I've set up a dwt file which uses our title blocks for plan/profile drawings and everything seems to work well except that when I view the profile the text and band sizes are tiny. I have to increase them to really large numbers in order for them to work. It's a metric drawing.
The viewport in the picture has scale of 1:250 set for both annotation and standard scale. The length shown in the view is 200m.
I'm using c3d 2013. I'm setting up plan production dwt's for plan-profile, plan, profile and section.
My question is do I need to have a north arrow visible in my plan viewports layouts inside the dwt? I know when creating viewframes and sheets, the dialog has a pull down to add a north arrow at whatever orientation I choose to cut sheets. I didn't know if it will add the north arrow and rotate it based on the one already in the layout tab or if it pulls the north arrow in separately thus having 2 north arrows. Should I take out the north arrow in the plan layouts inside dwt or not?
I am trying to use Plan Production Tools. While creating frame I new what my start station was, but was not really sure how far to go so i let it create frames to the end. After i seen where the frames landed i realized i needed to erase one frame. Then i Created sheets. While looking at the sheets i have noticed i did not delete the matchline. Is there a way to delete this matchline or do i have to do all that work again?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I am an IT specialist running AutoCAD Civil 3D on about 100 computers for students at a community college.
The students recently alerted me that the Plan Production templates are missing from their accounts. I have previously watched these templates build, and they are supposed to be installed for each user the first time they run Civil 3D. (I have actually seen these files get added to the enu directory as the green bar progresses.)
At one time, these templates loaded, but now they are not. I am seeing two other folders in this directory, as wel as several other templates in the enu root directory, but not the Plan Production folder.
Civil 3D is part of a suite of CAD apps I installed on our systems that includes base AutoCAD 2013, AutoCAD Architecture, AutoCAD Electrical, AutoCAD MEP, AutoCAD Inventor, AutoCAD Mechanical, AutoCAD MAP, and AutoCAD REVIT.
Also, I have installed Civil 3D SP2 directly over the base installation without first installing SP1.
Finally, some users have told me that we should run base AutoCAD once and let that progrm make the first-time-use changes before running Civil 3D for the first time. I have tried running base AutoCAD first and Civil 3D first, and neither seems to make any difference.
I am trying to use plan production to generate sheets for a long, skinny corridor. I wanted to put two plans onto a single sheet.
I have tried a few settings, but get a duplicate of the same plan. Is this possible, or is necessary to do it manually.
I am having a "problem" with creating plan and profile sheets due to the large level differences in my profile. The plan and profile sheets are produced but the profile gets chopped off and I can't figure out how to get around it short of manually creating the sheets (which is a bit counter intuitive given Civil 3D's capabilities)
Is there a way of getting this to work??
I am trying to use the plan production feature and I've got it working pretty well except when it creates the profile view, it cuts off the data band and also makes the viewport at the very top edge of the profile, so in the viewport I can't see the data band or the top edge of the profile view.
What setting am I missing to make it show the data band?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I've read or seen a video on this before, but don't recall fix. As you can see in the attached image that half of my station label is missing, is there a fix for this. I think I recall reading you need to include a data band strictly for positioning of profile view.
View 4 Replies View RelatedI finished my pressure water pipeline plan/profile viewframe and sheets. But in order to approve it here in Brazil, I need to deliver a CD with the .DWG file without AEC Objects. My dismay is the label orientation when I run the AECObjExplode, since all my alignment labels need to be VIEW oriented. Is there a way to do run AECObjExplode so the labels stay oriented to my view frame and sheets in paper space?
View 3 Replies View RelatedI'm using the Plan Production feature of Civil3D 2012 (x64). Here's my scenario:
I have a base file with all company style and layer standards. I have an alignment and profile in this base file, which I am creating sheets for (plan and profile, same sheet). I create my VFG and generate the sheets from this base file. My sheet template creation .dwt file only has a couple layers in it (nice and clean).
Is it normal behavior for the sheet files being created to have ALL the company layers and styles associated with the base drawing where the VFG and sheets were created from? I would think only the layers/styles used for the alignment, profile, and profile view would be transferred to each sheet.
I'm using the Plan Production tools to create alignment drawings and when adding the north arrow during the process i get a error at the end stating @unable to align north arrow?
North arrow is a block and tried with base point and alignment parameters, unless i have missed something in the block creation? How do i create a north arrow block that will align with the layouts in plan production?
I am in the process of creating a .dwt to be used to generate plan & profile sheets. I have attempted to set the viewport type to either plan or profile (depending on the viewport) but it keeps resetting itself to "undefined".
View 1 Replies View RelatedI'm working with plan production sheets and having some trouble. My vertical exaggeration makes me want to split the profile, but when I do it, they get glued together. My left vertical grid numeration stays on the middle of the grid and I get a lot of information overlapped. What I need is to put some gap between these, or split'em. Other issue is that the axis offset of my Profile Style isn't being applied, as well as other configs.
View 2 Replies View RelatedI'm currently doing some testing of 2014 SP1 and noticed the Copy Styles routine when creating Plan Production Sheets doesn't seem to function as it did in 2012?
Using 2014 SP1, I data referenced a Pipe Network into a Plan Prod. sheet that was created before the Pipe networks were created. After data referencing the first Pipe Network into the plan sheet, I tried to label my pipes and structures, noticed none of our custom styles got copied (during create sheets command) into the sheet?
In 2012 they did.We have a lot of these Plan Production dwt's here and it's going to be a major PITA if all Plan Production.dwt's will need to have all Styles within them.
The nice thing about the way it used to work is the styles only needed to be maintained in a couple base.dwt's.
In addition to these Pipe & Structure label styles missing the list goes on throughout the Settings tab. Only present styles seem to be of "in use" nature such as pfl style, Alignment style, pfl view style etc. where the sheet creation process pulled specific information into the sheet dwg from source dwg.
Also did a quick test of our 2012 configuration and majority of , if not all, styles from source dwt do get copied over eliminating the need for them within the Plan Production dwt's. 2012 SP3 used here.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
In plan production, I have created the sheets (plan & profile) as a seperate drawing.
when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)
I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)
Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).
Just curious as to whether people use much colour in their production drawings, particularly for hatches...?
Working for Local Government, we tend to utilise colour hatches to show all kinds of information.
Generally, we have found that colour hatches are a good way to clearly show different areas and materials such as pavements, paths, landscape areas etc. Hatches can then be used to quickly ascertain areas for estimation and our construction team like them too as the plans tend to be easier to read.
The usual arguments about reproduction of plans and slowing down of computers doesn't seem to be an issue for us. Most photocopiers are in colour now anyway and we just make sure that even in black & white the plans are readable.
The way that Civil 3D deals with hatching doesn't seem to slow things down for us either.
Currently using Civil 3D 2013 & 2014 SP1
We have a main line (1 Alignment) and some junctions on that main line (other Alignments), and out GOAL is to create GL (General Layout) sheets, showing Shading, Setting out and Dimensions..ETC.So every VFG (View Frame Group) i can generate cut sheets from it, the Question is
1- How can i "connect" all the VFGs you see in the image attached into one VFG so that i would create them together ?
2- OR should i make separate VFGs like you see i did already , and then create cut sheets for each VFG ?
3- Or am i the only one facing this Problem ?
Using the Best Practices, different components in their own DWG files, all brought together in a production sheet where I can place the labeling for that sheet. I can add labels for Surfaces, Alignments, Pipe networks, through the Xref(s). Evidently this was not extended to Intersection Objects.
What I'm doing now is creating a new Intersection at each street intersection just so I can get a label which shows the station of each alignment at the intersection. Is there a better way to do this?
When creating multiple section views with production as the placement option, all the sections superimpose on top of each other. Attached graphic.
I tried to attach the .dwt file used for the multi section view, but the site doesn't allow upload of file extension .dwt.
How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200 ?
Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.
I have recently bought a copy of CS6 Production Premium classroom in a book. I am going through it, and am currently busy with lesson 6. In this particular lesson, I need to open a PNG file that was supplied. The PNG file is 53kb. There are a few steps after that, including selecting the object, and using "Image Trace", "Make and Expand". After this step, a few layer deletes are called for. Once all this is completed, I am supposed to save the edited file as an "AI" file. when I select the "Save as" function, browse to the location I wish to save it, and then name it and select "OK", the program freezes for a few seconds, and then I get the dreaded "Adobe Illustrator has stopped working" message. The program then closes, and I have to start again.
I have tried the following solutions so far:
1) Open the file and without any editing at all, try to save - This has the same error
2) Opened the original file in Photoshop and saved it as a PSD file
2.1) Opened the new PSD file in Illustrator and tried to save - This had the same error
3) Created a new Illustrator document. Typed some random text. tried to save as an AI file - This saved with no problems.
I am running a Windows 7 PC..here are the PC specs: Is this a known issue with the training material perhaps?
Is there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedHow can I create a own Plan and Profile Sheet?
I already spent much time trying do it but it was failed.
who have time for draw a floor plan as .dwg file? She send me a .skp File from a House but i don´t have enough experience for draw it in Auto CAD architecture file.
View 9 Replies View RelatedI'm doing an architectural plan in Autocad 2010, what I did is that I draw all my plans on a single .dwg file. Now my question is how can I print/plot one of those plans, with my template on and the plan is scaled?
View 9 Replies View RelatedI'm setting a layout - I choose plan view for my viewport, save the template and .... I have set it again to unspecified.
Civil 3D (2013) how much you have to improve....
What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.
Just looking for the main salient steps at the conceptual level.
I need to show earthwork (+ or -), EG and FG on a grid. cogo points do not seem to have reference text functionality. surface labels seems to be able to do it, but cannot give me a table.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
My delima is regarding cogo point readability. I'm used to LDD so this may be the issue. I set a cogo point but I want it to stay in the same orientation. if I use orbit or dview the cogo point data reorients (rotates) to line up horizontally. I would like the data to remain as set originally. I tried changing plan readabilty in label styles but when I drag the point it rotates to the current view orientation. Is there a way to control the rotation once dragged so it does not reorient if I change the orbit or dview?
View 9 Replies View RelatedWhat are the options for drawing utilities (namely water lines) in plan view and having them properly show in profile view?
I'm familiar with creating a polyline, turning it into a feature line, weeding vertices, etc. That works all right but is lnog-winded and really doesn't work well when dealing with lots of curves.
I am working in C3D 2011. The end station on my alignment is 163+02. The last major station label is 163+00. The label text overlap. I want to turn off the end label of 163+02. The end station is not checked in my Alignment Style or in the Geometry Points style. I am assuming there is a command in the Settings/Alignment/Commands that is overriding the changes I have made in individual styles. I have found some post concerning this from 2004 but they do not seem to be applicable in 2011.
View 5 Replies View Related
