AutoCad :: How To Output X / Y Value Of Line To Text File
Apr 18, 2012I have two line in autocad file . How i can output the x and y value for line to text file ?
View 1 Replies
ADVERTISEMENT
AutoCAD 2010 :: Make Line Boundary Around Multi-line Text Region Corresponding To Text Mask?
Apr 27, 2010I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: 2013 Command Line Output?
Apr 15, 2013I have an issue with 2013 that I loose command line output; as in no muttering or cmdecho but I do not have anything set to that way. My cmdecho is set to 1, and nomutt is set to 0.
If I opent textscr then I can see the out put, but nothing on the command line.
I have never seen this before but it just started withing the last week or so and it makes debugging a real difficult.
AutoCAD Visual LISP / AutoLISP :: Reading A Line In Text File
Sep 27, 2011I have the following code which isnt quite working, it reads a text file which has a list of Names of images and their bottom left coordinates i.e. name x y etc. I want it to check for a name equal to that input then in this case alert the user it is found, eventually I want it to load the tile but for the moment where am I going wrong, also the lisp wont close the file and I dont know why.
(defun c:imi ()
(setq IM (getstring "
Input name of 2010 tile"))
(while (not (= "" IM))
(setq TILE (strcat "BM" IM))
[Code] ......
3ds Max :: Isometric Line Output
Oct 21, 2011I will include an attachment, but essentially we are wanting to re-create images like this (with the isometric lines) for our customers. Currently we are using AGi32 for this process, but is not very friendly with importing autocad files.
Should I be looking elsewhere in the Autodesk Suites instead of 3ds Max Design? These attachments are all from AGi32, and we are looking to move away from them.
AutoCAD LT :: Convert Single Line Text To Multi Line Text
Oct 7, 2011I need to convert single-line text into multi-line text (AutoCAD LT 2009). Will this version allow you to do so?
View 2 Replies View RelatedAutoCAD Architecture :: Single Line Text To Multi Line Text?
Dec 14, 2011I know that there was a command that would convert single line text to multi-line text but I can not find it. It use to be tt2mt or something like that.
I can not find this command in the help either. Did they get rid of this command like zoom center?
how to take multiple single line text and add them together into one multi-line text?
AutoCAD Civil 3D :: Automatic Figure And Line Creation Using CSV / Text File Format Data
Jun 18, 2012how I can go about automatic creation of figures and existing alignment (i.e. Centerline and edges) using csv/txt file data format. Currently I have to snap each line to create Centerline, edge, figures etc. a headache of work! I am using Autocad civil 3D 2012.
View 3 Replies View RelatedAutoCAD Civil 3D :: Text And Line Work In Model Space Turns Gray When Reopen File?
Sep 27, 2012For some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies View RelatedAutoCad 3D :: Output A File For Printing
Jun 27, 2012When trying to output a file for 3D printing I get this come up.'The maximum number of history nodes in a solid would be exceeded.You may want to convert the solid to a brep.'
View 2 Replies View RelatedAutoCAD Inventor :: STL File Output 64bit
Mar 5, 2012I cannot output STL files in any other unit except cm. I try changing it in the options when "saving copy as" but it doesn't stick and reverts back to cm. The online RP quoting service I use doesn't accept cm only inch and mm.
View 2 Replies View RelatedAutoCad 3D :: Unable To Create Output File
May 23, 2012Before rendering the program write:
make sure destination directory is writable and that the disk is not full. rendering aborted.
how could i find out where is error.
AutoCAD Inventor :: Plot Drivers - Text Too Light On Output?
May 9, 2012how to get line weights defined through Inventor? After printing or output to PDF I can barely read the dimensions. Is this with the drawing setup? or with the printers?
View 1 Replies View RelatedAutoCAD 2013 :: Unable To Create Output File
Aug 27, 2013I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
AutoCAD Civil 3D :: Reducing XML File Size Output
Aug 27, 2013I am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.
Lidar information that I am using to create surface can be found at URL.....
AutoCAD LT :: Raster Image Alignment In Output Pdf File
Oct 29, 2013I am using a tiff file as a Raster Image Reference while drawing over it in AutoCad LT for mac. The raster file is 8200 x 5700. If I examine the autocad drawing by zooming in closely the alignment is perfect. However, when I create an A0 pdf file of the drawing there is an alignment error between the raster image and the vector drawing on the x axis. The y axis alignment is perfect.
I believe it is a scaling error since there is no visible alignment error on the left hand side of the drawing and the error increases across the drawing to the right hand side. The error is small, about 0.2% but it is clearly visible in the pdf file.
To illustrate the problem I have put a test mark on the top right hand corner of the drawing outline and the attached file shows this portion of the drawing in autocad on the left and in the pdf file on the right.
I have tried different drivers and plot settings but the error is always there.
AutoCAD Architecture :: Rendering Message - Unable To Create Output File
Mar 17, 2011I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Create Two Line MLEADER - Only Get One Line Of Text
Jul 18, 2012I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedAutoCAD Map 3D :: Line Break In Text Label Doesn't Center 2nd Line Like It Does First
Feb 22, 2012I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
AutoCAD .NET :: Write A Text On Command Line At Same Line And Overwrite Existing
Jun 10, 2011Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
AutoCad 2D :: Convert Single Line Text To Multi-line
Mar 20, 2008We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
View 9 Replies View RelatedAutoCAD 2010 :: Attext Output File Give A Lot Of Extra Empty Values
Jun 10, 2013Attext output file give a lot of extra empty values when template file include attributes from more than one block.
The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.
A copy of the same attributs giving different number of values. (Block REV)
Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 6 att)
One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 17 att.)
How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks? I use ACAD 2010.
AutoCAD 2010 :: Create DAT File From Output Of LISP Program In Command Window?
Apr 18, 2013I wrote some LISP programs. I would like to use the output data generated by LISP program in Command arear of AutoCAD. I Heard we can dave the output data into .dat files.
View 9 Replies View Related3ds Max :: Output To PNG File
May 17, 2011I am very new to 3DS max design and I am having what I hope is a user problem.
There is a single frame I am rendering and wanting to output to a .png file (I want a transparent background).
The output when saving as a jpg is fine. I have a black object and a white background.
The output when saving as a png is not fine. I have no objects and only the transparent background. The thumbnail preview in Windows shows a solid black image, and opening the image in gimp shows only the background - no objects.
I have also tried saving this as a TGA, but it yields the same results as the PNG.
VideoStudio :: Project Output As AVI File?
Apr 12, 2012I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
Illustrator :: Why CS6 Can't Output HTML File
May 23, 2012From the save for web. Why AI cs6 can't output html file?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Writing Elevation Text In A Cad File From Text File
Jun 27, 2012Write the elevation text in a cad file from attached text file.
In this text file Easting Northing and Elevations are given. We have hundreds of that text files.
Photoshop :: Some Text Layers Might Need To Be Updated Before They Can Be Used For Vector Output
Mar 13, 2008Using Photoshop CS2, when I open files with text layers (also created in CS2, just a few minutes earlier) I get a message: "Some text layers might need to be updated before they can be used for Vector output. . ."
I'm new to Photoshop and am wondering what this means and why it's happening? Is it normal?
VideoStudio :: Chapters Not Created In X3 Output File
Oct 4, 2010I used VideoStudio Pro X3 to create a project and I created 30 chapters, but when I create the output video file (Blu-Ray NTSC H.264 1920x1080), the chapter information is not retained, so all I have is one big video file and don't have the ability to skip to other chapters.
View 2 Replies View RelatedPaint Shop Pro :: Different Output File Sizes
Jan 8, 2012version: PSPx4 SP1
OS: Win 7 Pro
When saving JPEGs, I seem to be getting wildly different resulting file sizes, depending on whether I've used Save or Save As. Case in point:
original file size from camera: 6194 KB
Save / Standard encoding / compression factor 2: 1875 KB
Save As / Standard encoding / compression factor 2: 5184 KB
Save / Lossless encoding : 1875 KB
Save As / Lossless encoding: 7235 KB
It seems to me that with x2 (my previous version), I could set the low compression factor, and the resulting Save file would actually be larger than the original. I want to be able to save with minimal compression (but I don't want to mess with TIFFs), and I need to know if I should now be using Save As instead.
Is this as designed, is it my imagination...what's going on?
VideoStudio :: MPEG-4 HD Output File With Glitch
May 7, 2012I have the following problem. I've created a project which takes about 20 minutes. The projects contains foto's and video's (MTS 1920x1080). When I create an output file in the MPEG-4 HD format there is one point is my video where there is a Glitch.
There is one MTS file in my video where I see some white flickering, which is very disturbing.
I've performed some tests to try to solve the solution, but I think it seems that there is a fault or error in the VSX file.
Below I've added some of the results of some things I've have tried:
When I drag that one MTS file in my project to another location the flickering seems to stay at the same place but then in another video.
When I remove that one MTS file from my project the flickering is gone. It's a solution, but not at this point, it should be working.
When I play the video in Windows Media Player then I see the flickering, but when I play it with Video Lan then I don't see it. If I play the video on some computer with Media Player it also should be working.
Also when I export the video in the AVCHD (1920x1080P) format the flickering doesn't occur.