AutoCAD Civil 3D :: Text And Line Work In Model Space Turns Gray When Reopen File?
Sep 27, 2012
For some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies
ADVERTISEMENT
Dec 4, 2012
I need to change the text line width in model space, not the overall text width or the text line width/weight in paper space. Our mold maker wants to measure that on screen and he wants to set the text line width to 0.060”, while the overall text width fixed.
For example, the text “REMOVE FROM BOAT” is 3” wide total from first letter R to last letter T and height 0.4”. That is easy to do. The hard part is that he wants the line in each letter to be 0.060” (1.5mm) wide. I practiced the true type text which is measurable in model space, but that is fixed with for a certain font with a certain size. I can change from one font to the other and get different thickness but cannot change the width freely to 1.5mm as requested.
View 9 Replies
View Related
Sep 12, 2012
I've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Nov 21, 2013
For some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
View 4 Replies
View Related
Dec 26, 2012
Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
View 5 Replies
View Related
Jun 17, 2013
I've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
View 2 Replies
View Related
Aug 2, 2013
I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
View 2 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
May 2, 2013
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies
View Related
Oct 24, 2012
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
View 9 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Jan 31, 2013
When I create drawings of the objects in model space but can I add text annotations, leaders, dimensions etc in paper space.
View 9 Replies
View Related
May 2, 2012
I have been working on a set of residential drawings. I Have read several different ways to achieve text size when plotting.
I currently have all my text and dimscale set to 0" height. I have the 'scale dimensions to layout (paper space)' radio button checked. However, I cannot see even the slightest hint of test when looking at my screen. I sent a dwg to a friend of mine who plotted it. no text was visible. What height should I set the text to in order to achieve an 1/8" tall plotted text? I cannot see text in either the model space or in the paper space.
View 6 Replies
View Related
Mar 15, 2013
We just installed 2013. I'm in a layout tab, a AutoCAD/C3D keeps kicking me out of model space into paper space.
View 3 Replies
View Related
Nov 1, 2006
How I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
View 9 Replies
View Related
Dec 22, 2011
line width does not display in either model or paper space, is there a way to make it display without going to print preview?
View 1 Replies
View Related
Jun 6, 2013
Whenever I type a command all of a sudden I now get the commands coming up in a grey text line (like a ghost image) and I am wondering if I accidentally touch a keystroke that enabled this because it did not appear before.
View 3 Replies
View Related
Aug 9, 2012
I use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
View 2 Replies
View Related
Nov 23, 2012
Why when I choose a new layer (which happens to have a different colour association) the colour of the new drawn line stays the same?
[URL] .....
I understand there is some setting you type in the command line to solve this problem but I am unable to find what that is.
View 2 Replies
View Related
Mar 3, 2013
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies
View Related
Apr 16, 2012
I am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
View 2 Replies
View Related
Dec 26, 2013
I have done a drawing of some house plans. I am now trying to enter text in model space, but when i enter it, it appears very small at 2.5, only if i enter at 500 it appears ok. In the layout tab the text at 500 appears very large, and when i enter 2.5 it appears ok. I have not made any changes anywhere.
View 9 Replies
View Related
Feb 26, 2013
Nearly all our drawings are done in model space with a black screen and my "Drawing Window colors|2D model space" dialogue box shows that scheme.
I have just opened a file done by one of our (recently no longer employed by us) draghtsmen and it has a grey background and when I go to the dialogue box it shows as 3D parallel projection.
I have modified the colours of the 3D parallel projection to give me what I want but I would prefer to know how to get the file back to 2D model space. The fact this guy managed it on one file suggest that there may be others lurking. How did he do it in the first place. Most of his drawings are displaying how I want them to.
View 7 Replies
View Related
Mar 1, 2013
How to rectify my model space text issues for a set of drawings. There are approximately 12 drawings which all have the same problem. I have not seen this problem in other drawings.
The text in model space appears bold and rough. I have checked that all the text is set on the 0 Z plane. I have taken the following corrective actions and have not had success:
-Confirmed text is at Z=0
-Reset the UCS to world
-Changed the Z coordinate to arbitrary number and set it back to 0
-Checked that drawing & viewports are 2-D Wireframe
-Other Desperate Measures: Purged, Audited, Created in PS then move to MS
We had a CAD temp. that set up the drawings who is no longer with us, so I have clue what he did to the drawings when setting them up.
View 6 Replies
View Related
Apr 23, 2011
Text in the model space is displayed annoyingly thick. It was always ok but something changed beyond of my knowledge in one particular project only. Can't change it back, it plots ok though.
You can compare the pictures: two different files with absolutely identical text settings... And, when I try to choose between text styles in text properties it says "The current style has been modified..." although I did not! I think both things are related some how...
I have ACad 2011..
View 9 Replies
View Related
Dec 14, 2011
Win 7 / 64b, 4GB, 3.2GHz, Quadro 600. Autocad 2008.
Anyway, I can't seem to be able to type anything in text or mtext windows. I either have my keyboard input ignored completely, or I get blank spaces, depending on what font I choose. Disabling the Aero themes don't work. All runs fine in a XP virtual machine, but more slowly.
View 3 Replies
View Related
Apr 1, 2013
Getting the proper text size in model space.
If single or multi-line text is set at a particular size, notes or dimension text for one object (like a fabrication detail) could be legible, where as text for a much larger object (like a floor plan) could be hard to read.
Is there a way to compensate for this? Or is it a matter of manually adjusting text size for every drawing component? So far, I have found the easiest way is through the Quick Properties feature.
View 4 Replies
View Related
Jun 15, 2013
Each time I go to use a color in photoshop cs6, it turns gray!
View 1 Replies
View Related
Sep 5, 2012
Why do all of my thumbnails turn grey when I try to import them? It says that I have imported them previously.
View 3 Replies
View Related
May 16, 2011
I use the command -scalelistedit to clean the strange scale , i do purge , save , close and when I re-open the drawing the bad scales are back
View 2 Replies
View Related
