I am having a "problem" with creating plan and profile sheets due to the large level differences in my profile. The plan and profile sheets are produced but the profile gets chopped off and I can't figure out how to get around it short of manually creating the sheets (which is a bit counter intuitive given Civil 3D's capabilities)
Is there a way of getting this to work??
I am trying to use the plan production feature and I've got it working pretty well except when it creates the profile view, it cuts off the data band and also makes the viewport at the very top edge of the profile, so in the viewport I can't see the data band or the top edge of the profile view.
What setting am I missing to make it show the data band?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I'm working with plan production sheets and having some trouble. My vertical exaggeration makes me want to split the profile, but when I do it, they get glued together. My left vertical grid numeration stays on the middle of the grid and I get a lot of information overlapped. What I need is to put some gap between these, or split'em. Other issue is that the axis offset of my Profile Style isn't being applied, as well as other configs.
View 2 Replies View RelatedIn plan production, I have created the sheets (plan & profile) as a seperate drawing.
when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)
I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)
Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).
How can I create a own Plan and Profile Sheet?
I already spent much time trying do it but it was failed.
What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.
Just looking for the main salient steps at the conceptual level.
When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
View 2 Replies View RelatedHow can I show two proposed alignments in one plan and profile sheet?
View 3 Replies View RelatedWhen I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies View RelatedI would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies View RelatedI'm using c3d 2013. I'm setting up plan production dwt's for plan-profile, plan, profile and section.
My question is do I need to have a north arrow visible in my plan viewports layouts inside the dwt? I know when creating viewframes and sheets, the dialog has a pull down to add a north arrow at whatever orientation I choose to cut sheets. I didn't know if it will add the north arrow and rotate it based on the one already in the layout tab or if it pulls the north arrow in separately thus having 2 north arrows. Should I take out the north arrow in the plan layouts inside dwt or not?
I've set up a dwt file which uses our title blocks for plan/profile drawings and everything seems to work well except that when I view the profile the text and band sizes are tiny. I have to increase them to really large numbers in order for them to work. It's a metric drawing.
The viewport in the picture has scale of 1:250 set for both annotation and standard scale. The length shown in the view is 200m.
I am trying to use Plan Production Tools. While creating frame I new what my start station was, but was not really sure how far to go so i let it create frames to the end. After i seen where the frames landed i realized i needed to erase one frame. Then i Created sheets. While looking at the sheets i have noticed i did not delete the matchline. Is there a way to delete this matchline or do i have to do all that work again?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I am an IT specialist running AutoCAD Civil 3D on about 100 computers for students at a community college.
The students recently alerted me that the Plan Production templates are missing from their accounts. I have previously watched these templates build, and they are supposed to be installed for each user the first time they run Civil 3D. (I have actually seen these files get added to the enu directory as the green bar progresses.)
At one time, these templates loaded, but now they are not. I am seeing two other folders in this directory, as wel as several other templates in the enu root directory, but not the Plan Production folder.
Civil 3D is part of a suite of CAD apps I installed on our systems that includes base AutoCAD 2013, AutoCAD Architecture, AutoCAD Electrical, AutoCAD MEP, AutoCAD Inventor, AutoCAD Mechanical, AutoCAD MAP, and AutoCAD REVIT.
Also, I have installed Civil 3D SP2 directly over the base installation without first installing SP1.
Finally, some users have told me that we should run base AutoCAD once and let that progrm make the first-time-use changes before running Civil 3D for the first time. I have tried running base AutoCAD first and Civil 3D first, and neither seems to make any difference.
I am trying to use plan production to generate sheets for a long, skinny corridor. I wanted to put two plans onto a single sheet.
I have tried a few settings, but get a duplicate of the same plan. Is this possible, or is necessary to do it manually.
I've read or seen a video on this before, but don't recall fix. As you can see in the attached image that half of my station label is missing, is there a fix for this. I think I recall reading you need to include a data band strictly for positioning of profile view.
View 4 Replies View RelatedI finished my pressure water pipeline plan/profile viewframe and sheets. But in order to approve it here in Brazil, I need to deliver a CD with the .DWG file without AEC Objects. My dismay is the label orientation when I run the AECObjExplode, since all my alignment labels need to be VIEW oriented. Is there a way to do run AECObjExplode so the labels stay oriented to my view frame and sheets in paper space?
View 3 Replies View RelatedI'm using the Plan Production feature of Civil3D 2012 (x64). Here's my scenario:
I have a base file with all company style and layer standards. I have an alignment and profile in this base file, which I am creating sheets for (plan and profile, same sheet). I create my VFG and generate the sheets from this base file. My sheet template creation .dwt file only has a couple layers in it (nice and clean).
Is it normal behavior for the sheet files being created to have ALL the company layers and styles associated with the base drawing where the VFG and sheets were created from? I would think only the layers/styles used for the alignment, profile, and profile view would be transferred to each sheet.
I'm using the Plan Production tools to create alignment drawings and when adding the north arrow during the process i get a error at the end stating @unable to align north arrow?
North arrow is a block and tried with base point and alignment parameters, unless i have missed something in the block creation? How do i create a north arrow block that will align with the layouts in plan production?
I am in the process of creating a .dwt to be used to generate plan & profile sheets. I have attempted to set the viewport type to either plan or profile (depending on the viewport) but it keeps resetting itself to "undefined".
View 1 Replies View RelatedI'm currently doing some testing of 2014 SP1 and noticed the Copy Styles routine when creating Plan Production Sheets doesn't seem to function as it did in 2012?
Using 2014 SP1, I data referenced a Pipe Network into a Plan Prod. sheet that was created before the Pipe networks were created. After data referencing the first Pipe Network into the plan sheet, I tried to label my pipes and structures, noticed none of our custom styles got copied (during create sheets command) into the sheet?
In 2012 they did.We have a lot of these Plan Production dwt's here and it's going to be a major PITA if all Plan Production.dwt's will need to have all Styles within them.
The nice thing about the way it used to work is the styles only needed to be maintained in a couple base.dwt's.
In addition to these Pipe & Structure label styles missing the list goes on throughout the Settings tab. Only present styles seem to be of "in use" nature such as pfl style, Alignment style, pfl view style etc. where the sheet creation process pulled specific information into the sheet dwg from source dwg.
Also did a quick test of our 2012 configuration and majority of , if not all, styles from source dwt do get copied over eliminating the need for them within the Plan Production dwt's. 2012 SP3 used here.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
Is there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedWhat are the options for drawing utilities (namely water lines) in plan view and having them properly show in profile view?
I'm familiar with creating a polyline, turning it into a feature line, weeding vertices, etc. That works all right but is lnog-winded and really doesn't work well when dealing with lots of curves.
So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.
View 8 Replies View RelatedI have generated a right to left profile. I use General-create the view frames and they show right to left --good
I use General-create sheets to create the layouts in my current drawing . Rather than being from left to right, it flips my plan view upside down and aligns it on the left side. Is their a viewport setting I don't know about?
Is there any way of determining your cursor position in plan when you are working in a profile or visa versa? I also work in 12d and as you move your cursor on an alignment or profile you can exactly see the position of the cursor in both layouts/views.
View 3 Replies View Relatedi have some simple profiles and just want to show the pvi's in plan view on the alignment.
i made a reference label and it works great. now i am trying to figure out if there is a quick way to locate the pvi station on plan view other than doing something like create a point using sta. and offset as parameters hand typing in the info.
I have a low pressure sewer system that runs along a road side but is not always parallel to the road. I'm using hte centerline of the road for my alignment. What I need to do is have a profile of the existing ground above the centerline of the pressure pipes show in the plan/profile sheets. I do not need a profile of the roadway.
I'm currently using feature lines to accomplish this and that works fine in the main drawing, however, the profiles I create there don't transfer to the plan/profile sheets when I create them. The only way I have found so far to get thoe profiles to show in the plan/profile sheets is to create the feature lines in the plan/profile drawing and project those lines to my profile view. This is a fairly large system so I will have numerous plan/profile sheets. Creating the feature lines and profiles in the individual sheets is fairly time consuming.
I'm currently using Civil 3D 2012. I realize that with the addition of pressure pipe networks in 2013 might very well give me the tools I need but I'm at a point in this project, and our office, where switching to 2013 isn't really an option yet. However, if that is my answer then I will have to consider that.
When I am doing my plan and profiles I have come across a couple of instances where when I am ready to plot or just switching over to the layout tab that the bottom bands of my profile have shrunk. Is thereanything that i can do to stop this or to easily restore them back to normal size? Could this be a Civil 3D 2010 issue or more likely an issue with the template that we had built for our company.
View 6 Replies View RelatedI am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View Relatedhow to show the inside diameter of structure in plan and profile view. Do I have to make sump and wall thicknesses 0 to do so?
View 5 Replies View Related