I'm doing an architectural plan in Autocad 2010, what I did is that I draw all my plans on a single .dwg file. Now my question is how can I print/plot one of those plans, with my template on and the plan is scaled?
View 9 RepliesI wan to include the plot date and time as well as the file name when printing drawings. How will I do that?
View 4 Replies View RelatedFrom my project manager > views, I select a view, it opens in model. I change to paper space and have my plan and an isometric view (in wire frame). I go to view and select shaded with edges. Perfect, colors on both plan and isometric are where I want them, now I want to print this.
I select my print icon and change my paper size select my printer. I select extents, center the plot and fit to paper. I preview.. And my color disappears. What.. Am I doing wrong. Should I be making my paper representations from a different start?
Yesterday.. I was trying to do the same thing.. But starting with the drawing in constructs. I end up with the same, my isometric drawing looses most of its color, the windows have color as does one layer (a line showing the outline of the floor under). The plan drawing has most of the colors but some of the layers are black where in the model they have color. To further complicate the problem.. The same procedure making a first floor drawing has the plan in complete color.
Suddenly, each time that I attempt to plot or print a drawing I get the message "Errors or Warnings Found". I open it up and it shows that the plot has been cancelled. I have run all of the "traps" that I know but to no avail.
View 5 Replies View RelatedAs an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
I've set up a dwt file which uses our title blocks for plan/profile drawings and everything seems to work well except that when I view the profile the text and band sizes are tiny. I have to increase them to really large numbers in order for them to work. It's a metric drawing.
The viewport in the picture has scale of 1:250 set for both annotation and standard scale. The length shown in the view is 200m.
who have time for draw a floor plan as .dwg file? She send me a .skp File from a House but i don´t have enough experience for draw it in Auto CAD architecture file.
View 9 Replies View Relateda civil engineer sent us a .dwg file for a site survey. However, the .dwg contours are just showing up as a series of overlapping rectangles. He attached two .txt files, one for elevation point locations, the other for tree locations. Both give coordinates... i.e. :452,2718.7202,2509.7896,569.4979,GL etc. I know that the .txt file is giving locations, but I do not know how to generate plines etc. from the given coordinates in the .txt file. I downloaded ascponit.lsp, but i'm not sure if this is meant for this...
I'm using AutoCAD 2008.
I have no background with AutoCAD 2013, but my boss has given me the software and tasked me with taking entire floor plans of an individual floor .dwg and create smaller areas of each floor into separate, new .dwg's (like several rooms together) that then could be converted into .pdf's for sharing and/or printing. I have tried to find a simple tutorial or explaination of how to do this, but AutoCAD is such an amazing and complex tool that I'm having trouble with the terminology even.
I was right-clicking on the 'Model' tab to create a 'New Layout', right-clicking that to get to 'Page Set-Up Manager' and 'Modifying that to select 11 x 17, Landscape, and 'Adobe PDF' in the Printer dialog box. When I worked in the new Layout window sometimes I could zoom in to a section of the floorplan and then go to 'A' button in the upper left corner and select 'Print' and sometimes the resulting .PDF file would be that smaller section, and sometimes it would still just be the whole floorplan.
I have AutoCAD 2007 on my machine.I have made a dll using AutoCAD.NET API which does the task of plotting a DWG harness drawing to a pdf file.I specify the device name and the page size to be plotted in a AutoCAD.NET method SetPlotConfigurationName(ps,"DWG To PDF.pc3",papersize).It works fine as long as I keep on giving default paper sizes.But, when I create a custom paper size using the plot configuration editor which in turn produces a new .pc3 file and when I include the same as the device name in the above mentioned method,it does not work.It throws an exception as eInvalidInput.
View 1 Replies View RelatedI frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies View RelatedI am on a 64 bit Windows 7 HP computer with AutoCAD 2010, and I am having a problem plotting a long (24" X 190") drawing file. We have a RICOH Aficio MP W3600 PS plotter. I have gone through the proper procedure through the Plotter Manager all the way to Select Custom Paper Sizes but the Add button is grayed out and I can't add a new user size. I was able to do this with AutoCAD 2004 on a Windows XP system but can't on this setup.
View 1 Replies View RelatedI have problems printing successfully the raster embedded images within a dwg file using the xerox 6279 accxes controller plotter. I use the 6279 hpgl/2 v 15.0.5 driver but when the file is longer than 1 meter long i lose the embedded images or are misplaced anywere in the drawing. I have also the same problem using other similar files with embedded ratser images
View 1 Replies View RelatedI brought a shp file of dots representing grinder pumps into my drawing, All the dots show up just fine ovewr the aerial photo on my screen, but when plotted, the dots are absent.
View 1 Replies View RelatedHaving trouble plotting a dwg file when it is deeper than 5 folders in a directory. I was given instructions a few years ago on how to correct this, but unfortunately lost/forgot them. We just upgraded to ACAD Mechanical 2012, and I need to modify this setting again...it was something simple, I just can't remember.
View 2 Replies View Relatedexported all my user files and plot files and profile into new version of autocad 2013
now when i print a document instead of getting a monochrome plot setting it gives a greyscale affect even though using the monochrome plot file
obviously checked the plot file to see if its set correctley
this has occured on more computers around the office which is making me think it might not be the autocad
When in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
I have a problem regarding plotting high quality tiff files from cad. I need to plot a high quality tiff file (300dpi) from my drawing, but I have no understanding of how I could go about doing this. The tifout command does not produce high enough quality images.
View 9 Replies View RelatedI am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedI'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
I have used Paste Special to insert an excel schedule into my AutoCAD drawings. When I try to print to Adobe PDF the excel schedule disappears. When I print to DWG to PDF the schedule is there but the text is really heavy and the file size is extremely large. This is causing a problem when combining PDF drawing sets, the files crash. why when I try to print an excel file to Adobe PDF that the schedules disappear?
View 3 Replies View Relatedwhen i print a .dwg to a .pdf file, my computer opens the .pdf file for me to see. Might be nice for some, but for me it's a pain i the ass.
how to turn it off? Within Autocad or in Windows?
Running Win 7 with Acad 2011
Plotter: Adobe PDF Converter - Windows system Driver - by Autodesk
When trying to output a file for 3D printing I get this come up.'The maximum number of history nodes in a solid would be exceeded.You may want to convert the solid to a brep.'
View 2 Replies View RelatedI'm on a help desk where we have several users who run Win7, but can't publish any projects that have a TIFF overlay. Let me correct that. It prints, but that TIFF overlay is not included.
They print to a Xerox 6204 Wide Format printer, and every single Win7 user has this problem (32 and 64 bit). The one person that still runs XP doesn't have this problem. This sounds like a driver problem to me, but we've reinstalled the drivers and still no change.
I am trying to get my first 3d print of a model and am having problems getting it into a format that the printing service can use. I've read up and attempted stlout, 3dprint, and export commands to no avail. I get the message that the objects need to be 3dsolids or watertight meshes.
After reading all the hype on 3d printing and being very excited about it, I"ve got to say that I'm a bit overwhelmed with the steps it appears one has to take to get an architectural model to print.
The model is made with aca 2012.
I have written a program within Inventor that list all components of an assy with their properties (iproperties and properties from Producstream) and allow an export of the bill of material to Excel with our company layout.
I want to add a function to my program in order to print all drawings that belong to an assy.
I have the list of components and I want to use the new functionality of the Producstream menu that allows us to open the attached drawing.
But I don’t know which library and which property.
I have successfully printed a dwg to a pdf but instead of its file size being 450k it is 1.4 m. This makes sending pdfs via email too cumbersome. It seems that even though the outcome is B&W somewhere along the line "it" thinks it is Color. I noticed that in Page Setup I no longer have the option of "DWG to PDF.pc3".
View 5 Replies View RelatedI have a drawing file of AutoCAD 2012 with different coloured lines. When I take a print using "monochrome" option also, I get my yellow lines as light black which I don't want. I want all the elements to appear as black of same brightness. What should I do?
View 9 Replies View RelatedI import PDFs in Drawings and it takes forever to print. PDFs are only 400KB, so not big files.
View 6 Replies View RelatedAny good chart I can have that prints a sample of all the pens?
View 6 Replies View RelatedWhen I try printing to an adobe pdf file I obtain the following error:-
%%[ ProductName: Distiller ]%%
%%[ Error: limitcheck; OffendingCommand: string ]%%
Stack:
67143
/mystring
24
120
22381
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%