I want to duplicate a solid body 4 times in a part file. i did that by going for circular pattern. But after creating that, i had to add on few more features. I did that in parent solid body. then I noticed that other 3 solid body is not getting updated. I know in assembly file it gets updated but any way in part file.
View 3 Replies
I'm editing a solid body part file.
I've made all sketches and workplanes etc not visible.
When i edit a sketch down the tree, obviously the sketch becomes visible but the problem I have is some other sketches and workplanes also become visible.
If we require to create patterned holes thru a number of solids, this works great only requiring the one hole feature.
However, once an assembly is created with the parts, (these parts obviously have their own derived individual solids in them) when needing to place a bolted generated assembly to the patterned holes. It won't recognise the pattern.
So I've come to the conclusion that the bolted generator/drop place function really needs improvement for solid body modelling technique. (Mind you, the BG needs a complete rethink because its at about 50% complete).
What I can see needs to be added, is the functionality of the parts recognising the hole pattern. e.g. when using the make components function it gives an option to add a link to the hole feature.
My only other option at present is to create the holes within the assembly file and transfer the hole feature to each part file. This obviously loses the parametric functionality.
I am trying to draw a series of flow channel (in a row) in a rectangular parallelepiped.
So I sketched a rectangle -> extruded (cut) -> sketched another rectangle -> extruded -> sketched another rectangle inside of one of channel -> extruded, and finally made a flow channel like in attached file.
What I hope to know are :
(1) Is there a way to copy that flow channel? Or should I have to do same repeatedly for tens of flow channel?
(2) Is there a way to make a flow channel easily?
I've created a tie-on-cable marker tag using Loft, Replace Face and Split techniques. After splitting, I turn off the visibility of one of the two resulting solid bodies. File A208P03_Label.jpg shows the results with solid body Solid2 visibility either on or off.
The cable marker tag is then used in an assembly file shown in MI-CA-0261.iam.jpg and a drawing file shown in MI-CA-0261.idw.jpg. The problem I have is that Solid2 is showing up in the idw drawing file when I'd rather it's visibility be off as in the .iam assembly file.
How can I convert a surface body in a solid body?
I attach my file.
Can I export a solid from a multi body part to an other part file. how?
View 1 Replies View RelatedI have 2 solid bodies in a part file driven by seperate ifeatures.
Why is it when i search down to the surface bodies then into say the first body, then component definition, then features, then i features it shows both ifeatures?
So it goes:
componentdefintion.surfacebodies.item(1).componentdefinition.features.ifeatures
Is there an area somewhere that only shows the 1 ifeature related to a solid?
When is the functionality of generating a cut list from the multi body part file going to happen?
This is available in Solid Works and ver frastrating its not for Inventor.
I am trying to edit a sketch in a multi body part file. While I am trying to edit, it displays all other solid bodies which is not required. How to switch them off displaying unnecessary solid bodies while editing a sketch?
View 6 Replies View RelatedI'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I am using inventor 2013. I currently have a IGES file that doesn't show the surfaces on my inventor drawings. The include all surfaces feature is check but still doesnt show all the surfaces. I just recently imported a IGES file as a soild part but i do not rememeber how i did it. Once I clicked on the IGES file to open and then click options. What do I fill out on the option dialog box that the IGES file imports as a solid part and shows all surfaces on my inventor drawings.
View 9 Replies View RelatedI have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
Is possible create new Body (SolidBody) for iFeature? In VBA or .NET.
View 5 Replies View Relatedi used to use Solidwork's sweep-cut with a solid body feature but i can't find it in Inventor now.
Procedure:
In part file;
Create a second solid body (must be axis-symetric, like revolved feature),
Create a path that intersects with the solid (can be a line or a curve),
Sweep the solid along the path with cut command.
I need this where the sweep-cut with a profile is not enough, to get surfaces obtainable by milling on a cylindirical body on a helical path.
I'm making drawings of assemblies in Inventor 2012 and was wondering how to turn off the visibility of specific solid bodies within a single part containing multiple bodies, or make it match the visibility in the assembly and part file itself.
In particular my situation is that I have a camera whose part model includes a solid body for its view cone. The visibility of this solid is turned off, so when opening the camera itself, or the assembly containing it, it doesn't appear, but when I place that assembly or part in a drawing it's included, and the only way I've figured out to get rid of it is to turn the whole camera's visibility off within the drawing.
I want to make an ipart of a container with as customizable parameters (the Diameter and the Volume of one of the solid bodies).
[URL]...
Here comes the problem:
when i was changing the volume parameter, i recieved an error that this property was read-only.is it possible te use the volume calculation from inventor the calculate back to the diameter or height? ,and also for a solid body?
If so, what do i need to do? I am using inventor 2013 (basic).
Is there a way to get that long tube and that rectangular part all around that middle circle.
[URL]........
Open this picture. In the end it would end up looking something like that lamp shade. I got one part down so is there a way to get a bunch of those around instead of redrawing it?
I am trying to convert this composite surface into a single solid body, however when I try to stich the surfaces in the construction environment it always crashes. I have also tried edditing the STEP file import options but it still always opens as a composite surface.
View 7 Replies View RelatedI have created two solid body in the modeling mode &maintained seperate body ( Didn't combine) there after hide & visibility off one solid body .while taking the detail that time two solid body is appearing. how to switch of the body in detail.
View 9 Replies View RelatedI've created an assembly by using "Make Components" from a part comprised of solid bodies. If I suppress a feature in the "Control Part.ipt" (the part that holds all the solid bodies) it removed the part from the assembly, but it does not remove it from the BOM. What do I have to do to make the BOM follow what the assembly looks like?
View 2 Replies View RelatedI am currently building my library of equipment in Inventor.
I have now some how changed a solid body part into a sheet metal part.....
Is there a way to change it back?
I'm trying to bolt a solid body (Honda GX160 engine) onto a piece of angle iron (from frame generator). Starting with a point on a plane on the engine, the Bolted Connection Generator will not let me select a termination plane on the angle iron.
IV Pro 2011 64bit SP2; Win7 Ultimate SP1
ASUS MB Intel i5-3450 @ 3.10 GHz, 8GB RAM
ATI AMD Radeon HD 6600 Series, 1GB RAM
I have a multibody surface part, which is derived from a multibody part. Therefor there are multiple contiguous surface parts that are isolated from each other.
Is there a way to STITCH or convert one of these contiguous surfaces into a solid part ?
Note: I tried the THICKEN tool but the hole features do not come out right. Some holes are missing or the hole depths are wrong.
I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
View 1 Replies View RelatedI just did a Circular Pattern of a threaded holes to a second solid body. The hole came through but the thread did not?Right now I have SP1 installed. I have been using solid bodies for a long time now and have not seen this.
A co-worker just came up with the same thing?
if i draw up a 3d sold part as the finished part, can i then draw a new rectangle solid body over the top of this and split the new solid body using the part as the split tool?
the idea being that i am left with a rectangular plate with a female 3d impression of the finished part in the top.I can't seem to use the part as a split tool?
If I nead to insert a Part a many times in an assembly... let's say fifty times.
The only way I know is to copy past fifty times (then I place them with the constraints neaded).
The rectangle or cicular array can't be used since they a realy in different places.
But is there a fastest way to insert the Part fifty times in the assembly, instead of copy paste?
Our Autocad parts lists used to calculate the weight of parts times the quantities. Now we are using Inventor and I see that the weight shown on a parts list is the weight of an individual part - although the quantity could be 2 , 3 (more than one). Is there a way to have the total weight shown equal to MASS times ITEM QTY?
View 1 Replies View RelatedIn an assembly, I am trying to get the same part recreated X amount of times, on the fly with iLogic, but each time with a different length.
View 6 Replies View RelatedIn testing my latest automation project, I've found that I can't save copies of a part multiple times (after deleteing the files off the disk) unless I close out of the top level assembly document, and reopen it. I used Process Monitor and determined that Inventor is trying to save to an existing file instead of creating a new file.
Inventor 2013 SP 1.1
