AutoCad 3D :: Output A File For Printing

Jun 27, 2012

When trying to output a file for 3D printing I get this come up.'The maximum number of history nodes in a solid would be exceeded.You may want to convert the solid to a brep.'

View 2 Replies


ADVERTISEMENT

Illustrator :: Printing AI File Onto 3 X 1 Label - Output Looks Pixelated

Jun 25, 2013

A customer sent us their label in an AI file. Trying to print this onto a 3 x 1 label (which is small), the output looks pixelated. Looks like the whole thing is a graphic rather than text.
 
I have attached an image of the label as an example. **Please note that the label is copyrighted. Please do not re-distribute or otherwise print.**

View 17 Replies View Related

Photoshop Elements :: Creating Large Collage - Large File Output For Printing

Mar 10, 2013

I am looking to create a collage made from 100 photos (all taken high res) to be printed large, approx 120cm x 50cm. To be able to print this size I need to keep the high resolution and hence looking for a large file output.

View 1 Replies View Related

AutoCad :: 3D Clip Printing - Unwanted Objects Showing On Output

May 31, 2011

Unwanted objects showing through your printed output (and print preview), but not showing up in the paperspace display, when using 3dclip in Acad 2011 (mechanical) ?

View 1 Replies View Related

Photoshop :: Printing Images From CS6 / Where Is Output Box

Oct 25, 2012

I have been successfully printing images from CS3 on an Epson 3880. Now that I have had to upgrade to CS6, I have a big problem. In CS3 When I went Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider down to brighten the image. I can't find Output in CS6! Since choosing Photoshop Manages Colors turns off the printer's color etc controls,

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing Image In Halftone - Output Solid Black Page

Jan 11, 2012

When printing a image in halftone from Corel x5. The image looks great in print preview but if I try printing it prints a solid black page.  

View 7 Replies View Related

AutoCAD Inventor :: STL File Output 64bit

Mar 5, 2012

I cannot output STL files in any other unit except cm.  I try changing it in the options when "saving copy as" but it doesn't stick and reverts back to cm.  The online RP quoting service I use doesn't accept cm only inch and mm. 

View 2 Replies View Related

AutoCad 3D :: Unable To Create Output File

May 23, 2012

Before rendering the program write:

make sure destination directory is writable and that the disk is not full. rendering aborted.
how could i find out where is error.

View 5 Replies View Related

AutoCad :: How To Output X / Y Value Of Line To Text File

Apr 18, 2012

I have two line in autocad file . How i can output the x and y value for line to text file ?

View 1 Replies View Related

AutoCAD 2013 :: Unable To Create Output File

Aug 27, 2013

I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:

Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.

View 2 Replies View Related

AutoCAD Civil 3D :: Reducing XML File Size Output

Aug 27, 2013

I am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.

Lidar information that I am using to create surface can be found at URL.....

View 4 Replies View Related

AutoCAD LT :: Raster Image Alignment In Output Pdf File

Oct 29, 2013

I am using a tiff file as a Raster Image Reference while drawing over it in AutoCad LT for mac. The raster file is 8200 x 5700.  If I examine the autocad drawing by zooming in closely the alignment is perfect. However, when I create an A0 pdf file of the drawing there is an alignment error between the raster image and the vector drawing on the x axis. The y axis alignment is perfect.

I believe it is a scaling error since there is no visible alignment error on the left hand side of the drawing and the error increases across the drawing to the right hand side. The error is small, about 0.2% but it is clearly visible in the pdf file.

To illustrate the problem I have put a test mark on the top right hand corner of the drawing outline and the attached file shows this portion of the drawing in autocad on the left and in the pdf file on the right.

I have tried different drivers and plot settings but the error is always there.

View 2 Replies View Related

AutoCAD Architecture :: Rendering Message - Unable To Create Output File

Mar 17, 2011

I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.

View 1 Replies View Related

AutoCAD 2010 :: Attext Output File Give A Lot Of Extra Empty Values

Jun 10, 2013

Attext output file give a lot of extra empty values when template file include attributes from more than one block.

The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.

A copy of the same attributs giving different number of values. (Block REV)

Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ'  (Block name + 6 att)

One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ'  (Block name + 17 att.)

How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks?  I use ACAD 2010.

View 4 Replies View Related

AutoCAD 2010 :: Create DAT File From Output Of LISP Program In Command Window?

Apr 18, 2013

I wrote some LISP programs. I would like to use the output data generated by LISP program in Command arear of AutoCAD. I Heard we can dave the output data into .dat files.

View 9 Replies View Related

3ds Max :: Output To PNG File

May 17, 2011

I am very new to 3DS max design and I am having what I hope is a user problem.

There is a single frame I am rendering and wanting to output to a .png file (I want a transparent background).

The output when saving as a jpg is fine. I have a black object and a white background.

The output when saving as a png is not fine. I have no objects and only the transparent background. The thumbnail preview in Windows shows a solid black image, and opening the image in gimp shows only the background - no objects.

I have also tried saving this as a TGA, but it yields the same results as the PNG.

View 6 Replies View Related

VideoStudio :: Project Output As AVI File?

Apr 12, 2012

I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:

PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo

I want to render it into the same to create an AVI master file.

I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.

ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?

I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.

View 5 Replies View Related

Illustrator :: Why CS6 Can't Output HTML File

May 23, 2012

From the save for web. Why AI cs6 can't output html file?

View 3 Replies View Related

VideoStudio :: Chapters Not Created In X3 Output File

Oct 4, 2010

I used VideoStudio Pro X3 to create a project and I created 30 chapters, but when I create the output video file (Blu-Ray NTSC H.264 1920x1080), the chapter information is not retained, so all I have is one big video file and don't have the ability to skip to other chapters.

View 2 Replies View Related

Paint Shop Pro :: Different Output File Sizes

Jan 8, 2012

version: PSPx4 SP1
OS: Win 7 Pro

When saving JPEGs, I seem to be getting wildly different resulting file sizes, depending on whether I've used Save or Save As. Case in point:

original file size from camera: 6194 KB

Save / Standard encoding / compression factor 2: 1875 KB
Save As / Standard encoding / compression factor 2: 5184 KB

Save / Lossless encoding : 1875 KB
Save As / Lossless encoding: 7235 KB

It seems to me that with x2 (my previous version), I could set the low compression factor, and the resulting Save file would actually be larger than the original. I want to be able to save with minimal compression (but I don't want to mess with TIFFs), and I need to know if I should now be using Save As instead.

Is this as designed, is it my imagination...what's going on?

View 14 Replies View Related

VideoStudio :: MPEG-4 HD Output File With Glitch

May 7, 2012

I have the following problem. I've created a project which takes about 20 minutes. The projects contains foto's and video's (MTS 1920x1080). When I create an output file in the MPEG-4 HD format there is one point is my video where there is a Glitch.

There is one MTS file in my video where I see some white flickering, which is very disturbing.

I've performed some tests to try to solve the solution, but I think it seems that there is a fault or error in the VSX file.

Below I've added some of the results of some things I've have tried:

When I drag that one MTS file in my project to another location the flickering seems to stay at the same place but then in another video.

When I remove that one MTS file from my project the flickering is gone. It's a solution, but not at this point, it should be working.

When I play the video in Windows Media Player then I see the flickering, but when I play it with Video Lan then I don't see it. If I play the video on some computer with Media Player it also should be working.

Also when I export the video in the AVCHD (1920x1080P) format the flickering doesn't occur.

View 7 Replies View Related

CorelDRAW X4 :: DWG And DXF File Version - Read And Output

Jan 27, 2008

what version on dxf/ dwg does X4 read and output? I have ver 12 and am thinking about upgrading to latest, but still working through the changes.

View 7 Replies View Related

Illustrator Scripting :: Parse CSV File And Output XML For It

Dec 18, 2012

im trying to parse a CSV file and output XML for Illustrator;

[URL]
 
here is a sample file That works,
 
[URL]
 
 
Im trying to turn this
 
[URL]
 
into something that works in Illustrator

View 1 Replies View Related

VideoStudio :: Save Output File As M2TS For PS3 Viewing?

Dec 10, 2011

I am evaluating VS Pro X4 (trial version) and one of my tests consists in importing a .m2ts clip, strip some parts of the original clip and save it in the same formats (codec, resolution, aspect ratio, file) as the imported clip.

The original clip is a NTCS HDMV file format (with the .m2ts extension), H.264 video 720p60 (16:9), digital Audio Dolby (AAC).

I'm able to do the first 2 steps without any problem. However, when I want to save the result in a file, I cannot find any way to indicate the software to save in the same format as the original clip. So I am looking for any way to save the video in a 720p60 (59.94 to be accurate) with the same video and audio codec that can be read by a PS3 console (H264, AAC) as a .m2ts file.

Is it possible to do this using VS Pro X4? Or do I need to use a non-trial version? Or do I need to use the Ultimate version? Or is it simply impossible to do this (yet)?

Things I tried:When I want to create a video file, and choose "as per project's parameters". But it appears they are set to NTSC SD for DVD-like output. If I go in the project's parameters menu, there is no way I can set the resolution to 720p60 HD.Among the AVCHD outputs in "Create a video file", I only find 1080i and 1080p resolutions. Same for Blu-Ray outputs. Why is there no 720p resolution in both outputs?In the "Customized" output, there is no way I can set the resolution to 720p60 HD. Is it normal?

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Flash File Output

Oct 8, 2012

I am using Coreldraw X5 (Version 15.2.0.686). I have a piece of document that I would want to convert to flash and put into the website.

Can't I make it to display but cannot print and cannot be altered? How come flash can print now?

View 3 Replies View Related

Illustrator :: Can't Save To PDF - No Dialog Box Open To Set Output File

May 3, 2010

I am just trying to save a PDF from my illustrator file. However, when I go to Save as, and select PDF, no dialog box opens to allow me to set how I want the file outputted. IF I just hit enter, the file does save.. its just like the Dialog box is hidden or not appearing. The reason I need the dialog box is because I need to add bleeds to the PDF and my default save doesn't do that.

View 3 Replies View Related

VideoStudio :: Photos Flickering / Stroking In MPEG Output File

Sep 11, 2013

I have created a video consisting a many photos with some video. Some photos, e.g. a horizontal close striped golf shirt, gives a flickering effect in the output video file.

I do have the anti-flickering filter checked. Ran a test with filter off, but this did not correct it. Offending photos are approx. 2.5 meg JPEGs.

View 1 Replies View Related

VideoStudio :: How To Configure Output File In Best Possible Format For Uploading To YouTube

Oct 17, 2010

how to configure an output file in the best possible format for uploading to youtube using VS X2. The youtube tutorial here is a bit out of date. My input file is as follows:

PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo

I have been creating an mpg file but I think its better to create an mpeg4 file as it is smaller and quicker to upload I think. I also want to maintain the 16:9 format.

I found the following recommendations on the youtube website: YouTube can accept almost any video format for upload, but for most users we have found the following settings give the best results.

Video Format: H.264, MPEG-2 or MPEG-4 preferred
Aspect Ratio: Native aspect ratio without letterboxing (examples: 4:3, 16:9)
Resolution: 640x360 (16:9) or 480x360 (4:3) recommended
Audio Format: MP3 or AAC preferred
Frames per second: 30
Maximum length: 10 minutes (we recommend 2-3 minutes)
Maximum file size: 1 GB

My first question is - X2 has a built in mp4 "creator". Is this one OK or is the one downloaded and installed from divx.com better? What should the frame size be? On the compression tab what should the video settings be? As my input file is 25fps does that mean that my output should be the same even though youtube recommends 30fps?

View 14 Replies View Related

GIMP :: Output File In PDF Format And CMYK Color Model

Sep 20, 2011

About once a year I ask about a capability to output a file fromGimp in pdf format and the CMYK color model. In addition it would benice if this output was in the PDF X/1-a:2001 format, to satisfycertain fussy printers. I know there are external converters likeImageMagick. It would however be nice if after all these years Gimpcatered to the needs of the printing industry.

View 4 Replies View Related

Illustrator :: Reduce Output File Size With 16 Linked Images?

Nov 10, 2012

I am making a holiday greeting card.  I have 16 very larged photo images "linked" (not embedded) into the card. The original images are very large (e.g. 4500 x 3000 px, 10mb) but I've placed them fairly small in the final card (only about 2" x 2" printed).  Therefore, I likely don't need the full resolution of the original photos.  I need to generate a final file that I can send to an online print shop, something that is ideally 10-25Mb in size, probably pdf. How to prepare the final file for export to pdf to generate as such?  Right now, the final file is 275Mb because it is embedding the full size of each of the 16 images.
 
I'm on Illustrator CS6 on Mac.

View 7 Replies View Related

Photoshop Elements :: Plugin To Output Movie File At 1400x1050?

Sep 8, 2012

Need a plug in to output movie filed from slide at a maximum size of 1400x1050.
 
Where is one to be found?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved