AutoCAD Architecture :: Scalelistedit Doesn`t Work After Reopen
May 16, 2011I use the command -scalelistedit to clean the strange scale , i do purge , save , close and when I re-open the drawing the bad scales are back
View 2 Replies
ADVERTISEMENT
AutoCAD Architecture :: Scalelistedit Affecting AEC Content
Aug 31, 2011I have 2 files, A100 and C100, with C100 being xrefed into A100. Both have a few other xrefs in them, being used for whatever reasons, and must stay.If you open either file without the other being present, they open fine, but if they can find each other there's a 20-40 minute lockup.
C100 being a civil drawing, I thought the problem was one of the missing .shx files. So after spending countless hours trying to track it down, I finally noticed a warning when trying to open the files together that C100 had 2200+ scale lists. Using 2008 in the office, scalelistedit gives a runtime error, as well as the 2008 install at home. Using 2010, scalelistedit is successful in solving my 20-40 minute problem. (I did save back down to 2007..)
Now, back in 2008, the Style Manager won't open, as it says there is content from a newer version in the file. Also, any xrefs with AEC content, walls etc, come in without displaying said content.
AutoCAD Architecture :: Xclip In Paper Space Doesn't Work
Nov 7, 2013I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 Replies View RelatedAutoCAD Architecture :: Selecting In Menu Surface Doesn't Work
May 17, 2012After a few seconds in the program the menu with all the slides like insert,view,etc. somehow freezes. i can´t pick it anymore. the rest of the program is working,i can work on the work surface with the current tool, but choosing an ew one isn´t possible. i have this problem with different version 2011,12 and even 13....
Working isn´t possible this way.
AutoCAD Architecture :: Page-setup Transfer Doesn't Work
Apr 5, 2012ACA 2012
For office standards sake, I've created commands in drop menus that allow every employee to use various ‘standard’ page setups: for our plotter, printer and .dwg to .pdf. It's done with a lisp routine that basically looks up a .dwg with all those page setups already created (-psetupin).
Also, I've created 2 custom .pc3 files. The first is called 'Plotter' and the second is called 'Printer'. I did this in order to simply the task of (not) modifying our customization in the event of a dying printer/plotter. These .pc3 files are on our network and every user has access to them via an office profile, with the appropriate Printer Support File Path. We all have the same printer/plotter drivers.
Problem:Everything works fine, except for 2 employees. The lisp routine loads properly, as I can see it go in the command line and the page setup actually loads as well, as its name is in the page setup drop down menu, in the Plot menu. However, the page setup isn't 'selectable'. Also, if we try to 'preview' the plot we get this message: The selected layout has an invalid media configuration.
Every option in the page setup in as wanted (printer/Plotter name, scale, plot area, plot offset, etc.), EXCEPT for the paper size (even though the paper size specified in the lisp routine is available in the paper size list).
95% of the page setups work properly. The only one that don’t work are those for our plotter on paper sizes called ‘A1 (landscape)’ & ‘A0’.
I’ve created new .pc3 files, as I wanted to be sure they weren’t corrupted. We’ve reinstalled the printer/plotter drivers. I’ve reinstalled the office profile. I’ve checked that the paper sizes specified in the lisp routine were available in the .pc3 file.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
AutoCAD Architecture :: Mouse Wheel Doesn't Work On Many Of Dropdowns Anymore
Jul 7, 2011ACA12 - the mouse wheel doesn't work on many of the dropdowns anymore? Is this an 'improvement' or is there a new variable I need to learn to turn it back on.
Do autodesk have only 12 fonts on their machine? Why is the text style font name drop boxes so tiny? Makes it real time consuming to select a font when you have lots of fonts as I'd imagine most machines have.
[URL]
AutoCAD Architecture :: MTEXT Columns Become Narrow And Tall After Exit / Reopen Drawing
Sep 18, 2012Why my MTEXT columns become very narrow and tall after I exit and re-open a drawing?
View 3 Replies View RelatedAutoCAD Civil 3D :: Text And Line Work In Model Space Turns Gray When Reopen File?
Sep 27, 2012For some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies View RelatedAutoCAD Architecture :: Autodesk Doesn't Support 2008 Architecture
Sep 21, 2012I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedAutoCad 2D :: Scalelistedit Not Working
Apr 30, 2013All my drawings have loads and loads of obsolete scales on them. Trouble is, when I run the scalelistedit function, Autocad 2008 comes up with the following message:
'Unhandled exception has occurred in a component of your drawing.If you click continue, the application will ignore this error and attempt to continue.Index was outside the bounds of the array.'
This is driving me nuts because I don't know what this means and the long scale list is slowing down my work (especially when I 'copy-paste' bits of drawing from one autocad file to another.get my scalelistedit function working again!
AutoCad :: Why Scalelistedit Has Stopped Working
Jan 25, 2013why my scalelistedit has stopped working and how i can recover it to make it work again
View 3 Replies View RelatedAutoCAD 2010 :: SCALELISTEDIT Dialog Box Not Visible?
May 19, 2011Anytime I try to add a custom scale either by selecting the "custom scale" option from the paperspace viewport scale menu or by entering the command SCALELISTEDIT manually, the dialog box doesn't appear.
It's not that the box isn't opening because all other buttons and functionality are restricted in AutoCAD until I hit escape to exit out of the command. It's as if it's opening on a separate monitor, except it doesn't appear on my secondary monitor when I plug it in either.
Is there a command where I can manually add a custom scale or a property that I can change to force the box to be docked?
AutoCAD 2010 :: Scalelistedit Not Popping Up On Screen
Apr 20, 2012I need to edit the scales and add custom ones, but when i type _SCALELISTEDIT, nothing happens, I know that its selected as my layout isn't any longer, but I can't find the darn window where the scales are located. I've also tried using the menu as well. This is for ALL drawings. New and already created.
View 8 Replies View RelatedAutoCAD VB :: VBA Doesn't Work In 2010
Sep 15, 2011My company used autocad 2009 and a printing Plug-in which was made by VB,they worked perfect.But when my company uses autocad 2010,the problem rises:The printing Plug-in doesn't work.
Although I downloaded and installed the Microsoft Visual Basic for Applications Module 32bit (from URL....), the printing Plug-in can not work with autocad 2010.the commands from the plug-in cannot be recognized.
Firstly I install autocad 2010,then VBA,next printing Plug-in.Is there anything wrong?
AutoCAD .NET :: SetRGB Doesn't Work
May 8, 2012(visual studio 2010 c# and AutoCAD 2010 )I'm trying to create a new layer with ARGB color but SetRGB doesn`t work this way.
// Color is a System.Drawing.Color
private static void NewLayer(string layerName, Color layerColor)
{
LY_Rutas = gbl_doc.Layers.Add(layerName);
LY_Rutas.TrueColor.SetRGB(layerColor.R, layerColor.G, layerColor.B);
}
AutoCAD Visual LISP / AutoLISP :: CANNOSCALE / SCALELISTEDIT Creating And Setting?
May 6, 2007I would like to be able to check if an Annotation Scale already exists and if it doesn't I would like to create it using the SCALELISTEDIT command and then set it to be the curent scale. I then plan to invoke the MLEADER command.
I do not want to have to rely on adding every possible scale in the list beforehand as my program would fall appart when a user decides to set an unusual scale I haven't thought of adding to the list.
See my initial start of the program.
(defun C:MLD ()
(command "cannoscale" "1:55") ;STOPS HERE WHEN 1:55 DOES NOT EXIST
(setq IfAnnoScaleExists (getvar "CANNOSCALE"))
(command "-scalelistedit" "add" "1:55" "1:55" "e")
)
AutoCAD .NET :: Debugger Breakpoints Doesn't Work
Apr 1, 2013i am using CAD2010 & VS2012.
start external program done and no problem with attact to process.
i set breakPoints in my program then i loaded it to autocad using netload so this breakpoint doesn't work , and my program complete all code without stop at my breakpoint .
AutoCad :: Object Enabler Doesn't Work
Nov 13, 2013We have AutoCAD 2014 and 2012 currently in our office. We have a civil file that works perfectly fine with 2014 (we usually save all files down to 2010 so all our consultants can use them). When we open it in 2012 the object enabler does not seem to work only showing empty boxes with AceeLand90 text in the lower left hand corner. The civil object enabler on 2012 is up to date and the drawing was saved down to 2010. Not sure what I am missing and why it doesn't wort to have the Acee Entities shown in 2012.
View 6 Replies View RelatedAutoCAD Civil 3D :: OverlayMillAndLevel2 Doesn't Work?
Dec 6, 2013I am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies View RelatedAutoCad 2D :: Find A Polyline Which Doesn't Work
Apr 24, 2011I am trying to follow some directions and the call for a spline to be drawn onto an image. I can only find a polyline which doesnt work like I need it to. As I understand it a polyline will put a curved line as close as it can to a series of points, whereas a spline will "join the dots". I need to join the dots but with a curve not a jagged straight edge.
View 5 Replies View RelatedAutoCad :: F8 Key Doesn't Work For Ortho Mode?
Aug 10, 2013I can't use F8 key for Ortho mode in Auto Cad 2012. I checked CUI and it seems to be ok but when I press the F8 key It doesn't work. as matter of fact, after pressing F8 key, line type manager window is opened!
View 9 Replies View RelatedAutoCAD Architecture :: Annotative Symbol Doesn't Appear
Sep 8, 2011When hovering my pointer over an annotative object, the annotative symbol does not appear. This works on my other computers but not this one. Is it a setting somewhere or is it a problem with the install? I don't remember if it ever worked correctly or stopped working at some point in my learning process on ACA 2011 over the last 6 mos.
View 1 Replies View RelatedAutoCAD .NET :: Execute Scalelistedit Command With Auto Added Parameters (Reset - Yes - Exit)
Dec 4, 2012I would like to execute scalelistedit command with auto added parameters (Reset - Yes - Exit).
My
doc.SendStringToExecute("-scalelistedit R " + "
" + "Y" + "
" + "E", true, false, false);
And doesnt work - I'm getting "Invalid option" and it seems like instead of R, passing is A option (Add).
AutoCAD Inventor :: Cutout Appearance Doesn't Work
Sep 20, 2012I have a problem when I want to use a cutout.
My purpose is to get a perforated plate but Inventor doesn't show this.
Only the black color is shown and not the holes.
AutoCAD .NET :: Paletteset MinimumSize Doesn't Seem To Work When It Docked
Oct 3, 2011I created a paletteset with MinimumSize, it works fine when the paletteset is not docked to anywhere. However the MinimumSize doesn't seem to work at all. I tried to dock it to left, then I can drag the edge to really narrow.
View 1 Replies View RelatedAutoCAD LT :: Copy And Paste In Same Drawing Doesn't Work
Aug 20, 2013I'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
AutoCAD .NET :: Veto ETRANSMIT Command Doesn't Work
Sep 13, 2013I need to Veto ETRANSMIT in some cases, I stripped down my code to a msgbox that will ask if i want to Veto Or not
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServices<Assembly: ExtensionApplication(GetType(GHATransmit.Initialization))> Namespace GHATransmit Public Class Initialization Implements IExtensionApplication Public KillCommand As Boolean = False Public Sub Initialize() Implements Autodesk.AutoCAD.Runtime.IExtensionApplication.Initialize Dim dm As DocumentCollection = Application.DocumentManager Dim doc As Document = dm.MdiActiveDocument AddHandler
[code]....
Even if the e.veto has been sent to AutoCAD the ETRANSMIT command still continues.
AutoCAD Inventor :: Section View Doesn't Work
Oct 19, 2013I made an assembly, inserted a bolt and saved it to another file for thee modifications i make in the screw.
I try to make a section view with one of the origin planes, but it doesn't make
AutoCAD Map 3D :: Print Preview And Plot Doesn't Work
Sep 27, 2011I'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
AutoCAD 2010 :: Extend Command Doesn't Work
Mar 10, 2012I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
AutoCAD 2013 :: Object Enabler Doesn't Not Work?
Apr 10, 2013I am using Autocad 2013 on a 64bit PC.
I saved and run the Civil OE 64Bit. All the items shown have been selected and installed.
I can only see squares when I open a drawings that comes from the civil engineers.