009 to Inventor 2010, every solid body in MDT became a part file in INV. If I were modeling from scratch, some of the .IPTs should be multibody parts. Is there any way to cut & paste a solid from one part to another to create a multibody part? I’m not talking about deriving a new part from the source parts. The end result should be a multibody part with all sketches intact and all solids fully editable, as if I had modeled them as a multibody part right from the beginning.
I’ve attached a simple example of two separate parts that should be combined into one multibody part, as shown in the .JPG file. Can it be done without deriving the parts?
View 9 Replies
View Related
Apr 26, 2012
what this error means and what's causing it and how to fix it?
IV2010, editing a multi body part gives these errors:
1. No more memory available. Attempt to allocate 208 bytes of memory failed.
and
2. See attached.
This error is preventing me from saving or closing the program.
View 3 Replies
View Related
Jan 27, 2012
I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies
View Related
Jun 7, 2012
So there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
View 4 Replies
View Related
Apr 17, 2013
When I try to suppress the bodies in the multi-bodies part to clarify the drawing view, I can not do that the way I normally do that if I had an assembly and suppressed the component.
Is it something Autodesk can improve on or rather something I overlook.
View 7 Replies
View Related
Sep 12, 2013
Can I export a solid from a multi body part to an other part file. how?
View 1 Replies
View Related
Dec 7, 2012
Is there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
View 9 Replies
View Related
Dec 10, 2012
Any way of forcing an update of the colour styles from the original Multi-Body part to the assembled/derived components.
I always control colours in the original Multi-body part as I can select groups in one go to change colours, this doesn’t filter down to the derived/assembly component I then have to go into each part and uncheck then recheck the 'Use color override from source component'.
I am aware of the reg file/vba to remove the source override completely but which works for certain ways of working / problems, but I want to control it from the original part which I assume was the way it was intended as it is the default option!
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
View 7 Replies
View Related
Jun 11, 2013
Is it correct that the BOM will not show thumbnails for a multibody assembly until the component are dirtied? I initially get 'preview not available' for all parts in the assembly. Opening a part and (for example) moving the EOP back and forth will then cause the thumbnail to show in the BOM.
Is there any quick workaround or do I have to write a macro?
View 7 Replies
View Related
Dec 16, 2012
I have a multibody surface part, which is derived from a multibody part. Therefor there are multiple contiguous surface parts that are isolated from each other.
Is there a way to STITCH or convert one of these contiguous surfaces into a solid part ?
Note: I tried the THICKEN tool but the hole features do not come out right. Some holes are missing or the hole depths are wrong.
View 9 Replies
View Related
Feb 16, 2012
I am creating a multibody part. I have revolded a surface from a sketch through other bodies and used those bodies to trim the surface. I then thicken the surface to create a solid.
The solid is transparent and no amount of property adjusting or anything else will make it opaque like the rest of the solids.
in the picture the open scalloped portion contains two bodies.
View 2 Replies
View Related
Jun 2, 2012
I have 2 solid bodies in a part file driven by seperate ifeatures.
Why is it when i search down to the surface bodies then into say the first body, then component definition, then features, then i features it shows both ifeatures?
So it goes:
componentdefintion.surfacebodies.item(1).componentdefinition.features.ifeatures
Is there an area somewhere that only shows the 1 ifeature related to a solid?
View 1 Replies
View Related
Jun 15, 2013
How to derive only referenced imates to the solid from multi body part.
View 6 Replies
View Related
Jun 12, 2012
When is the functionality of generating a cut list from the multi body part file going to happen?
This is available in Solid Works and ver frastrating its not for Inventor.
View 8 Replies
View Related
Sep 12, 2013
I have a multi-body part and want to find the both faces which divide the bodys. The first face I pick with the "SelectSet" command.The second one the program should find on its own.
If I pick a boundary face, it should give an error.
One attempt is to create a point on the first face and use the "LocateUsingPoint". But is there a more elegant way for this task?
(Unfortunately there are little examples of the topic multi-body parts.)
View 1 Replies
View Related
May 1, 2012
I am trying to edit a sketch in a multi body part file. While I am trying to edit, it displays all other solid bodies which is not required. How to switch them off displaying unnecessary solid bodies while editing a sketch?
View 6 Replies
View Related
Aug 17, 2012
I have a multi body part with an extruded cut through all solids. Each solid is derived out to its own part. I edited the extrude feature in the multi body part and removed one solid from the selection set. The cut was correctly deleted from the solid, but when I open the part its still there. The only way to make it update correctly is to manually edit the derive feature in the part. Caught it just before it went off for cutting. 2012 SP2, all hotfixes, win7 64 bit.
View 5 Replies
View Related
Jun 11, 2012
I have a part which has 2 solid bodies in it which were created using the extrude command. When setting the iProperties for this part I get the material properties applied to both solids. Is it possible to set a material for each solid so that they will be listed separately under iProps ? I suspect this can't be done in which case how would I go about separating the solid bodies ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Feb 1, 2012
I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
INV 2013
View 4 Replies
View Related
Oct 30, 2013
I have an insert that I'd like to split into several layers. Is it possible to do this with the split tool, or is it limited to only one "split tool" at a time?
In the picture, the wireframe is the 'insert', the letters indicative of cavities cut into the insert. The purple sketch lines would be typical of where the solid part would be split into multiple parts.
INVENTOR 2014 STANDARD
IOSX and PARALLELS
View 3 Replies
View Related
Jan 9, 2012
How do you separate two objects that are considered to be the same body.
I have an car airbox made up of two separate solid objects. How can I separate them? see the attached image for a better understanding of my situation.
View 9 Replies
View Related
Nov 16, 2012
As CAD administrator at my company, which is in the process of implementing Inventor/Vault, I am quite sold on the Layout Modeling/Multi-body part modeling functionality that Inventor supports. Among other things I believe there is a large payoff in assembly stability and simplicity. However, this workflow is very different from the conventional methods of modeling individual parts and manually constraining assemblies. URLs....
View 8 Replies
View Related
Sep 23, 2011
I know I can select multiple parts in the browser and selecting them individually in the model window. Is there a reason or a way to select multiple parts by dragging a window like in acad or even .iam files?
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 2 Replies
View Related
Feb 3, 2012
Nesting phantom iAssemblies within another iAssembly? We are having a problem with the BOM not generating the correct multi-item parts lists. Even though the individual iAssemblies act correctly when viewing there individual BOMs, when these parts are nested inside another iAssembly and switched (Table Replace) between individual items, the BOM shows all dash numbers as the current active one.
Any unresolved issues within iAssemblies and the BOM?
View 6 Replies
View Related
Dec 6, 2011
We are using inventor 2011 and I would like to make the text wrap where I want it to not where the cell length determines. Can I do this in the ipropeties of the part? When I edit the parts list to move wrap the text manually the text turns blue of course, but this also negates the updating of parts automatically. In the part I use an expression to ensure that the description reverts back to the iproperties of the part ie =<G_L> X <G_W> - <MATERIAL>. I would like it to insert a text wrap then proceed to the next line with <STOCKNUMBER> - <PARTNUMBER> so I would look like:
12" X 6" - G40.21-44W
PL. 1/2 - PL-100
View 3 Replies
View Related
Feb 8, 2012
I've been making a model plane model in inventor 2012 from imported IGES geometry, and Realised that my sketches were not assigned to any part (and thus can't be lofted). Is there any way of moving the sketches to the newly created part without redrawing everything? I've tried dragging and dropping because it seemed to make sense, but alas, that had no success.
View 4 Replies
View Related
Apr 8, 2013
When I place parts in my assembly they are stuck in the position I place it and can only be moved once I mate it to another part of my assembly. I have only recently encountered this problem, as usually when I place a parts in an assembly I am able to simply click on the component and drag/move that part around to put it in a place that suits before I use any constraints.
What is the problem, have I clicked on some function unknown to myself which has disabled the ability to move parts/assemblies when I place them into an assembly?
View 4 Replies
View Related
Mar 21, 2013
So I have this assembly with all parts constrained properly yet it won't let the parts move the way they should under the constraints applied and it's telling me I have interfering constraints.
I checked the "broken" constraints over but they look fine. It's a relatively small assembly (10-15 parts), although the parts have been used in a previous assembly. Would this affect their behavior?
View 5 Replies
View Related
Apr 4, 2013
I have numerous step files which I have imported into an assembly. I now need to move all the imported files to a predefined UCS (not 0,0,0). I can do this manually by using the assemble command and selecting the centre point then selecting the centre point of the pre-defined UCS.
I have potentially thousands of parts to move in various assemblies, is there a way to do this using iLogic and if so, how?
View 2 Replies
View Related
Dec 8, 2013
I have a script that is perfectly works in 2012 inventor pro version. It moves newly added virtual parts into the VIRTUAL_PARTS folder. Part of script is below:
Dim oFolder As BrowserFolder Dim oTopNode As BrowserNode oTopNode = oPane.TopNode() Dim oTopNodeOcc As BrowserFoldersEnumerator oTopNodeOcc = oTopNode.BrowserFolders For Each oFolder In oTopNode.BrowserFolders i = i + 1 Next If i = 0 Then oFolder = oPane.AddBrowserFolder("VIRTUAL_PARTS", oOccurrenceNodes) Else For Each oFolder In oTopNode.BrowserFolders If oFolder.Name = "VIRTUAL_PARTS" Then For Each oOcc In oAsmCompDef.Occurrences If TypeOf oOcc.Definition Is VirtualComponentDefinition Then oNode = oPane.GetBrowserNodeFromObject(oOcc) End If 'MsgBox(oTopNodeOcc(1).Name) oTopNodeOcc(1).Add(oNode) Next Else ' do nothing End If Next End If
In 2014 pro it works only once, when I add first virtual part. It creates a folder and moves it there. When I add 2nd virtual part it gives me a error
see screenshot below.
View 4 Replies
View Related
