AutoCAD Civil 3D :: Create Sheet Drawing That Has Two Plan Or Profile Views On Same Layout?
May 27, 2013I would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Plan And Profile Sheet Layout?
Apr 9, 2013When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
View 2 Replies View RelatedAutoCAD Civil 3D :: Plan Production Profile Views
Dec 14, 2013I am trying to use the plan production feature and I've got it working pretty well except when it creates the profile view, it cuts off the data band and also makes the viewport at the very top edge of the profile, so in the viewport I can't see the data band or the top edge of the profile view.
What setting am I missing to make it show the data band?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
AutoCAD Civil 3D :: Plan And Profile Layout
Apr 30, 2012Is there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedAutoCAD Civil 3D :: New Plan And Profile Sheet?
Nov 2, 2013How can I create a own Plan and Profile Sheet?
I already spent much time trying do it but it was failed.
AutoCAD Civil 3D :: Three Profiles On A Plan And Profile Sheet
Aug 27, 2012What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.
Just looking for the main salient steps at the conceptual level.
AutoCAD Civil 3D :: Plan And Profile Sheet Production
Nov 30, 2011I am having a "problem" with creating plan and profile sheets due to the large level differences in my profile. The plan and profile sheets are produced but the profile gets chopped off and I can't figure out how to get around it short of manually creating the sheets (which is a bit counter intuitive given Civil 3D's capabilities)
Is there a way of getting this to work??
AutoCAD Civil 3D :: Creating Layout Tabs For Plan And Profile Sheets
Dec 18, 2013I am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedAutoCAD Civil 3D :: Multiple Profiles On Plan And Profile Sheet?
Aug 5, 2013How can I show two proposed alignments in one plan and profile sheet?
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Show 1500 Feet Of Stationing In Plan And Profile Sheet
Feb 21, 2013When I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Sheets - Always Have Prompted To Create New Profile Views?
Sep 2, 2013Every time I create the sheets C3D ask me to create a profile view ?
But ... I already have it ....
Does C3D ask always for a new one ?
AutoCAD Civil 3D :: Create Profile Layout From Feature Line
Oct 4, 2012I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
AutoCAD Civil 3D :: Adding Profile To Existing Profile Views
May 10, 2013I have 3 profiles that I've superimposed together. Then I created sheets using the superimposed profile. I used the wizard and had Civil 3d do it for me (2012). Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut. The data is shortcut into the drawing with my cut profiles views. How do I get it to be in the cut profile views without re cutting everything?
View 1 Replies View RelatedAutoCad :: Create A Layout With Several Views
Apr 18, 2013I have a model with many items, each needs to be plotted from several views. One option is to create a layout per view, which means a lot of layouts to manage.
Is there another way? Where I can create a layout with several views so that plotting it will create multiple pages?
AutoCAD Civil 3D :: Plan Production With Multiple Views?
Dec 1, 2013I am trying to use plan production to generate sheets for a long, skinny corridor. I wanted to put two plans onto a single sheet.
I have tried a few settings, but get a duplicate of the same plan. Is this possible, or is necessary to do it manually.
AutoCad :: Creating Sectional Views Within Layout Drawing
Jan 10, 2014If it is possible to create a sectional view from my model and place that section in a new viewport without changing my other viewports. I have several viewports in my drawing but I need a certain detail section of the model but I do not want any of my viewports to get affected.
I can not have anything added to my model, since later on I will be using this drawing as a xref and I only want the main model to be carried over and not a section detail.
AutoCAD Civil 3D :: Draw A Waterline In Plan / Profile?
Jan 7, 2009What are the options for drawing utilities (namely water lines) in plan view and having them properly show in profile view?
I'm familiar with creating a polyline, turning it into a feature line, weeding vertices, etc. That works all right but is lnog-winded and really doesn't work well when dealing with lots of curves.
AutoCAD Civil 3D :: Getting Profiles Into Plan And Profile Sheets
Jun 17, 2013So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.
View 8 Replies View RelatedAutoCAD Civil 3D :: Plan And Profile Sheets Left To Right
Apr 6, 2010I have generated a right to left profile. I use General-create the view frames and they show right to left --good
I use General-create sheets to create the layouts in my current drawing . Rather than being from left to right, it flips my plan view upside down and aligns it on the left side. Is their a viewport setting I don't know about?
AutoCAD Civil 3D :: Position Of Cursor In Plan And Profile
May 10, 2013Is there any way of determining your cursor position in plan when you are working in a profile or visa versa? I also work in 12d and as you move your cursor on an alignment or profile you can exactly see the position of the cursor in both layouts/views.
View 3 Replies View RelatedAutoCAD Civil 3D :: Show Section Views On Sheet
Nov 14, 2013I have section views @ 50 feet along my corridor and i want to show them on a sheet. When i create a viewport, those section views are not display in Layout Tab?
View 7 Replies View RelatedAutoCAD Civil 3D :: Pipe Networks In Profile Views?
Nov 19, 2012Is there anyway to have the Pipe Networks tab of the Profile View Properties dialog box default to having "Show only parts drawn in profile view" selected automatically?
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Profile Views
Mar 12, 2012I am using C3D 2012.
I have a storm water pipe network and a sanitary pipe network. In the profile view I am displaying both networks. My question is in the profile view the storm pipes are in "front/foreground" of the sanitary pipes. Is there a way to "trim" out the sanitary pipe profile lines where they pass behind the storm sewer.
Kind of like a display order so looking at the profile I can tell which pipe and in foreground and which are in the back ground.
AutoCAD Civil 3D :: Projecting Objects To Profile Views
Apr 9, 2012I have been using feature lines along buried utility locations to project these objects to section views. It works great. I created label styles, and It pops a vertical label on the section view that points toward the existing ground. I tried to use the same feature lines to project objects to profile views, and get very strange results. I do not get an option to select a label style, that field is blank, and on the profile view there is not a point where the alignment and the feature line crossed, but a line drawn all over the general area of the utility location. I have attached pdf examples of a sucessful section view and an unsuccessful profile view. I manually added the "EXISTING WATER" label so that it's easy to locate the line representing the water line.
Win 7 64BIT
C3D 2013
AutoCAD Civil 3D :: Profile Views In Base Maps
Dec 8, 2012What are some workflows people are using for creating P&P sheets?
I have a project that is 8 miles long so I created all the profile views (18) in one base map drawing using the plan production tool and then they are xrefed into my individual sheets.
I'm finding that doing a save or regen take approx. 30 seconds each time. That seems unusually slow to me.
I asked my reseller about it, and their comment was "We wouldn't recommend that many profile views in one drawing".
I assumed (maybe falsely) that if the plan production tool allowed it, then it should work.
AutoCAD Civil 3D :: Reference Profile PVIs In Plan View?
Jun 18, 2012i have some simple profiles and just want to show the pvi's in plan view on the alignment.
i made a reference label and it works great. now i am trying to figure out if there is a quick way to locate the pvi station on plan view other than doing something like create a point using sta. and offset as parameters hand typing in the info.
AutoCAD Civil 3D :: Feature Lines And Plan / Profile Sheets
Apr 17, 2012I have a low pressure sewer system that runs along a road side but is not always parallel to the road. I'm using hte centerline of the road for my alignment. What I need to do is have a profile of the existing ground above the centerline of the pressure pipes show in the plan/profile sheets. I do not need a profile of the roadway.
I'm currently using feature lines to accomplish this and that works fine in the main drawing, however, the profiles I create there don't transfer to the plan/profile sheets when I create them. The only way I have found so far to get thoe profiles to show in the plan/profile sheets is to create the feature lines in the plan/profile drawing and project those lines to my profile view. This is a fairly large system so I will have numerous plan/profile sheets. Creating the feature lines and profiles in the individual sheets is fairly time consuming.
I'm currently using Civil 3D 2012. I realize that with the addition of pressure pipe networks in 2013 might very well give me the tools I need but I'm at a point in this project, and our office, where switching to 2013 isn't really an option yet. However, if that is my answer then I will have to consider that.
AutoCAD Civil 3D :: Profile View Style X Plan Production?
Jul 9, 2013I'm working with plan production sheets and having some trouble. My vertical exaggeration makes me want to split the profile, but when I do it, they get glued together. My left vertical grid numeration stays on the middle of the grid and I get a lot of information overlapped. What I need is to put some gap between these, or split'em. Other issue is that the axis offset of my Profile Style isn't being applied, as well as other configs.
View 2 Replies View RelatedAutoCAD Civil 3D :: Plan And Profile Bands Are Shrinking - 2010?
Jun 15, 2011When I am doing my plan and profiles I have come across a couple of instances where when I am ready to plot or just switching over to the layout tab that the bottom bands of my profile have shrunk. Is thereanything that i can do to stop this or to easily restore them back to normal size? Could this be a Civil 3D 2010 issue or more likely an issue with the template that we had built for our company.
View 6 Replies View RelatedRevit :: Create A Wall The Has Profile (in Plan View)
Nov 22, 2012I need to create a wall the has a profile (in plan view).
View 1 Replies View RelatedAutoCAD Civil 3D :: Split Profile Views And OSNAP Cause Crash
Mar 29, 2010I've been trying to use the automated plan & profile production tools with 2010, but haven't quite gotten the final product I wanted so I've resorted to manually setting up my own "viewframes" to align my viewports with. However, when I snap to either the top right of my profile view or the bottom right of my profile view, Civil 3d automatically crashes. This makes creating closed rectangular polylines to act as "viewframes" around my profile view very frustrating since at some point or another I'll forget to turn osnap off and blam!, civil3d is gone. It only happens with split profile views and it only seems to happen at the right side of the profile. It doesn't seem to happen at splits. It has happened in 2 different drawings. It has happened with different profile view styles.
Update: It only happens when Node is enabled in OSNAP so I can Node and be fine, at least until the next day I forget to disable Node while doing something near a profile.
